mirror of
https://github.com/riegera2412/UVtools.git
synced 2026-07-09 01:52:32 +02:00
master
8 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Tiago Conceição
|
15c500ecaf |
v3.5.0
- **PCB Exposure:** - (Add) Able to select multiple files and create a layer per file or merge them into one layer - (Add) Able to import files from a zip file - (Improvement) Round pixel coordinates and line thickness - (Improvement) Better position precision for primitives - (Improvement) Disable the ok button if no files were selected - (Change) Do not auto mirror based on printer lcd mirror type - (Fix) Limit line thickness to 1px minimum - (Fix) Allow leading zero omit from XY coordinates (#492) - (Fix) Mirror option was shifting the board position - (Add) Calibrate - Blooming effect: Generates test models with various strategies and increments to measure the blooming effect - (Add) Setting: Issues - Default order by, changes the default order on the issues list (#482) - (Improvement) CTBv4 and encrypted: Fetch `BottomWaitTimes` virtual property from first bottom layer that has at least 2 pixels (#483) - (Fix) Linux: Enable desktop integration for AppImages (#490) - (Fix) Extracting zip contents inside folders would cause a error and not extract those contents - (Upgrade) AvaloniaUI from 0.10.14 to 0.10.15 [Fixes auto-size problems] |
||
|
Tiago Conceição
|
4600e81b08 |
v3.0.0
- **(Add) Suggestions:**
- A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
- **Avaliable suggestions:**
- **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
- **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
- **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
- **Layer height:** Using the right layer height is important to get successful prints:
Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
- Convert the project to Nullable aware and "null-safe"
- **File Formats:**
- (Add) `Volume` property to get the total model volume
- (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
- (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
If using scripts please update them, search for `.LayerManager.` and replace by `.`
- (Change) Chitubox encrypted format can now be saved as normal
- (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
- (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
- (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
- (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
- (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
- (Improvement) Convert scripts to use Nullable code
- **UI:**
- (Add) Fluent Dark theme
- (Add) Default Light theme
- (Add) Default Dark theme
- (Change) Use fontawesome and material design to render the icons instead of static png images
- (Change) Some icons
- (Change) Move log tab to clipboard tab
- (Change) Tooltip overlay default color
- (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
- (Fix) Center image icon for layer action button
- (Fix) Center image icon for save layer image button
- **Tools:**
- (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
- (Improvement) Rotate: Unable to use an angle of 0
- (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
- (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
- (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
- (Add) More default namespaces
- (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
- (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
- This brings big performance improvements, better JIT, faster I/O operations and others
- Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
- Due this macOS requirement starts at 10.15 (Catalina)
- Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
|
||
|
Tiago Conceição
|
6629bf39f5 | Better temporary file management | ||
|
Tiago Conceição
|
a648610d59 |
v2.15.0
- **File formats:** - (Add) Wait time before cure: The time to rest/wait in seconds before cure a new layer - (Add) Wait time before after: The time to rest/wait in seconds after cure a new layer - (Add) Wait time after lift: The time to rest/wait in seconds after a lift/peel move - (Change) All gcode file formats dropped light-off delay field in favor of new 'Wait time before cure' field, setting light-off delay still valid but it redirects to the new field - (Change) Reorder 'Light-off delay' before 'Exposure time' - (Improvement) Recalculate the print time when a related property changes - (Fix) Generic time estimation calculation was ignoring exposure times - (Fix) Unable to load files with uppercase extensions - (Fix) ZIP: Use G1 at end of gcode instead of G0 - (Fix) CWS: Use G1 for movements - **(Fix) CXDLP:** (#240) - Layer area calculation - Validation checksum - **(Fix) ZCODE:** - Use G1 at end of gcode instead of G0 to prevent crash to top bug on firmware - Put back the M18 motors off at end of gcode - **GCode Builder/Parser:** - (Add) Allow to choose between G0 and G1 for layer movements and end gcode - (Fix) Safe guard: If the total print height is larger than set machine Z, do not raise/lower print on completeness - (Fix) Light-off delay is the real delay time and not the calculated movement of the lifts plus the extra time - (Improvement) Parse gcode line by line instead searching on a group of layers to allow a better control and identification - **Tools:** - **Change print parameters:** - (Add) Tooltips to labels - (Add) Sun UTF-8 to the Light PWM value unit to describe intensity - (Improvement) Dynamic lifts: Round lift height and speed to 1 decimal - (Fix) Exposure time finder: Time estimation when using 'Use different settings for layers with same Z positioning' - **Prusa Slicer:** - (Add) Note keyword: BottomWaitBeforeCure_xxx - (Add) Note keyword: WaitBeforeCure_xxx - (Add) Note keyword: BottomWaitAfterCure_xxx - (Add) Note keyword: WaitAfterCure_xxx - (Add) Note keyword: BottomWaitAfterLift_xxx - (Add) Note keyword: WaitAfterLift_xxx - (Change) Uniz IBEE: Remove light-off delay and implement wait time keywords - **macOS:** (#236) - (Remove) osx legacy packages from build and downloads - (Fix) macOS: Simplify the libcvextern.dylib and remove libtesseract dependency - (Fix) macOS: Include libusb-1.0.0.dylib - Note: `brew install libusb` still required - **UI:** - (Fix) Refresh gcode does not update text on UI for ZIP, CWS, ZCODEX files - (Fix) Operations: Import a .uvtop file by drag and drop into the UI would not load the layer range - (Change) When convert a file, the result dialog will have Yes, No and Cancel actions, where No will open the converted file on current window, while Cancel will not perform any action (The old No behaviour) |
||
|
Tiago Conceição
|
6d6be66ced |
v2.9.2
- (Upgrade) AvaloniaUI from 0.10 to 0.10.2 - (Remove) Unused assemblies - **Issues** - Improve the performance when loading big lists of issues into the DataGrid - Auto refresh issues on the vertical highlight tracker once cath a modification on the Issues list - **Layer preview - Difference:** - Layer difference will now only check the pixels inside the union of previous, current and next layer bounding rectangle, increasing the performance and speed - Previous and next layer pixels if both exists was not showing with the configured color and using the next layer color instead - Respect Anti-Aliasing pixels and fade colors accordingly - Unlock the possiblity of using the layer difference on first and last layer - Add a option to show similar pixels instead of the difference - Change previous default color from (255, 0, 255) to (81, 131, 82) for better depth preception - Change next default color from (0, 255, 255) to (81, 249, 252) for better depth preception - Change previous & next default color from (255, 0, 0) to (246, 240, 216) for better depth preception - **(Fix) Pixel editor:** - Modification was append instead of prepend on the list - Modification was not updating the index number on the list - (Fix) PrusaSlicer printer: Bene4 Mono screen, bed and height size |
||
|
Tiago Conceição
|
3f838001c7 |
v2.7.0
* **Core:** * Write "Unhandled Exceptions" to an "errors.log" file at user settings directory * Increase layer height max precision from 2 to 3 decimals * **Settings - Layer Preview:** * Allow to set hollow line thickness to -1 to fill the area * Add tooltip for "Auto rotate on load": Auto rotate the layer preview on file load for a landscape viewport * Add option to masks outline color and thickness * Add option to clear ROI when adding masks * Add option "Auto flip on load": Auto flip the layer preview on file load if the file is marked to print mirrored on the printer LCD * **Layer preview:** * Add selectable rotation directions 90º (CW and CCW) * Add preview flip (CTRL+F) horizontally and/or vertically * Add maskable regions to process on a layer (SHIFT + Alt + Click) on a area * ROI: Shortcut "Shift + left click" now also selects hollow black areas inside a white perimeter * ROI: Shortcut "ESC + Shift" to clear only the ROI and leave masks in * Fix a crash when using the pixel picker tool outside image bounds * **Pixel editor:** * Change drawings brush diameter limit from 255 to 4000 maximum * When using layers below go lower than layer 0 it no longer apply the modifications * **File formats:** * Add an internal GCodeBuilder to generate identical gcode within formats with auto convertion, managing features and parsing information * Internally rearrange formats properties and pass values to the base class * Fix "Save As" filename when using formats with dual extensions * CBDDLP and CTB: "LightPWM" was setting "BottomLightPWM" instead * CWS: Fix problem with filenames with dots (.) and ending with numbers (#171) * CWS: Improved the enconding and decoding performance * CWS: Implement all available print paramenters and per layer, missing values are got from gcode interpretation * CWS: Use set "light off delay" layer value instead of calculating it * CWS: Get light off delay per layer parsed from gcode * CWS - RGB flavour (Bene4 Mono): Warn about wrong resolution if width not multiples of 3 (#171) * ZCode: Allow to set Bottom and Light intensity (LightPWM) on paramters and per layer * ZCode: Allow to change bottom light pwm independent from normal light pwm * LGS: Light off and bottom light off was setting the value on the wrong units * UVJ: Unable to set per layer parameters * **Issues:** * When computing islands and resin traps together, they will not compute in parallel anymore to prevent CPU and tasks exaustion, it will calculate islands first and then resin traps, this should also speed up the process on weaker machines * Gather resin trap areas together when computing for other issues to spare a decoding cycle latter * When using a threshold for islands detection it was also appling it to the overhangs * Fix the spare decoding conditional cycle for partial scans * Change resin trap search from parallel to sync to prevent fake detections and missing joints at cost of speed (#13) * **Tools:** * Add layer selector: 'From first to current layer' and 'From current to last layer' * I printed this file: Multiplier - Number of time(s) the file has been printed. Half numbers can be used to consume from a failed print. Example: 0.5x if a print canceled at 50% progress * Pixel dimming: Increase wall thickness default from 5px to 10px * Import layers: Importing layers was not marking layers as modified, then the save file won't save the new images in, to prevent other similar bugs, all layers that got replaced will be auto marked as modified |
||
|
Tiago Conceição
|
0ba61780b7 |
v2.4.0
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
|
||
|
Tiago Conceição
|
097bbb867d |
v2.3.0
* **PrusaSlicer:**
* **In this release is recommended to discard your printer and refresh it with uvtools updated printer or replace notes over**
* (Add) FILEFORMAT_XXX variable to auto-convert to that file format once open in UVtools
* (Update) Print profiles fields with new PrusaSlicer version
* (Remove) LayerOffDelay from printer notes and use only the LightOffDelay variable instead, both were being used, to avoid redundacy LayerOffDelay was dropped. Please update your printer accordingly!
* (Remove) FLIP_XY compability from printers
* (Remove) AntiAlias variable from printers
* **(Add) Settings - Automations:**
* Auto save the file after apply any automation(s)
* Auto convert SL1 files to the target format when possible and load it back
* Auto set the extra 'light-off delay' based on lift height and speed.
* (Add) Allow all and future formats to convert between them without knowing each other (Abstraction)
* (Add) XYResolution and XYResolutionUm property to file formats
* (Add) Calculator - Optimal model tilt: Calculates the optimal model tilt angle for printing and to minimize the visual layer effect
* (Add) Bottom layer count to the status bar
* **(Add) FileFormat propertiers:**
* MirrorDisplay: If images need to be mirrored on lcd to print on the correct orientation (If available)
* MaxPrintHeight: The maximum Z build volume of the printer (If available)
* (Add) ZCodex: Print paramenter light-off delay"
* (Add) SL1: Implement missing keys: host_type, physical_printer_settings_id and support_small_pillar_diameter_percent
* (Change) File formats: Round all setters floats to 2 decimals
* (Change) Island Repair: "Remove Islands Below Equal Pixels" limit from 255 to 65535 (#124)
* (Change) LightOffTime variables to LayerOffDelay
* (Fix) Files with upper case extensions doesn't load in
* **(Fix) SL1:**
* Prevent error when bottle volume is 0
* bool values were incorrectly parsed
* (Fix) **ZIP:**
* Material volume was set to grams
* Bed Y was not being set
|