- (Add) Allow to pause and resume operations (#654)
- (Add) `Layer.FirstTransitionLayer`
- (Add) `Layer.LastTransitionLayer`
- (Add) File format: Elegoo GOO
- (Add) PrusaSlicer Printer: Elegoo Mars 4
- (Improvement) Allocate maximum GPU memory for Skia up to 256 MB
- (Improvement) Set and sanitize transition layers exposure time from last bottom layer and first normal layer instead of global times (#659)
- (Change) CXDLP: Default version from 2 to 3
- (Fix) UI was not rendering with GPU (ANGLE)
- (Fix) `Layer.IsTransitionLayer` was returning the wrong value
- (Upgrade) .NET from 6.0.13 to 6.0.14
- (Add) File format: Anet N7 (#635)
- (Add) PrusaSlicer Printer: Anet N7 (#635)
- (Improvement) Each layer can now be aware of it own resolution
- (Improvement) Better set of file resolution from layers when using a compression codec other than png
- (Fix) Anet N4 printer reset on latest firmware (#633)
- (Fix) PrusaSlicer printers: Change thumbnails resolution to match file preview resolution (Fix stretch images)
- **File formats:**
- (Add) Property: DisplayTotalOnTime
- (Add) Property: DisplayTotalOffTime
- (Add) SL1File Property: high_viscosity_tilt_time
- **Tools**
- **I printed this file**
- (Add) Display on time for the print information
- (Improvement) Labels on numeric box
- (Improvement) Show print time label formatted as hh:mm:ss
- **PCB Exposure:**
- (Improvement) Increase "Exposure time" maximum from 200s to 1000s (#592)
- (Fix) Set `BottomLightHeight` to 0
- (Fix) Set `TransitionLayerCount` to 0
- **Issues:**
- (Improvement) Overhang detection by using a dynamic cross kernel
- (Improvement) Bring back the discard logic of "false-positive" islands based on overhang detection but improve the threshold of the detection to be safer (#591, #591)
- **PrusaSlicer:**
- (Change) Elegoo Mars 2 to use file version 4
- (Change) Elegoo Mars 2 Pro to use file version 4
- (Add) Status bar: On and Off time (hh:mm:ss) as tooltip in the Print time label
- (Improvement) When any of libcvextern dependencies are missing, it try to show the missing libraries in the error message (Linux only)
- (Improvement) Auto-upgrade procedure for non-Windows systems
- (Improvement) macOS arm64 (M1/M2) can now run natively if installed via the auto installer script
- (Fix) Error on Mat cache manager when file have only one layer
- (Fix) Suggestion "Transition layer count" shows as never applied when using with file formats that use in-firmware transition layers
- (Upgrade) openCV from 4.5.4 to 4.6.0
- Custom library is now built to strip unused dependencies and reduce library size
- (Remove) arch and rhel packages in favor of a generic linux
- **File formats:**
- (Add) AnyCubic PM3R (#587)
- (Add) AnyCubic PMX2
- (Fix) LGS: `LightOffDelay` is `WaitTimeBeforeCure` in this format
- **PrusaSlicer printer:**
- (Add) AnyCubic Photon M3 Premium
- (Add) AnyCubic Photon Mono X2
- (Fix) Scripting: Unable to use sub-classes (#583)
- (Fix) Loading an image as file cause application to crash
- (Fix) "File - Send to" doesn't ignore case on file extension names resulting in ignore files in a uppercase even if extension is correct
- (Fix) Do not show layer material milliliters when value is 0 or the percentage is NaN
- (Fix) Auto-upgrade on Linux with AppImage integrated on system causes the file name to grow with hash strings
- **Windows MSI installer:**
- (Add) UVtools folder to start menu with:
- UVtools
- UVtoolsCmd
- Uninstall UVtools
- (Add) Prompt for add open in UVtools when right-click on supported files
- (Add) Prompt for create desktop shortcut
- (Add) Prompt for launch UVtools after the installation
- (Improvement) Cleanup and simplify the install project
- (Add) PrusaSlicer printer: Peopoly Phenom Forge
- (Upgrade) .NET from 6.0.8 to 6.0.9
- (Fix) Corruption in file after attempt to save to a locked file (#551)
- **PrusaSlicer:**
- (Add) AnyCubic M3
- (Add) AnyCubic M3 Max
- (Add) AnyCubic M3 Plus
- (Change) AnyCubic Photon Mono 4K: Display size and remove offset from bed shape
- (Change) AnyCubic Photon Mono X 6K: Display size and remove offset from bed shape
- (Add) File format: AnyCubic PM3 and PM3M (#454)
- (Fix) Tool - Lithophane: Value unit for "Lithophane height" was in px instead of mm
- **File formats:**
- (Add) Transition layer count to the supported files and auto compute transition time on corresponding layers in software mode
- (Add) `HaveTransitionLayers`, `TransitionLayersType`, `BottomLayers`, `NormalLayers`, `TransitionLayers`, `TsmcLayers` properties
- (Add) Layer: `IsTransitionLayer` property
- (Add) SL1: Keyword `TransitionLayerCount_xxx` - Sets the number of transition layers
- (Improvement) CTB, PHZ, FDG: Implement the `ModifiedTimestampMinutes` field, it was the MysteriousId before as an unknown field
- (Fix) CWS: Open in partial mode will cause an exception and prevent file from load
- **CCode:**
- (Add) Allow inverse lifts to work as an retract
- (Fix) Parsing of WaitTimeAfterLift was incorrect when lacking a lift sequence
- (Fix) Layers lacking an exposure time was defaulting to global time, now defaults to 0
- (Fix) Layers without a LED ON (M106) was setting `LightPWM` to the max value (255), now defaults to 0
- **Tools:**
- **Timelapse:**
- (Add) Information: Raise Layer count equivalence
- (Add) Information: Additional lifts to be generated
- (Add) Option: Ensure the last layer - If enabled, it will generate an obligatory layer to cover the last layer
- (Improvement) Optimize lift for virtual layer mode, allowing set a slow and fast lift / retract by using another virtual layyer to emulate a lift
- (Improvement) Allow to define slow and fast speed for virtual layer mode even if TSMC isn't supported
- (Add) Fade exposure time: Setting 'Disable firmware transition layers' - Attempt to disable firmware strict transition layers in favor of this tool
- (Add) Calibration tests: Attempt to auto disable the firmware transifiton layers
- (Change) Edit print parameters: Allow set `BottomLiftHeight` and `LiftHeight` to 0mm
- **UI:**
- (Improvement) Disallow drop files into UI when is processing data / disabled and prevent crashing from that action
- (Improvement) Information tab visibility and MinHeight for data grids
- (Improvement) Hide/show GCode tab when necessary (dependent on file format)
- (Improvement) The 'save as' will show the new file into 'Open recent' files
- **PrusaSlicer printers:**
- (Add) Elegoo Jupiter
- (Add) EPAX X1 4KS
- (Add) EPAX DX1 Pro
- (Add) EPAX DX10 Pro 5K
- (Add) EPAX DX10 Pro 8K
- (Add) EPAX E10 8K
- (Add) EPAX X133 6K
- **PrusaSlicer:**
- (Fix) Printer: AnyCubic Photon Mono 4K - bed origin (#369)
- (Fix) Printer: AnyCubic Photon Mono X 6K - bed origin (#369)
- (Fix) Anycubic files: Soft-save on versions below 516 can corrupt the file (#396)
- (Fix) Pixel editor: Place a line on a mirrored virtual layer was previewing the line in the wrong orientation (#399)
- **PrusaSlicer:**
- (Add) Keyword 'FILEVERSION_n' to allow set the file format version/revision
- (Change) Printer: AnyCubic Photon Mono 4K and Mono X 6K, to use version 516
- **Anycubic file format:**
- (Fix) Encoding or converting a new file with version 516 was setting wrong length for the new tables
- (Fix) Setting bottom lift height or speed was not working and keep the same value
- (Add) FileFormats: Abstract `Version` property to set or get the version on file formats
- (Add) CXDLP: Compability with new file v2 revsion (#376)
- (Upgrade) AvaloniaUI from 0.10.8 to 0.10.11
- **Tool - Morph:**
- (Add) Operator: White tophat - Removes small isolated pixels and only return its affected pixels (Image - Noise removal)
- (Add) Operator: Black tophat - Closes small holes inside the objects and only return its affected pixels (Gap closing - Image)
- (Add) Operator: Hit or miss - Finds pixels in a given kernel pattern
- (Remove) Operator: 'Isolate features' as that is the same as the 'White tophat' and is already inbuilt into OpenCV
- **Kernels:**
- (Add) Option: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Add) Kernels are now saved with the operation profile
- **PrusaSlicer:**
- (Add) Support to slice files to be converted for encrypted CTB format
- (Add) Printer: Elegoo Mars 3 (#370)
- (Add) Printer: EPAX E10 5K
- (Add) Printer: EPAX X10 5K
- (Add) Printer: Phrozen Sonic Mini 8K
- (Add) Printer: Phrozen Sonic Mega 8K
- (Fix) Printer: AnyCubic Photon Mono 4K - display size (#369)
- (Fix) Printer: AnyCubic Photon Mono X 6K - display size (#369)
- (Add) Tool - Double exposure: Kernel configuration
- (Add) Tool - Pixel arithmetic: Kernel configuration
- (Add) Calibration - Elephant foot: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Fix) Calibrate - Elephant foot: Redo (Ctrl + Z) the operation was crashing the application
- (Fix) CTB, PHZ, FDG: Converting files with a null machine name would cause a exception
- (Fix) Anycubic files: Bottom lift and speed were showing default values instead of real used value
- **(Fix) CTB:**
- Converting a file to version 4 won't port the TMSC values (#271)
- Force version 3 when on version 4 and converting to photon or cbddlp
- **(Improvement) Export to SVG image:**
- Group \<g\> all layer objects
- Intersect all childs on same \<path\>
- **PrusaSlicer:**
- (Rename) Printer keywords notes:
- BottomWaitBeforeCure -> BottomWaitTimeBeforeCure
- WaitBeforeCure -> WaitTimeBeforeCure
- BottomWaitAfterCure -> BottomWaitTimeAfterCure
- WaitAfterCure -> WaitTimeAfterCure
- BottomWaitAfterLift -> BottomWaitTimeAfterLift
- WaitAfterLift -> WaitTimeAfterLift
- (Change) PrusaSlicer gcode printers to reflect the previous changes
- (Change) PrusaSlicer Creality Hallot printers with better values by default
- (Fix) PrusaSlicer printers with TMSC values was not being ported to the file format
- (Fix) CXDLP: The light-off delay is not present on the format, instead the wait time before cure is used, this was leading to high wait and print times
- (Fix) Converting from files that aren't both TSMC compatible won't set the bottom and lift height
- (Fix) Error when changing the layer collection with another with higher layer count than the previous
- **Command line arguments:**
- (Add) Convert files: UVtools.exe -c \<inputfile\> \<outputfile1/ext1\> [outputfile2/ext2]
- (Add) Extract files: UVtools.exe -e \<inputfile\> [output_folder]
- https://github.com/sn4k3/UVtools#command-line-arguments
- **File formats:**
- (Add) Implement TSMC (Two Stage Motor Control) for the supported formats
- (Add) Implement 'Bottom retract speed' for the supported formats
- (Add) LGS: Support for lgs120 and lg4k (#218)
- (Add) CTB: Special/virtual file extensions .v2.ctb, .v3.ctb, .v4.ctb to force a convertion to the set version (2 to 4). The .ctb is Version 3 by default when creating/converting files
- (Improvement) Better performance for file formats that decode images in sequential pixels groups
- **GCode:**
- (Improvement) Better parsing of the movements / lifts
- (Improvement) Better handling of lifts performed after cure the layer
- (Improvement) More fail-safe checks and sanitize of gcode while parsing
- (Improvement) CTBv3: Enable per layer settings if disabled when fast save without reencode
- (Upgrade) .NET from 5.0.8 to 5.0.9
- (Fix) PrusaSlicer printer: Longer Orange 4k with correct resolution and display size
- (Fix) Odd error when changing properties too fast in multi-thread
- **(Add) PrusaSlicer printers:**
- Creality HALOT-MAX CL-133
- Nova3D Elfin2
- Nova3D Elfin2 Mono SE
- Nova3D Elfin3 Mini
- Nova3D Bene4
- Nova3D Bene5
- Nova3D Whale
- Nova3D Whale2
- **About box:**
- (Add) Runtime information
- (Fix) Limit panels width and height to not overgrow
- **(Fix) macOS:**
- macOS version auto-upgrade (Will only work on future releases and if running v2.16.0 or greater)
- Demo file not loading
- Auto disable windows scaling factor when on Monjave or greater on new instalations
- (Add) Tool: Raise platform on print finish
- (Add) CXDLP: Support for Halot MAX CL-133
- (Improvement) Tools: Better handling/validation of tools that are unable to run with abstraction
- (Improvement) CWS: Simplify filenames inside the archive
- (Upgrade) EmguCV from 4.5.2 to 4.5.3
- (Change) Allow to set layer `LightPWM` to 0
- (Fix) Arrange dropdown arrow from layer image save icon to be at center
- **(Improvement) CWS:**
- Remove light-off delay from the format
- Sync movements with a delay time
- Auto convert the light-off delay time to wait before cure time when required
- **(Improvement) CTB:**
- When positively set the 'Wait time before cure' property on a CTBv3 or lower, it will compute the right light-off delay with that extra time into consideration
- When positively set any of the light-off delays on a CTBv4 it will auto zero the 'Wait times' properties and vice-versa
- Automation to set light-off delay on file load, will no longer do when any of 'Wait times' are defined for a CTBv4
- (Improvement) PrusaSlicer printers that use .cws format, implement the wait times on printer notes
- (Fix) GCode parser: Commented commands were being parsed
- (Fix) Exposure time information on bottom status bar was inverted, showing normal/bottom time instead of bottom/normal
- (Fix) macOS: Installing libusb is no longer a requirement
- **File formats:**
- (Add) Wait time before cure: The time to rest/wait in seconds before cure a new layer
- (Add) Wait time before after: The time to rest/wait in seconds after cure a new layer
- (Add) Wait time after lift: The time to rest/wait in seconds after a lift/peel move
- (Change) All gcode file formats dropped light-off delay field in favor of new 'Wait time before cure' field, setting light-off delay still valid but it redirects to the new field
- (Change) Reorder 'Light-off delay' before 'Exposure time'
- (Improvement) Recalculate the print time when a related property changes
- (Fix) Generic time estimation calculation was ignoring exposure times
- (Fix) Unable to load files with uppercase extensions
- (Fix) ZIP: Use G1 at end of gcode instead of G0
- (Fix) CWS: Use G1 for movements
- **(Fix) CXDLP:** (#240)
- Layer area calculation
- Validation checksum
- **(Fix) ZCODE:**
- Use G1 at end of gcode instead of G0 to prevent crash to top bug on firmware
- Put back the M18 motors off at end of gcode
- **GCode Builder/Parser:**
- (Add) Allow to choose between G0 and G1 for layer movements and end gcode
- (Fix) Safe guard: If the total print height is larger than set machine Z, do not raise/lower print on completeness
- (Fix) Light-off delay is the real delay time and not the calculated movement of the lifts plus the extra time
- (Improvement) Parse gcode line by line instead searching on a group of layers to allow a better control and identification
- **Tools:**
- **Change print parameters:**
- (Add) Tooltips to labels
- (Add) Sun UTF-8 to the Light PWM value unit to describe intensity
- (Improvement) Dynamic lifts: Round lift height and speed to 1 decimal
- (Fix) Exposure time finder: Time estimation when using 'Use different settings for layers with same Z positioning'
- **Prusa Slicer:**
- (Add) Note keyword: BottomWaitBeforeCure_xxx
- (Add) Note keyword: WaitBeforeCure_xxx
- (Add) Note keyword: BottomWaitAfterCure_xxx
- (Add) Note keyword: WaitAfterCure_xxx
- (Add) Note keyword: BottomWaitAfterLift_xxx
- (Add) Note keyword: WaitAfterLift_xxx
- (Change) Uniz IBEE: Remove light-off delay and implement wait time keywords
- **macOS:** (#236)
- (Remove) osx legacy packages from build and downloads
- (Fix) macOS: Simplify the libcvextern.dylib and remove libtesseract dependency
- (Fix) macOS: Include libusb-1.0.0.dylib
- Note: `brew install libusb` still required
- **UI:**
- (Fix) Refresh gcode does not update text on UI for ZIP, CWS, ZCODEX files
- (Fix) Operations: Import a .uvtop file by drag and drop into the UI would not load the layer range
- (Change) When convert a file, the result dialog will have Yes, No and Cancel actions, where No will open the converted file on current window, while Cancel will not perform any action (The old No behaviour)
- **File Formats:**
- (Add) SL1S: Prusa SL1S Speed
- (Add) CTB v4 support (318570758)
- (Improvement) PHOTON, CBDDLP, CTB v2, PHZ: Disallow per layer settings, beside the format support, printers never use it
- (Improvement) Longer Orange format with new found keys
- (Improvement) CXDLP: Fix the resolution from CL-60 and trigger an error when a invalid resolution was set and unable to detect the printer model
- **Prusa Slicer:**
- (Add) UVtools Prusa SL1S SPEED
- (Add) Longer Orange 120
- (Fix) Creality HALOT-ONE CL-60: Flip resolution & display and remove mirror
- (Fix) Creality HALOT-SKY CL-89: Remove mirror
- (Improvement) Longer Orange printers with better default settings
- (Add) Button on `Help - Sponsor`: Open github sponsor webpage
- **File formats:**
- (Add) CXDLP v2
- (Improved) GR1, MDLP, CXDLP decode and encode performance and memory optimization
- (Remove) CXDLP v1 from available formats
- (Add) Pixel editor - Drawing: New brushes of shapes/polygons
- (Upgrade) .NET from 5.0.6 to 5.0.7
- (Fix) When there are issues on the list, executing any operation will navigate to the last layer
- (Fix) PrusaSlicer printer: Rename "Creality HALOT-SKY CL-60" to "Creality HALOT-ONE CL-60"
- (Upgrade) AvaloniaUI from 0.10.2 to 0.10.3
- (Change) PrusaSlicer printers: Set 'Light-Off Delay' and 'Bottom Light-Off Delay' to 0 as default to allow UVtools auto-compute the right value once open the file in
- **Exposure time finder:**
- Optimize layers by merge same position/exposure layers
- Add a fence option to the zebra bars
- Add a option to pattern the loaded model and generate multiple exposures on that
- Allow to generate tests without the holes feature
- Prevent from using more chamfers than the base height
- Removed two of the largest holes
- Hide not so often used 'Multiple brightness' and 'Multiple layer height' by default
- Disable Anti-Aliasing by default
- Change 'Part margin' from 1.5mm to 2.0mm
- Change 'Multiple exposures - Bottom exposure step' default to 0
- Fix a error when generating tests with multiple exposures
- Fix some typos
- **XYZ accuracy test:**
- Change 'Wall thickess' default from 2.5mm to 3.0mm
- (Improvement) Allow compute print time without a lift sequence
- (Upgrade) AvaloniaUI from 0.10 to 0.10.2
- (Remove) Unused assemblies
- **Issues**
- Improve the performance when loading big lists of issues into the DataGrid
- Auto refresh issues on the vertical highlight tracker once cath a modification on the Issues list
- **Layer preview - Difference:**
- Layer difference will now only check the pixels inside the union of previous, current and next layer bounding rectangle, increasing the performance and speed
- Previous and next layer pixels if both exists was not showing with the configured color and using the next layer color instead
- Respect Anti-Aliasing pixels and fade colors accordingly
- Unlock the possiblity of using the layer difference on first and last layer
- Add a option to show similar pixels instead of the difference
- Change previous default color from (255, 0, 255) to (81, 131, 82) for better depth preception
- Change next default color from (0, 255, 255) to (81, 249, 252) for better depth preception
- Change previous & next default color from (255, 0, 0) to (246, 240, 216) for better depth preception
- **(Fix) Pixel editor:**
- Modification was append instead of prepend on the list
- Modification was not updating the index number on the list
- (Fix) PrusaSlicer printer: Bene4 Mono screen, bed and height size
* **File formats:**
* Add Voxeldance Tango (VDT)
* Add Makerbase MKS-DLP (MDLPv1)
* Add GR1 Workshop (GR1)
* Add Creality CXDLP (CXDLP)
* When decoding a file and have a empty resolution (Width: 0 or Height: 0) it will auto fix it by get and set the first layer image resolution to the file
* Fix when decoding a file it was already set to require a full encode, preventing fast saves on print parameters edits
* **GUI:**
* When file resolution dismatch from layer resolution, it is now possible to auto fix it by set the layer resolution to the file
* When loading a file with auto scan for issues disabled it will force auto scan for issues types that are instant to check (print height and empty layers), if any exists it will auto select issues tab
* **(Add) PrusaSlicer printers:**
* Creality HALOT-SKY CL-89
* Creality HALOT-SKY CL-60
* (Improvement) Tool - Adjust layer height: Improve the performance when multiplying layers / go with higher layer height
* (Fix) PrusaSlicer Printer - Wanhao D7: Change the auto convertion format from .zip to .xml.cws
* **File formats:**
* Add a layer height check on file load to prevent load files with more decimal digits than supported to avoid precision errors and bugs
* Fix a wrong cast causing seconds to miliseconds convertion to be caped to the wrong value
* Internally if a layer colection was replaced, all new layers will be marked as modified to avoid forgeting and ease the code
* **Tools:**
* Pixel dimming: Better render quality, it now respects AA better and produce better walls (#172)
* Elephant foot: It now respects AA better and produce better walls for wall dimming
* Layer Import: Cancelling the operation while importing layers was permanent supresseing layer properties update when changing a base property
* (Change) PrusaSlicer print profiles: Improved raft height and bottom layer count for better print success, less delamination, shorter time and reduce wear of FEP
* (Scripts): Add operation "Validate" pattern to docs and examples (#172)
* **Core:**
* Write "Unhandled Exceptions" to an "errors.log" file at user settings directory
* Increase layer height max precision from 2 to 3 decimals
* **Settings - Layer Preview:**
* Allow to set hollow line thickness to -1 to fill the area
* Add tooltip for "Auto rotate on load": Auto rotate the layer preview on file load for a landscape viewport
* Add option to masks outline color and thickness
* Add option to clear ROI when adding masks
* Add option "Auto flip on load": Auto flip the layer preview on file load if the file is marked to print mirrored on the printer LCD
* **Layer preview:**
* Add selectable rotation directions 90º (CW and CCW)
* Add preview flip (CTRL+F) horizontally and/or vertically
* Add maskable regions to process on a layer (SHIFT + Alt + Click) on a area
* ROI: Shortcut "Shift + left click" now also selects hollow black areas inside a white perimeter
* ROI: Shortcut "ESC + Shift" to clear only the ROI and leave masks in
* Fix a crash when using the pixel picker tool outside image bounds
* **Pixel editor:**
* Change drawings brush diameter limit from 255 to 4000 maximum
* When using layers below go lower than layer 0 it no longer apply the modifications
* **File formats:**
* Add an internal GCodeBuilder to generate identical gcode within formats with auto convertion, managing features and parsing information
* Internally rearrange formats properties and pass values to the base class
* Fix "Save As" filename when using formats with dual extensions
* CBDDLP and CTB: "LightPWM" was setting "BottomLightPWM" instead
* CWS: Fix problem with filenames with dots (.) and ending with numbers (#171)
* CWS: Improved the enconding and decoding performance
* CWS: Implement all available print paramenters and per layer, missing values are got from gcode interpretation
* CWS: Use set "light off delay" layer value instead of calculating it
* CWS: Get light off delay per layer parsed from gcode
* CWS - RGB flavour (Bene4 Mono): Warn about wrong resolution if width not multiples of 3 (#171)
* ZCode: Allow to set Bottom and Light intensity (LightPWM) on paramters and per layer
* ZCode: Allow to change bottom light pwm independent from normal light pwm
* LGS: Light off and bottom light off was setting the value on the wrong units
* UVJ: Unable to set per layer parameters
* **Issues:**
* When computing islands and resin traps together, they will not compute in parallel anymore to prevent CPU and tasks exaustion, it will calculate islands first and then resin traps, this should also speed up the process on weaker machines
* Gather resin trap areas together when computing for other issues to spare a decoding cycle latter
* When using a threshold for islands detection it was also appling it to the overhangs
* Fix the spare decoding conditional cycle for partial scans
* Change resin trap search from parallel to sync to prevent fake detections and missing joints at cost of speed (#13)
* **Tools:**
* Add layer selector: 'From first to current layer' and 'From current to last layer'
* I printed this file: Multiplier - Number of time(s) the file has been printed. Half numbers can be used to consume from a failed print. Example: 0.5x if a print canceled at 50% progress
* Pixel dimming: Increase wall thickness default from 5px to 10px
* Import layers: Importing layers was not marking layers as modified, then the save file won't save the new images in, to prevent other similar bugs, all layers that got replaced will be auto marked as modified
* (Add) File format: Zcode (Uniz IBEE)
* (Add) PrusaSlicer Printer: Uniz IBEE
* (Add) Extract: Output an "Layer.ini" file containing per layer data and include the Configuration.ini for Zip file formats
* (Improvement) Zip: Increase the GCode parsing performance
* (Fix) File formats: Wasn't set bottom / light off delay per individual layer on generic formats, defaulting every layer to 0
* (Fix) Edit print paramenters: When changing bottom layer count, layers didnt update thier properties
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* (Add) Calibrator - Stress Tower: Generates a stress tower to test the printer capabilities
* (Add) PrusaSlicer printer: UVtools Prusa SL1, for SL1 owners must use this profile to be UVtools compatible when using advanced tools
* (Fix) Tool - Calculator - Optimal model tilt: Layer height wasn't get pulled from loaded file and fixed to 0.05mm
* **(Fix) FileFormats:**
* When change a global print paramenter, it will only set this same parameter on every layer, keeping other parameters intact, it was reseting every parameter per layer to globals
* SL1: Verify if files are malformed and if there's missing configuration files (#126)
* CTBv3: Set EncryptionMode to 0x2000000F, this allow the use of per layer settings
* **PrusaSlicer:**
* **In this release is recommended to discard your printer and refresh it with uvtools updated printer or replace notes over**
* (Add) FILEFORMAT_XXX variable to auto-convert to that file format once open in UVtools
* (Update) Print profiles fields with new PrusaSlicer version
* (Remove) LayerOffDelay from printer notes and use only the LightOffDelay variable instead, both were being used, to avoid redundacy LayerOffDelay was dropped. Please update your printer accordingly!
* (Remove) FLIP_XY compability from printers
* (Remove) AntiAlias variable from printers
* **(Add) Settings - Automations:**
* Auto save the file after apply any automation(s)
* Auto convert SL1 files to the target format when possible and load it back
* Auto set the extra 'light-off delay' based on lift height and speed.
* (Add) Allow all and future formats to convert between them without knowing each other (Abstraction)
* (Add) XYResolution and XYResolutionUm property to file formats
* (Add) Calculator - Optimal model tilt: Calculates the optimal model tilt angle for printing and to minimize the visual layer effect
* (Add) Bottom layer count to the status bar
* **(Add) FileFormat propertiers:**
* MirrorDisplay: If images need to be mirrored on lcd to print on the correct orientation (If available)
* MaxPrintHeight: The maximum Z build volume of the printer (If available)
* (Add) ZCodex: Print paramenter light-off delay"
* (Add) SL1: Implement missing keys: host_type, physical_printer_settings_id and support_small_pillar_diameter_percent
* (Change) File formats: Round all setters floats to 2 decimals
* (Change) Island Repair: "Remove Islands Below Equal Pixels" limit from 255 to 65535 (#124)
* (Change) LightOffTime variables to LayerOffDelay
* (Fix) Files with upper case extensions doesn't load in
* **(Fix) SL1:**
* Prevent error when bottle volume is 0
* bool values were incorrectly parsed
* (Fix) **ZIP:**
* Material volume was set to grams
* Bed Y was not being set
* (Add) PrusaSlicer printers:
* Peopoly Phenom XXL
* QIDI 3D ibox mono
* Wanhao CGR Mini Mono
* Wanhao CGR Mono
* (Add) PrusaSlicer light supports profiles
* (Add) Calibration - Elephant Foot: Mirror output
* (Add) Calibration - XYZ Accuracy: Mirror output
* (Add) Calibration - Tolerance: Mirror output
* (Add) Calibration - Grayscale: Mirror output
* (Add) Scripts on github
* (Change) Save 'Display Width' and 'Height' to calibration profiles and load them back only if file format aware from these properties
* (Fix) Tool - Morph: Set a rectangular 3x3 kernel by default
* (Fix) Tool - Blur: Set a rectangular 3x3 kernel by default
* (Fix) Calibration - Elephant Foot: Include part scale on profile text
* (Fix) MSI dont store instalation path (#121)
* (Add) Pixel Dimming: Chamfer - Allow the number of walls pixels to be gradually varied as the operation progresses from the starting layer to the ending layer (#106)
* (Add) PrusaSlicer print profiles: 0.01, 0.02, 0.03, 0.04, 0.15, 0.2
* (Change) Morph: "Fade" to "Chamfer" naming, created profiles need redo
* (Change) Pixel Dimming: Allow start with 0px walls when using "Walls Only"
* (Change) PrusaSlicer print profiles names, reduced bottom layers and raft height
* (Remove) PrusaSlicer print profiles with 3 digit z precision (0.025 and 0.035)
* (Fix) PW0, PWS, PWMX, PWMO, PWMS, PWX file formats, where 4 offsets (16 bytes) were missing on preview image, leading to wrong table size. Previous converted files with UVtools wont open from now on, you need to reconvert them. (ezrec/uv3dp#124)
* (Fix) Unable to run Re-Height tool due a rounding problem on some cases (#101)
* (Fix) Layer preview end with exception when no per layer settings are available (SL1 case)
* (Add) Settings & Issues: Enable or disable Empty Layers
* (Add) PrusaSlicer Printer: Nova Bene4 Mono
* (Add) CWS: Support the GRAY2RGB and RBG2GRAY encoding for Bene Mono
* (Add) Layer issue Z map paired with layer navigation tracker bar
* (Change) Shortcuts: + and - to go up and down on layers were change to W and S keys. Reason: + and - are bound to zoom and can lead to problems
* (Upgrade) OpenCV from 4.2 to 4.3
* (Fix) CWS: Add missing Platform X,Y,Z size when converting from SL1
* (Fix) CWS: Invert XY resolution when converting from SL1
Tiago Conceição
aspadm