- (Change) `Layer.IsBottomLayer` no longer calculate the value using the position of the layer, a new property `IsBottomLayerByHeight` is now used to get that result
- (Improvement) Tool - Double exposure: Increase the bottom layer count per cloned bottom layer
- (Improvement) Calibration - Exposure time finder: Set the absolute bottom layer count accordingly when also testing for bottom time
- (Improvement) Goo: Enforce Wait times or Light-off-delay flag based on property set
- (Fix) AnyCubic and Goo: `PerLayerSetting` flag was set inverted causing printer not to follow layer settings when it should and also the otherwise (#689)
- (Fix) Tool - Scripting: Prevent from reload UI multiple times when using profiles (#694)
- (Improvement) CXDLP: Better parse of machine model from PrusaSlicer profile (#351)
- (Fix) OSF: Printer freezes at first layer (#657)
- (Upgrade) AvaloniaUI from 0.10.18 to 0.10.19
- **UI:**
- (Improvement) Layer navigation load time by parallel `Mat` to `Bitmap` conversion
- (Improvement) Allow to show exceptions without the stack trace and detailed trigger action by using the `MessageExceiption` (#644)
- (Improvement) Allow progress to have and display a detailed log (#644)
- (Improvement) Convert format to another with multiple versions will now only show the possible versions for the extension
- **Suggestion - Wait time before cure:**
- (Improvement) Set the first wait time based on first valid layer mass rather than use the fixed limit
- (Improvement) Set zero time to empty and dummy layers
- (Improvement) When creating the dummy layer also increment the bottom layer count as the created layer count as one
- **PCB Exposure:**
- (Add) Excellon Drill Format (drl) to cut off holes (Implementation may lack some advanced features, please confirm the result) (#646)
- (Fix) Arc (G03) with negative offsets (I-/J-) was not drawing the shape correctly
- (Fix) Implement the rotation for the outline primitive (#645)
- **File formats:**
- (Improvement) Formats now sanitize the selected version before encode given the file extension, if version is out of range it will force the last known version
- (Fix) CBDDLP: Remove a table from the file that might cause layer corruption
- (Add) Operations - `AfterCompleteReport` property: Gets or sets an report to show to the user after complete the operation with success
- (Improvement) Suggestion - Wait time after cure: Set zero time to empty and dummy layers
- (Improvement) Slight improvement on the contour intersection check, yields better performance on resin and suction cup detection
- (Improvement) Allow to trigger message boxes from operations and scripts (#644)
- (Upgrade) .NET from 6.0.12 to 6.0.13
- **UVtoolsCmd:**
- **print-properties:**
- (Change) `-b`, `--base` option to `-a`, `-all` to indicate all properties and sub-properties, now defaults to only show base properties
- (Add) `-r`, `--range` option to prints only the matching layer(s) index(es) in a range
- (Add) `-i`, `--indexes` option to prints only the matching layer(s) index(es)
- (Add) Command: `set-properties <input-file> <property=value> Set properties in a file or to it layers with new values`
- (Add) Command: `print-issues <input-file> Detect and print issues in a file`
- (Add) New option to the `run` command: `-p, --property <property=value> Set a property with a new value (Compatible with operations only)`
- (Remove) Command: `print-layers` as it has been moved to `print-properties`, use `-r :` to obtain same result as default on `print-layers`
- **Issues:**
- (Fix) Issues groups with only one issue was displaying the wrong area value
- (Fix) Volume incorrectly calculated, resulting in a high value for group of issues
- (Fix) Incorrect calculation of the bounding rectangle for a group of issues
- **Repair layers:**
- (Add) Switch to opt between "Re-detect the selected issues before repair" and "Use and repair the previous detected issues" (Default)
- (Improvement) Do not allow to run the tool if there are no detected issues when the option "Use and repair the previous detected issues" is selected
- (Improvement) Linux: Recompile libcvextern.so on a older system to be able to run on both older and newest system (#603)
- (Upgrade) .NET from 6.0.10 to 6.0.11
- **Tools:**
- **PCB Exposure:**
- (Add) Allow to scale the drawing sizes per gerber file
- (Add) Allow to invert the drawing polarity per gerber file (#592)
- (Add) Allow to drag and drop files into "Add files" button and grid header
- (Improvement) Do not add empty layers when usable to draw or when draw a all black image
- (Improvement) "Merge all gerbers into one layer" will now draw all gerber into one image instead of perform the Max(of all gerbers pixels), allowing to subtract areas as they are on gerbers
- **Import layers:** Fix error when trying to insert layers
- **Export layers images:** Better compression of contours for SVG export, resulting in smooth curves, better visuals and lower file size
- (Add) Outline: Triangulate
- (Remove) Avalonia.Diagnostics dependency in release mode
- **File formats:**
- (Add) Property: DisplayTotalOnTime
- (Add) Property: DisplayTotalOffTime
- (Add) SL1File Property: high_viscosity_tilt_time
- **Tools**
- **I printed this file**
- (Add) Display on time for the print information
- (Improvement) Labels on numeric box
- (Improvement) Show print time label formatted as hh:mm:ss
- **PCB Exposure:**
- (Improvement) Increase "Exposure time" maximum from 200s to 1000s (#592)
- (Fix) Set `BottomLightHeight` to 0
- (Fix) Set `TransitionLayerCount` to 0
- **Issues:**
- (Improvement) Overhang detection by using a dynamic cross kernel
- (Improvement) Bring back the discard logic of "false-positive" islands based on overhang detection but improve the threshold of the detection to be safer (#591, #591)
- **PrusaSlicer:**
- (Change) Elegoo Mars 2 to use file version 4
- (Change) Elegoo Mars 2 Pro to use file version 4
- (Add) Status bar: On and Off time (hh:mm:ss) as tooltip in the Print time label
- (Improvement) When any of libcvextern dependencies are missing, it try to show the missing libraries in the error message (Linux only)
- (Improvement) Auto-upgrade procedure for non-Windows systems
- (Improvement) macOS arm64 (M1/M2) can now run natively if installed via the auto installer script
- (Fix) Error on Mat cache manager when file have only one layer
- (Fix) Suggestion "Transition layer count" shows as never applied when using with file formats that use in-firmware transition layers
- (Upgrade) openCV from 4.5.4 to 4.6.0
- Custom library is now built to strip unused dependencies and reduce library size
- (Remove) arch and rhel packages in favor of a generic linux
- **File formats:**
- (Add) `TransitionLayerCount` modifier to: Chitubox Zip, CWS, JXS, OSLA, PW*, UVJ, ZCodex, ZCode
- (Add) Utility methods for transition layers calculation/parse
- (Improvement) Calculate and set `TransitionLayerCount` property in file decode based on layer exposure time configuration
- **GCode:**
- (Improvement) GCode: Able to parse layer image file with appended numbers on the filename (Afecting CWS) (#577)
- (Fix) Bad parsing of the file when it comes from Lychee or NovaMaker slicer (Afecting CWS)
- (Fix) Incorrect parse of "Wait time before cure" from layers when printer require wait sync moves (Afecting CWS)
- **Tools:**
- (Add) External tests: The Complete Resin 3D Printing Settings Guide for Beginners
- (Add) External tests: 9 settings for faster printing
- (Improvement) Fade exposure time: Set `TransitionLayerCount` property with the affected layer count
- **Suggestions:**
- (Add) Transition layers: If you are printing flat on the build plate your model will print better when using a smooth transition exposure time instead of a harsh variation, resulting in reduced layer line effect and avoid possible problems due the large exposure difference.
This is not so important when your model print raised under a raft/supports unaffected by the bottom exposure, in that case, it's fine to ignore this.
- (Add) Model position: Printing on a corner will reduce the FEP stretch forces when detaching from the model during a lift sequence, benefits are: Reduced lift height and faster printing, less stretch, less FEP marks, better FEP lifespan, easier to peel, less prone to failure and use the screen pixels more evenly.
If the model is too large to fit within the margin(s) on the screen, it will attempt to center it on that same axis to avoid touching on screen edge(s) and to give a sane margin from it.
- **Status bar:**
- (Add) Transition layers: 0/-0.00s
- (Improvement) Change "Layer Height: 0.000mm" to "Layers: count @ 0.000mm"
- (Improvement) Change "Bottom layers: 0" to "Bottom layers: 0/0.000mm"
- (Change) Show user informative message about CTB Encrypted file format once per ten file loads
- (Upgrade) .NET from 6.0.9 to 6.0.10
- (Fix) Windows MSI installation not upgrading well when downgrade libraries
- **Layer:**
- (Add) Property: `LayerMatBoundingRectangle`
- (Add) Property: `LayerMatModelBoundingRectangle`
- (Add) Method: `GetLayerMat(roi)`
- **Issues:**
- **Islands:**
- (Improvement) Islands detection performance
- (Improvement) Required area to consider an island is now real area instead of bounding box area
- (Fix) Logic bug when combining with overhangs
- **Overhangs:**
- (Improvement) Overhangs detection performance
- (Improvement) Overhangs are now split and identified as separately in the layer
- (Improvement) Overhangs now shows the correct issue area and able to locate the problem region more precisely
- (Improvement) Compress overhangs into contours instead of using whole pixels, resulting in better render performance and less memory to hold the issue
- (Fix) Bug in overhang logic causing to detect the problem twice when combined with supports
- (Improvement) Touching bounds check logic to spare cycles
- **Tool - Raise platform on print finish:**
- (Add) Preset "Minimum": Sets to the minimum position
- (Add) Preset "Medium": Sets to half-way between minimum and maximum position
- (Add) Preset "Maximum": Sets to the maximum position
- (Add) Wait time: Sets the ensured wait time to stay still on the desired position.
This is useful if the printer firmware always move to top and you want to stay still on the set position for at least the desired time.
Note: The print time calculation will take this wait into consideration and display a longer print time.
- (Add) FileFormat: AnyCubic custom machine (.pwc)
- (Downgrade) OpenCV from 4.5.5 to 4.5.4 due a possible crash while detecting islands (Windows)
- **Windows MSI installer:**
- (Add) UVtools folder to start menu with:
- UVtools
- UVtoolsCmd
- Uninstall UVtools
- (Add) Prompt for add open in UVtools when right-click on supported files
- (Add) Prompt for create desktop shortcut
- (Add) Prompt for launch UVtools after the installation
- (Improvement) Cleanup and simplify the install project
- (Add) PrusaSlicer printer: Peopoly Phenom Forge
- (Upgrade) .NET from 6.0.8 to 6.0.9
- (Fix) Corruption in file after attempt to save to a locked file (#551)
- **File formats:**
- (Add) OSF (Vlare Open File Format)
- (Fix) CTB Encrypted: Bottom Retract Height for TSMC was constraining incorrectly with the normal total retract height
- (Fix) CWS: Only issue `;<Slice>` command when the exposure is about to happen (#514)
- **GCode:**
- (Add) Command `CommandWaitSyncDelay` for movement wait sync delay instead of depending on G4 wait command
- (Fix) Wrong parsing and set of wait times when using a wait after lift / wait before retract
- (Improvement) Auto update: Make sure the download url exists before attempt the download, if not, instead it will prompt for manual download and update
- (Improvement) MacOS: Remove `com.apple.quarantine` flag from the auto downloaded files
- (Upgrade) .NET from 6.0.7 to 6.0.8
- (Upgrade) AvaloniaUI from 0.10.17 to 0.10.18
- **Tools**
- **PCB Exposure:**
- (Add) Able to choose the size midpoint rounding method (#520)
- (Fix) Allow to flash alone D03 commands (#520)
- (Fix) Correct line thickness to have at least 1px error (#523)
- (Improvement) Layer arithmetic: Use ; to split and start a new arithmetic operation
- (Add) Cmd: Convert command now allow to pass 'auto' as target type to auto convert specific files, valid for SL1 files configured with FILEFORMAT_xxx (#522)
- (Add) GCode: Command to sync and wait for movement completion [Only enabled for cws format] (#514)
- (Add) VDT: Transition layer count
- (Upgrade) AvaloniaUI from 0.10.16 to 0.10.17
- **Tools:**
- (Add) PCB exposure: Converts a gerber file to a pixel perfect image given your printer LCD/resolution to exposure the copper traces.
- (Improvement) Export settings now indent the XML to be more user friendly to edit
- (Improvement) Layer import: Allow to have profiles
- (Improvement) Layer import: Validates if selected files exists before execute
- (Fix) Lithophane: Disallow having start threshold equal to end threshold
- (Add) Windows explorer: Right-click on files will show "Open with UVtools" on context menu which opens the selected file on UVtools (Windows MSI only)
- (Improvement) Island and overhang detection: Ignore detection on all layers that are in direct contact with the plate (On same first layer position)
- (Improvement) Cmd: Better error messages for convert command when using shared extensions and no extension
- **(Add) Suggestions:**
- A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
- **Avaliable suggestions:**
- **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
- **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
- **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
- **Layer height:** Using the right layer height is important to get successful prints:
Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
- Convert the project to Nullable aware and "null-safe"
- **File Formats:**
- (Add) `Volume` property to get the total model volume
- (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
- (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
If using scripts please update them, search for `.LayerManager.` and replace by `.`
- (Change) Chitubox encrypted format can now be saved as normal
- (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
- (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
- (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
- (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
- (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
- (Improvement) Convert scripts to use Nullable code
- **UI:**
- (Add) Fluent Dark theme
- (Add) Default Light theme
- (Add) Default Dark theme
- (Change) Use fontawesome and material design to render the icons instead of static png images
- (Change) Some icons
- (Change) Move log tab to clipboard tab
- (Change) Tooltip overlay default color
- (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
- (Fix) Center image icon for layer action button
- (Fix) Center image icon for save layer image button
- **Tools:**
- (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
- (Improvement) Rotate: Unable to use an angle of 0
- (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
- (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
- (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
- (Add) More default namespaces
- (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
- (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
- This brings big performance improvements, better JIT, faster I/O operations and others
- Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
- Due this macOS requirement starts at 10.15 (Catalina)
- Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
- **File formats:**
- (Add) Transition layer count to the supported files and auto compute transition time on corresponding layers in software mode
- (Add) `HaveTransitionLayers`, `TransitionLayersType`, `BottomLayers`, `NormalLayers`, `TransitionLayers`, `TsmcLayers` properties
- (Add) Layer: `IsTransitionLayer` property
- (Add) SL1: Keyword `TransitionLayerCount_xxx` - Sets the number of transition layers
- (Improvement) CTB, PHZ, FDG: Implement the `ModifiedTimestampMinutes` field, it was the MysteriousId before as an unknown field
- (Fix) CWS: Open in partial mode will cause an exception and prevent file from load
- **CCode:**
- (Add) Allow inverse lifts to work as an retract
- (Fix) Parsing of WaitTimeAfterLift was incorrect when lacking a lift sequence
- (Fix) Layers lacking an exposure time was defaulting to global time, now defaults to 0
- (Fix) Layers without a LED ON (M106) was setting `LightPWM` to the max value (255), now defaults to 0
- **Tools:**
- **Timelapse:**
- (Add) Information: Raise Layer count equivalence
- (Add) Information: Additional lifts to be generated
- (Add) Option: Ensure the last layer - If enabled, it will generate an obligatory layer to cover the last layer
- (Improvement) Optimize lift for virtual layer mode, allowing set a slow and fast lift / retract by using another virtual layyer to emulate a lift
- (Improvement) Allow to define slow and fast speed for virtual layer mode even if TSMC isn't supported
- (Add) Fade exposure time: Setting 'Disable firmware transition layers' - Attempt to disable firmware strict transition layers in favor of this tool
- (Add) Calibration tests: Attempt to auto disable the firmware transifiton layers
- (Change) Edit print parameters: Allow set `BottomLiftHeight` and `LiftHeight` to 0mm
- **UI:**
- (Improvement) Disallow drop files into UI when is processing data / disabled and prevent crashing from that action
- (Improvement) Information tab visibility and MinHeight for data grids
- (Improvement) Hide/show GCode tab when necessary (dependent on file format)
- (Improvement) The 'save as' will show the new file into 'Open recent' files
- **PrusaSlicer printers:**
- (Add) Elegoo Jupiter
- (Add) EPAX X1 4KS
- (Add) EPAX DX1 Pro
- (Add) EPAX DX10 Pro 5K
- (Add) EPAX DX10 Pro 8K
- (Add) EPAX E10 8K
- (Add) EPAX X133 6K
- **Pixel Arithmetic:**
- (Add) Corode: Noise pixel area, defaulting to 3px2
- (Change) Corode: Cryptonumeric random to normal random to speed up calculation
- (Change) Fuzzy skin preset: Set a ignore threshold area of 5000px2
- (Improvement) Masking performance and auto crop the layer to speed up the processing when using an "Apply to" other than "All"
- (Fix) Some "Apply to" methods was creating a wrong mask with some operators
- **CXDLP V3:**
- (Fix) Checksum (CRC32) (#389)
- (Fix) Software name and material name serialization
- **Tool - Morph:**
- (Add) Operator: White tophat - Removes small isolated pixels and only return its affected pixels (Image - Noise removal)
- (Add) Operator: Black tophat - Closes small holes inside the objects and only return its affected pixels (Gap closing - Image)
- (Add) Operator: Hit or miss - Finds pixels in a given kernel pattern
- (Remove) Operator: 'Isolate features' as that is the same as the 'White tophat' and is already inbuilt into OpenCV
- **Kernels:**
- (Add) Option: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Add) Kernels are now saved with the operation profile
- **PrusaSlicer:**
- (Add) Support to slice files to be converted for encrypted CTB format
- (Add) Printer: Elegoo Mars 3 (#370)
- (Add) Printer: EPAX E10 5K
- (Add) Printer: EPAX X10 5K
- (Add) Printer: Phrozen Sonic Mini 8K
- (Add) Printer: Phrozen Sonic Mega 8K
- (Fix) Printer: AnyCubic Photon Mono 4K - display size (#369)
- (Fix) Printer: AnyCubic Photon Mono X 6K - display size (#369)
- (Add) Tool - Double exposure: Kernel configuration
- (Add) Tool - Pixel arithmetic: Kernel configuration
- (Add) Calibration - Elephant foot: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Fix) Calibrate - Elephant foot: Redo (Ctrl + Z) the operation was crashing the application
- (Fix) CTB, PHZ, FDG: Converting files with a null machine name would cause a exception
- (Fix) Anycubic files: Bottom lift and speed were showing default values instead of real used value
- **File - Send to:**
- (Add) Icons to distinguish each send type
- (Add) Allow to configure processes to open the file with (#352)
- (Improvement) CXDLP: When encoding the file, only attempt to change the machine name if not starts with 'CL-' (#351)
- (Improvement) UI: Remove the "0/?" and just show the title on the progress bar
- (Change) CTBv4: Remove the following validation to be compatible with lychee and CTB SDK: "Malformed file, PrintParametersV4 found invalid validation values, expected (4, 4) got (x, y)" (#354)
- Issues:
- (Add) Suction cups: Add a auto repair feature for this issues by drill a vertical vent hole (#296)
- (Add) Layer issue track bar: Colorize the issue tracker map with it own colors (Configurable)
- (Add) Allow to group issues by type and/or layer
- (Improvement) Order issues by area in descending order
- (Improvement) Always bring the selected issue into view on the list
- (Fix) When manually removing a issue from the list, it will no longer reselect other and make the user lost track of the remove issue
- (Fix) Allow to ignore all issue type
- (Fix) Material ml calculation was calculating a bad value for PhotonWorkshop files
- (Upgrade) EmguCV from 4.5.1 to 4.5.2
- **File formats:**
- (Add) Getter `IsAntiAliasingEmulated`: Gets whatever a file format uses real or emulated AntiAliasing
- (Add) Getter `IsDisplayPortrait`: Gets if the display is in portrait mode
- (Add) Getter `IsDisplayLandscape`: Gets if the display is in landscape mode
- **Tool - Resize:** (#235)
- (Fix) Division by 0 when start layer is equal to end layer
- (Fix) Calculations when using the option "Increase or decrease towards 100%"
- (Add) About window: OpenCV build number and a button to copy build information to clipboard
- (Improvement) Exposure exposure finder: Improve the **Multiple brightness** section to auto fill with correct values for file formats that use time fractions to emulate AntiAliasing, this can be used to replace the **Multiple exposures** section
- (Fix) UVJ: Error when using a null or empty layer array on manifest `config.json` file (#232)
- (Fix) GCode parser: When only a G4/wait command is present on a layer it was setting the global exposure time and discard the this value per layer
- **File formats:**
- (Add) CXDLP v2
- (Improved) GR1, MDLP, CXDLP decode and encode performance and memory optimization
- (Remove) CXDLP v1 from available formats
- (Add) Pixel editor - Drawing: New brushes of shapes/polygons
- (Upgrade) .NET from 5.0.6 to 5.0.7
- (Fix) When there are issues on the list, executing any operation will navigate to the last layer
- (Fix) PrusaSlicer printer: Rename "Creality HALOT-SKY CL-60" to "Creality HALOT-ONE CL-60"
- **Layer arithmetic:**
- (Add) Allow to use ':' to define a layer range to set, eg, 0:20 to select from 0 to 20 layers
- (Improvement) Modifications with set ROI and/or Mask(s) are only applied to target layer on that same regions
- (Improvement) Disallow set one layer to the same layer without any modification
- (Improvement) Clear and sanitize non-existing layers indexes
- (Improvement) Disable the layer range selector from dialog
- (Fix) Prevent error when using non-existing layers indexes
- (Fix) Allow use only a mask for operations
- (Fix) Implement the progress bar
- **File formats:**
- (Add) VDA.ZIP (Voxeldance Additive)
- (Improvement) Add a check to global `LightPWM` if 0 it will force to 255
- (Improvement) Add a check to layer `LightPWM` if 0 it will force to 255
- (Add) Allow to save the selected region (ROI) to a image file
- (Update) .NET 5.0.5 to 5.0.6
- (Fix) Getting the transposed rectangle in fliped images are offseting the position by -1
- (Fix) Tools: Hide ROI Region text when empty/not selected
- (Improvement) Applied some refactorings on code
- (Fix) MDLP, GR1 and CXDLP: Bad enconde of display width, display height and layer height properties
- (Upgrade) AvaloniaUI from 0.10.2 to 0.10.3
- (Change) PrusaSlicer printers: Set 'Light-Off Delay' and 'Bottom Light-Off Delay' to 0 as default to allow UVtools auto-compute the right value once open the file in
- **Exposure time finder:**
- Optimize layers by merge same position/exposure layers
- Add a fence option to the zebra bars
- Add a option to pattern the loaded model and generate multiple exposures on that
- Allow to generate tests without the holes feature
- Prevent from using more chamfers than the base height
- Removed two of the largest holes
- Hide not so often used 'Multiple brightness' and 'Multiple layer height' by default
- Disable Anti-Aliasing by default
- Change 'Part margin' from 1.5mm to 2.0mm
- Change 'Multiple exposures - Bottom exposure step' default to 0
- Fix a error when generating tests with multiple exposures
- Fix some typos
- **XYZ accuracy test:**
- Change 'Wall thickess' default from 2.5mm to 3.0mm
- (Improvement) Allow compute print time without a lift sequence
- (Upgrade) AvaloniaUI from 0.10 to 0.10.2
- (Remove) Unused assemblies
- **Issues**
- Improve the performance when loading big lists of issues into the DataGrid
- Auto refresh issues on the vertical highlight tracker once cath a modification on the Issues list
- **Layer preview - Difference:**
- Layer difference will now only check the pixels inside the union of previous, current and next layer bounding rectangle, increasing the performance and speed
- Previous and next layer pixels if both exists was not showing with the configured color and using the next layer color instead
- Respect Anti-Aliasing pixels and fade colors accordingly
- Unlock the possiblity of using the layer difference on first and last layer
- Add a option to show similar pixels instead of the difference
- Change previous default color from (255, 0, 255) to (81, 131, 82) for better depth preception
- Change next default color from (0, 255, 255) to (81, 249, 252) for better depth preception
- Change previous & next default color from (255, 0, 0) to (246, 240, 216) for better depth preception
- **(Fix) Pixel editor:**
- Modification was append instead of prepend on the list
- Modification was not updating the index number on the list
- (Fix) PrusaSlicer printer: Bene4 Mono screen, bed and height size
* **File formats:**
* PhotonS: Implement the write/encode method to allow to use this format and fix the thumbnail
* VDT: Allow to auto convert the .vdt to the target printer format using the Machine - Notes, using a flag: FILEFORMAT_YourPrinterExtension, for example: FILEFORMAT_CTB
* (Fix) Unable to convert files with no thumbnails to other file format that requires thumbnails
* **Tools:**
* (Add) Re-height: Option to Anti-Aliasing layers
* (Fix) Morph and Blur: The combobox was not setting to the selected item when preform a redo operation (Ctrl+Shift+Z)
* **GUI:**
* (Change) Progress window to be a grid element inside MainWindow, this allow to reuse the graphics and its elements without the need of spawning a Window instance everytime a progress is shown, resulting in better performance and more fluid transaction
* (Improvement) Clear issues when generating calibration tests
* **Core:**
* Write "Unhandled Exceptions" to an "errors.log" file at user settings directory
* Increase layer height max precision from 2 to 3 decimals
* **Settings - Layer Preview:**
* Allow to set hollow line thickness to -1 to fill the area
* Add tooltip for "Auto rotate on load": Auto rotate the layer preview on file load for a landscape viewport
* Add option to masks outline color and thickness
* Add option to clear ROI when adding masks
* Add option "Auto flip on load": Auto flip the layer preview on file load if the file is marked to print mirrored on the printer LCD
* **Layer preview:**
* Add selectable rotation directions 90º (CW and CCW)
* Add preview flip (CTRL+F) horizontally and/or vertically
* Add maskable regions to process on a layer (SHIFT + Alt + Click) on a area
* ROI: Shortcut "Shift + left click" now also selects hollow black areas inside a white perimeter
* ROI: Shortcut "ESC + Shift" to clear only the ROI and leave masks in
* Fix a crash when using the pixel picker tool outside image bounds
* **Pixel editor:**
* Change drawings brush diameter limit from 255 to 4000 maximum
* When using layers below go lower than layer 0 it no longer apply the modifications
* **File formats:**
* Add an internal GCodeBuilder to generate identical gcode within formats with auto convertion, managing features and parsing information
* Internally rearrange formats properties and pass values to the base class
* Fix "Save As" filename when using formats with dual extensions
* CBDDLP and CTB: "LightPWM" was setting "BottomLightPWM" instead
* CWS: Fix problem with filenames with dots (.) and ending with numbers (#171)
* CWS: Improved the enconding and decoding performance
* CWS: Implement all available print paramenters and per layer, missing values are got from gcode interpretation
* CWS: Use set "light off delay" layer value instead of calculating it
* CWS: Get light off delay per layer parsed from gcode
* CWS - RGB flavour (Bene4 Mono): Warn about wrong resolution if width not multiples of 3 (#171)
* ZCode: Allow to set Bottom and Light intensity (LightPWM) on paramters and per layer
* ZCode: Allow to change bottom light pwm independent from normal light pwm
* LGS: Light off and bottom light off was setting the value on the wrong units
* UVJ: Unable to set per layer parameters
* **Issues:**
* When computing islands and resin traps together, they will not compute in parallel anymore to prevent CPU and tasks exaustion, it will calculate islands first and then resin traps, this should also speed up the process on weaker machines
* Gather resin trap areas together when computing for other issues to spare a decoding cycle latter
* When using a threshold for islands detection it was also appling it to the overhangs
* Fix the spare decoding conditional cycle for partial scans
* Change resin trap search from parallel to sync to prevent fake detections and missing joints at cost of speed (#13)
* **Tools:**
* Add layer selector: 'From first to current layer' and 'From current to last layer'
* I printed this file: Multiplier - Number of time(s) the file has been printed. Half numbers can be used to consume from a failed print. Example: 0.5x if a print canceled at 50% progress
* Pixel dimming: Increase wall thickness default from 5px to 10px
* Import layers: Importing layers was not marking layers as modified, then the save file won't save the new images in, to prevent other similar bugs, all layers that got replaced will be auto marked as modified
* (Add) Setting: Auto repair layers and issues on file load
* (Improvement) When ComputeIssuesOnLoad is enabled and issues are detected it will switch the view to the Issues tab
* **(Improvement) Raft Relief:**
* Add parameter "Mask layer index": Defines the mask layer to use and ignore the white blobs on the raft
* Increase the automatic support detection allowance on more odd shapes
* Prevent layer 0 to be used as a mask, if so it will quit
* If the ignored layer number are set and equal or larger than mask layer index it will quit
* Fix progress count when using ignored layers
* Change supports dilate kernel from Elipse to Rectangle for a better coverage of the pad
* Change the default values for a more conservative values
* (Fix) When both ComputeIssuesOnLoad and ComputeIssuesOnClickTab are enabled, clicking the issues tab will rescan for issues
* (Fix) Tools: Set a default profile insn't working
* (Fix) Redoing the last operation was not recovering the custom ROI on the operation
* (Add) File format: Zcode (Uniz IBEE)
* (Add) PrusaSlicer Printer: Uniz IBEE
* (Add) Extract: Output an "Layer.ini" file containing per layer data and include the Configuration.ini for Zip file formats
* (Improvement) Zip: Increase the GCode parsing performance
* (Fix) File formats: Wasn't set bottom / light off delay per individual layer on generic formats, defaulting every layer to 0
* (Fix) Edit print paramenters: When changing bottom layer count, layers didnt update thier properties
* (Add) Help - Material manager (F10): Allow to manage material stock and costs with statistic over time
* (Add) File - I printed this file (CTRL + P): Allow to select a material and consume resin from stock and print time from the loaded file
* **(Fix) PhotonWorkshop files: (#149)**
* CurrencySymbol to show the correct symbol and don't convert unknown values to prevent hacking
* Set PerLayerOverride to 1 only if any layer contains modified parameters that are not shared with the globals
* **(Fix) Clipboard:**
* Initing the clipboard for the first time was calling Undo and reseting parameters from layers with base settings
* Undo and redo make layer parameters to reset and recalculate position z, making invalid files when using with advanced tools
* (Fix) Tool - Edit print parameters: When editing per a layer range and reopen the tool it will show the previous set values
* **(Improvement) Calibration - Elephant Foot:** (#145)
* Remove text from bottom layers to prevent islands from not adhering to plate
* Add a option to extrude text up to a height
* **(Improvement) Calibration - Exposure time finder:** (#144)
* Increase the left and right margin to 10mm
* Allow to iterate over pixel brightness and generate dimmed objects to test multiple times at once
* **(Fix) File format PWS:**
* Some files would produce black layers if pixels are not full whites, Antialiasing level was not inherit from source
* Antialiasing level was forced 1 and not read the value from file properties
* Antialiasing threshold pixel math was producing the wrong pixel value
* **(Fix) Raw images (jpg, png, etc):** (#146)
* Set layer height to be 0.01mm by default to allow the use of some tools
* When add layers by clone or other tool it don't update layers height, positions, indexes, leading to crashes
* **(Fix) Actions - Import Layers:** (#146, #147)
* ROI calculation error leading to not process images that can potential fit inside the volumes
* Out-of-bounds calculation for Stack type
* Replace type was calculating out-of-bounds calculation like Stack type when is not required to and can lead to skip images
* Better image ROI colection for Insert and Replace types instead of capture the center most
* (Fix) Settings window: Force a redraw on open to fix auto sizes
* **(Fix) Exposure time finder:**
* Use a spiral square instead of configurable shapes to match the exact precise set pixels
* Set pixels as default values
* Optimized the pixel values to always produce a closed shape
* Rename cylinder to hole
* Crash when diameters are empty
* Profiles was not saving
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* (Add) PrusaSlicer printers:
* Peopoly Phenom XXL
* QIDI 3D ibox mono
* Wanhao CGR Mini Mono
* Wanhao CGR Mono
* (Add) PrusaSlicer light supports profiles
* (Add) Calibration - Elephant Foot: Mirror output
* (Add) Calibration - XYZ Accuracy: Mirror output
* (Add) Calibration - Tolerance: Mirror output
* (Add) Calibration - Grayscale: Mirror output
* (Add) Scripts on github
* (Change) Save 'Display Width' and 'Height' to calibration profiles and load them back only if file format aware from these properties
* (Fix) Tool - Morph: Set a rectangular 3x3 kernel by default
* (Fix) Tool - Blur: Set a rectangular 3x3 kernel by default
* (Fix) Calibration - Elephant Foot: Include part scale on profile text
* (Fix) MSI dont store instalation path (#121)
* (Add) RAM usage on title bar
* (Add) Clipboard manager: Undo (Ctrl + Z) and Redo (Ctrl + Y) modifications (Memory optimized)
* (Add) Current layer properties on information tab
* (Fix) Long windows with system zoom bigger than 100% were being hidden and overflow (#90)
* (Fix) Do not recompute issues nor properties nor reshow layer if operation is cancelled or failed
* (Add) Auto-updater: When a new version is detected UVtools still show the same green button at top,
on click, it will prompt for auto or manual update.
On Linux and Mac the script will kill all UVtools instances and auto-upgrade.
On Windows the user must close all instances and continue with the shown MSI installation
* (Add) Tool profiles: Create and remove named presets for some tools
* (Add) Event handler for handling non-UI thread exceptions
* (Fix) Mac: File - Open in a new window was not working
* (Fix) Tool - Rotate: Allow negative angles
* (Fix) Tool - Rotate: The operation was inverting the angle
* (Fix) Tools: Select normal layers can crash the program with small files with low layer count, eg: 3 layers total
* (Add) Support for PHZ zip files when renamed to .zip
* (Fix) ZIP: Allow to cancel on gather layers stage
* (Fix) ZIP: Thumbnails not showing nor saving
Tiago Conceição