mirror of
https://github.com/riegera2412/UVtools.git
synced 2026-07-08 17:42:31 +02:00
master
4 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Tiago Conceição
|
816898836b |
v3.9.0
- **File formats:** - (Add) File extension: .gktwo.ctb to `ChituboxFile` to be able to convert files for UniFormation GKtwo under special CTB format - (Add) UniFormation GKtwo compatibility under CTB format, if exporting JXS rename to CTB before open - (Fix) CTB, CBDDLP, PHOTON, FDG, PHZ: Read and write files larger then 4GB (#608) - **PCB Exposure:** - (Add) Offset X/Y to offset the PCB from it origin - (Add) Allow to toggle between "Show preview image cropped by it bounds" and "Show full preview image (The final result)" - (Improvement) Use rectangle instead of line for center line primitive (#607) - (Fix) Implement rotation to polygon and center line primitives (#607) - (Fix) Macros in a single line was not being parsed (#607) - (Fix) Invert color per file was not affecting primitives - **Network printers:** - (Add) Socket requests with TCP and UDP - (Add) AnyCubic printer preset (However it can't upload a file) - (Add) Scripts in request path to allow a first request to fetch data to the final request: - A script starts with **<\?** and ends with **?>** - First parameter is the first request to get response content from - Second parameter is the regex pattern to match content with - Third parameter is the final request that supports a parameter from regex matching group, eg: **{#1}** is match Group[1] value - **Example:** <\? getfiles > {0}\/(\d+\.[\da-zA-Z]+), > printfile,{#1} ?> - (Change) Allow to print a filename without send it when upload request path is empty - (Fix) Do not show printers with empty requests - (Change) Default layer compression to Lz4 instead of Png - (Improvement) Application is now culture aware but set part of `NumberFormat` to the `InvariantCulture.NumberFormat` - (Improvement) Material cost now show with the current culture currency symbol due previous change - (Improvement) Better submit of bug reports using sections and forms - (Improvement) Linux: AppImage now have a help manual with possible arguments and parameters - (Improvement) macOS: Codesign app on auto-installer and auto-upgrade to bypass arm64 run restriction (#431) - (Improvement) macOS: Rebuilt arm64 libcvextern.dylib to run with less dependencies (#431) - (Improvement) macOS: Try to show missing dependencies from openCV (if any) on the error message - (Fix) UI: layers sorted lexicographically instead of numerically in the issues list view (#611) - (Fix) PrusaSlicer printer parameters: UniFormation GKtwo |
||
|
Tiago Conceição
|
9f7722d369 |
v3.7.0
- **File formats:** - (Add) `TransitionLayerCount` modifier to: Chitubox Zip, CWS, JXS, OSLA, PW*, UVJ, ZCodex, ZCode - (Add) Utility methods for transition layers calculation/parse - (Improvement) Calculate and set `TransitionLayerCount` property in file decode based on layer exposure time configuration - **GCode:** - (Improvement) GCode: Able to parse layer image file with appended numbers on the filename (Afecting CWS) (#577) - (Fix) Bad parsing of the file when it comes from Lychee or NovaMaker slicer (Afecting CWS) - (Fix) Incorrect parse of "Wait time before cure" from layers when printer require wait sync moves (Afecting CWS) - **Tools:** - (Add) External tests: The Complete Resin 3D Printing Settings Guide for Beginners - (Add) External tests: 9 settings for faster printing - (Improvement) Fade exposure time: Set `TransitionLayerCount` property with the affected layer count - **Suggestions:** - (Add) Transition layers: If you are printing flat on the build plate your model will print better when using a smooth transition exposure time instead of a harsh variation, resulting in reduced layer line effect and avoid possible problems due the large exposure difference. This is not so important when your model print raised under a raft/supports unaffected by the bottom exposure, in that case, it's fine to ignore this. - (Add) Model position: Printing on a corner will reduce the FEP stretch forces when detaching from the model during a lift sequence, benefits are: Reduced lift height and faster printing, less stretch, less FEP marks, better FEP lifespan, easier to peel, less prone to failure and use the screen pixels more evenly. If the model is too large to fit within the margin(s) on the screen, it will attempt to center it on that same axis to avoid touching on screen edge(s) and to give a sane margin from it. - **Status bar:** - (Add) Transition layers: 0/-0.00s - (Improvement) Change "Layer Height: 0.000mm" to "Layers: count @ 0.000mm" - (Improvement) Change "Bottom layers: 0" to "Bottom layers: 0/0.000mm" - (Change) Show user informative message about CTB Encrypted file format once per ten file loads - (Upgrade) .NET from 6.0.9 to 6.0.10 - (Fix) Windows MSI installation not upgrading well when downgrade libraries |
||
|
Tiago Conceição
|
4600e81b08 |
v3.0.0
- **(Add) Suggestions:**
- A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
- **Avaliable suggestions:**
- **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
- **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
- **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
- **Layer height:** Using the right layer height is important to get successful prints:
Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
- Convert the project to Nullable aware and "null-safe"
- **File Formats:**
- (Add) `Volume` property to get the total model volume
- (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
- (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
If using scripts please update them, search for `.LayerManager.` and replace by `.`
- (Change) Chitubox encrypted format can now be saved as normal
- (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
- (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
- (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
- (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
- (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
- (Improvement) Convert scripts to use Nullable code
- **UI:**
- (Add) Fluent Dark theme
- (Add) Default Light theme
- (Add) Default Dark theme
- (Change) Use fontawesome and material design to render the icons instead of static png images
- (Change) Some icons
- (Change) Move log tab to clipboard tab
- (Change) Tooltip overlay default color
- (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
- (Fix) Center image icon for layer action button
- (Fix) Center image icon for save layer image button
- **Tools:**
- (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
- (Improvement) Rotate: Unable to use an angle of 0
- (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
- (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
- (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
- (Add) More default namespaces
- (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
- (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
- This brings big performance improvements, better JIT, faster I/O operations and others
- Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
- Due this macOS requirement starts at 10.15 (Catalina)
- Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
|
||
|
Tiago Conceição
|
31a29d142d | pre v2.21.2 round 2 |