maker/UVtools
1
0
Fork 0
mirror of https://github.com/riegera2412/UVtools.git synced 2026-07-08 17:42:31 +02:00
Code Issues Packages Projects Releases Wiki Activity
1,186 Commits 1 Branch 0 Tags
master
Commit Graph

14 Commits

Author SHA1 Message Date
Tiago Conceição 2c7ad09dc0 v3.13.1 
- (Change) `Layer.IsBottomLayer` no longer calculate the value using the position of the layer, a new property `IsBottomLayerByHeight` is now used to get that result
- (Improvement) Tool - Double exposure: Increase the bottom layer count per cloned bottom layer
- (Improvement) Calibration - Exposure time finder: Set the absolute bottom layer count accordingly when also testing for bottom time
- (Improvement) Goo: Enforce Wait times or Light-off-delay flag based on property set
- (Fix) AnyCubic and Goo: `PerLayerSetting` flag was set inverted causing printer not to follow layer settings when it should and also the otherwise (#689)
- (Fix) Tool - Scripting: Prevent from reload UI multiple times when using profiles (#694)
 2023-04-27 22:58:05 +01:00
Tiago Conceição a626cfdc72 v3.12.0 
- (Add) Allow to pause and resume operations (#654)
- (Add) `Layer.FirstTransitionLayer`
- (Add) `Layer.LastTransitionLayer`
- (Add) File format: Elegoo GOO
- (Add) PrusaSlicer Printer: Elegoo Mars 4
- (Improvement) Allocate maximum GPU memory for Skia up to 256 MB
- (Improvement) Set and sanitize transition layers exposure time from last bottom layer and first normal layer instead of global times (#659)
- (Change) CXDLP: Default version from 2 to 3
- (Fix) UI was not rendering with GPU (ANGLE)
- (Fix) `Layer.IsTransitionLayer` was returning the wrong value
- (Upgrade) .NET from 6.0.13 to 6.0.14
 2023-02-27 03:22:40 +00:00
Tiago Conceição ea4f7e0400 v3.11.0 
- **UI:**
  - (Improvement) Layer navigation load time by parallel `Mat` to `Bitmap` conversion
  - (Improvement) Allow to show exceptions without the stack trace and detailed trigger action by using the `MessageExceiption` (#644)
  - (Improvement) Allow progress to have and display a detailed log (#644)
  - (Improvement) Convert format to another with multiple versions will now only show the possible versions for the extension
- **Suggestion - Wait time before cure:**
  - (Improvement) Set the first wait time based on first valid layer mass rather than use the fixed limit
  - (Improvement) Set zero time to empty and dummy layers
  - (Improvement) When creating the dummy layer also increment the bottom layer count as the created layer count as one
- **PCB Exposure:**
  - (Add) Excellon Drill Format (drl) to cut off holes (Implementation may lack some advanced features, please confirm the result) (#646)
  - (Fix) Arc (G03) with negative offsets (I-/J-) was not drawing the shape correctly
  - (Fix) Implement the rotation for the outline primitive (#645)
- **File formats:**
  - (Improvement) Formats now sanitize the selected version before encode given the file extension, if version is out of range it will force the last known version
  - (Fix) CBDDLP: Remove a table from the file that might cause layer corruption
- (Add) Operations - `AfterCompleteReport` property: Gets or sets an report to show to the user after complete the operation with success
- (Improvement) Suggestion - Wait time after cure: Set zero time to empty and dummy layers
- (Improvement) Slight improvement on the contour intersection check, yields better performance on resin and suction cup detection
- (Improvement) Allow to trigger message boxes from operations and scripts (#644)
- (Upgrade) .NET from 6.0.12 to 6.0.13
 2023-01-16 02:03:51 +00:00
Tiago Conceição 8e4995a6a5 v3.8.3 
- **UVtoolsCmd:**
  - **print-properties:**
    - (Change) `-b`, `--base` option to `-a`, `-all` to indicate all properties and sub-properties, now defaults to only show base properties
    - (Add) `-r`, `--range` option to prints only the matching layer(s) index(es) in a range
    - (Add) `-i`, `--indexes` option to prints only the matching layer(s) index(es)
  - (Add) Command: `set-properties <input-file> <property=value> Set properties in a file or to it layers with new values`
  - (Add) Command: `print-issues <input-file> Detect and print issues in a file`
  - (Add) New option to the `run` command: `-p, --property <property=value>  Set a property with a new value (Compatible with operations only)`
  - (Remove) Command: `print-layers` as it has been moved to `print-properties`, use `-r :` to obtain same result as default on `print-layers`
- **Issues:**
  - (Fix) Issues groups with only one issue was displaying the wrong area value
  - (Fix) Volume incorrectly calculated, resulting in a high value for group of issues
  - (Fix) Incorrect calculation of the bounding rectangle for a group of issues
- **Repair layers:**
  - (Add) Switch to opt between "Re-detect the selected issues before repair" and "Use and repair the previous detected issues" (Default)
  - (Improvement) Do not allow to run the tool if there are no detected issues when the option "Use and repair the previous detected issues" is selected
- (Improvement) Linux: Recompile libcvextern.so on a older system to be able to run on both older and newest system (#603)
- (Upgrade) .NET from 6.0.10 to 6.0.11
 2022-11-10 04:09:00 +00:00
Tiago Conceição ca6f623a9f v3.6.7 
- **Layer:**
   - (Add) Property: `LayerMatBoundingRectangle`
   - (Add) Property: `LayerMatModelBoundingRectangle`
   - (Add) Method: `GetLayerMat(roi)`
- **Issues:**
   - **Islands:**
      - (Improvement) Islands detection performance
      - (Improvement) Required area to consider an island is now real area instead of bounding box area
      - (Fix) Logic bug when combining with overhangs
   - **Overhangs:**
      - (Improvement) Overhangs detection performance
      - (Improvement) Overhangs are now split and identified as separately in the layer
      - (Improvement) Overhangs now shows the correct issue area and able to locate the problem region more precisely
      - (Improvement) Compress overhangs into contours instead of using whole pixels, resulting in better render performance and less memory to hold the issue
      - (Fix) Bug in overhang logic causing to detect the problem twice when combined with supports
   - (Improvement) Touching bounds check logic to spare cycles
- **Tool - Raise platform on print finish:**
   - (Add) Preset "Minimum": Sets to the minimum position
   - (Add) Preset "Medium": Sets to half-way between minimum and maximum position
   - (Add) Preset "Maximum": Sets to the maximum position
   - (Add) Wait time: Sets the ensured wait time to stay still on the desired position.
           This is useful if the printer firmware always move to top and you want to stay still on the set position for at least the desired time.
           Note: The print time calculation will take this wait into consideration and display a longer print time.
- (Add) FileFormat: AnyCubic custom machine (.pwc)
- (Downgrade) OpenCV from 4.5.5 to 4.5.4 due a possible crash while detecting islands (Windows)
 2022-10-02 00:44:39 +01:00
Tiago Conceição 15c500ecaf v3.5.0 
- **PCB Exposure:**
   - (Add) Able to select multiple files and create a layer per file or merge them into one layer
   - (Add) Able to import files from a zip file
   - (Improvement) Round pixel coordinates and line thickness
   - (Improvement) Better position precision for primitives
   - (Improvement) Disable the ok button if no files were selected
   - (Change) Do not auto mirror based on printer lcd mirror type
   - (Fix) Limit line thickness to 1px minimum
   - (Fix) Allow leading zero omit from XY coordinates (#492)
   - (Fix) Mirror option was shifting the board position
- (Add) Calibrate - Blooming effect: Generates test models with various strategies and increments to measure the blooming effect
- (Add) Setting: Issues - Default order by, changes the default order on the issues list (#482)
- (Improvement) CTBv4 and encrypted: Fetch `BottomWaitTimes` virtual property from first bottom layer that has at least 2 pixels (#483)
- (Fix) Linux: Enable desktop integration for AppImages (#490)
- (Fix) Extracting zip contents inside folders would cause a error and not extract those contents
- (Upgrade) AvaloniaUI from 0.10.14 to 0.10.15 [Fixes auto-size problems]
 2022-06-19 04:19:23 +01:00
Tiago Conceição 57b8a9dc84 v3.2.0 
- **Core:**
   - (Add) Machine presets and able to load machine collection from PrusaSlicer
   - (Improvement) Core: Reference EmguCV runtimes into core instead of the UI project
- **File formats:**
   - **CXDLP:**
      - (Add) Detection support for Halot One Pro
      - (Add) Detection support for Halot One Plus
      - (Add) Detection support for Halot Sky Plus
      - (Add) Detection support for Halot Lite
      - (Improvement) Better handling and detection of printer model when converting
      - (Improvement) Discovered more fields meanings on format
      - (Fix) Exposure time in format is `round(time * 10, 1)`
      - (Fix) Speeds in format are in mm/s, was using mm/min before
   - (Add) JXS format for Uniformation GKone [Zip+GCode]
   - (Improvement) Saving and converting files now handle the file backup on Core instead on the UI, which prevents scripts and other projects lose the original file in case of error while saving
   - (Fix) After load files they was flagged as requiring a full encode, preventing fast save a fresh file
- **UVtoolsCmd:**
   - Bring back the commandline project
   - Consult README to see the available commands and syntax
   - Old terminal commands on UVtools still works for now, but consider switch to UVtoolsCmd or redirect the command using `UVtools --cmd "commands"`
- **Tools:**
   - **Change print resolution:**
      - (Add) Allow to change the display size to match the new printer
      - (Add) Machine presets to help set both resolution and display size to a correct printer and auto set fix pixel ratio
      - (Improvement) Real pixel pitch fixer due new display size information, this allow full transfers between different printers "without" invalidating the model size
      - (Improvement) Better arrangement of  the layout
   - (Add) Infill: Option "Reinforce infill if possible", it was always on before, now default is off and configurable
   - (Improvement) Always allow to export settings from tools
- **GCode:**
   - (Improvement) After print the last layer, do one lift with the same layer settings before attempt a fast move to top
   - (Improvement) Use the highest defined speed to send the build plate to top after finish print
   - (Improvement) Append a wait sync command in the end of gcode if needed
   - (Fix) When lift without a retract it still output the motor sync delay for the retract time and the wait time after retract
- **PrusaSlicer:**
   - (Add) Printer: Creality Halot One Pro CL-70
   - (Add) Printer: Creality Halot One Plus CL-79
   - (Add) Printer: Creality Halot Sky Plus CL-92
   - (Add) Printer: Creality Halot Lite CL-89L
   - (Add) Printer: Creality Halot Lite CL-89L
   - (Add) Printer: Creality CT133 Pro
   - (Add) Printer: Creality CT-005 Pro
   - (Add) Printer: Uniformation GKone
   - (Add) Printer: FlashForge Foto 8.9S
   - (Add) Printer: Elegoo Mars 2
   - (Improvement) Rename all Creality printers
   - (Fix) Creality model in print notes
 2022-03-26 03:38:39 +00:00
Tiago Conceição 22897ea389 v3.1.0 
- **Benchmark:**
   - (Add) PNG, GZip, Deflate and LZ4 compress tests
   - (Change) Test against a known image instead of random noise
   - (Change) Single-thread tests from 100 to 200 and multi-thread tests from 1000 to 5000
   - (Improvement) Same image instance is shared between tests instead of create new per test
   - (Fix) Encode typo
- **Core:**
   - (Add) Layer compression method: Allow to choose the compression method for layer image
      - **PNG:** Compression=High Speed=Slow (Use with low RAM)
      - **GZip:** Compression=Medium Speed=Medium (Optimal)
      - **Deflate:** Compression=Medium Speed=Medium (Optimal)
      - **LZ4:** Compression=Low Speed=Fast (Use with high RAM)
   - (Improvement) Better handling on cancel operations and more immediate response
   - (Fix) Extract: Zip Slip Vulnerability (CWE-22)
- **File formats:**
   - (Improvement) Better handling of encode/decoding layers from zip files
   - (Fix) ZCode: Canceling the file load can trigger an error
   - (Fix) VDA: Unable to open vda zip files
- **Tools:**
   - (Improvement) Allow operations to be aware of ROI and Masks before execution (#436)
   - (Improvement) Scripting: Allow save and load profiles (#436)
   - (Fix) Adjust layer height: When using the Offset type the last layer in the range was not taken in account (#435)
- **UI:**
   - (Improvement) Allow layer zoom levels of 0.1x and 64x but constrain minimum zoom to the level of image fit
   - (Improvement) Update change log now shows with markdown style and more readable
   - (Fix) Windows MSI upgrade to this version (#432)
   - (Fix) Auto-updater for Mac ARM, was downloading x64 instead
 2022-03-17 23:50:47 +00:00
Tiago Conceição 4600e81b08 v3.0.0 
- **(Add) Suggestions:**
   - A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
   - **Avaliable suggestions:**
      - **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
      - **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
                                   This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
      - **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
      - **Layer height:** Using the right layer height is important to get successful prints:
                          Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
                          Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
                          Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
   - Convert the project to Nullable aware and "null-safe"
- **File Formats:**
   - (Add) `Volume` property to get the total model volume
   - (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
   - (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
   If using scripts please update them, search for `.LayerManager.` and replace by `.`
   - (Change) Chitubox encrypted format can now be saved as normal
   - (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
   - (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
   - (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
   - (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
   - (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
   - (Improvement) Convert scripts to use Nullable code
- **UI:**
   - (Add) Fluent Dark theme
   - (Add) Default Light theme
   - (Add) Default Dark theme
   - (Change) Use fontawesome and material design to render the icons instead of static png images
   - (Change) Some icons
   - (Change) Move log tab to clipboard tab
   - (Change) Tooltip overlay default color
   - (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
   - (Fix) Center image icon for layer action button
   - (Fix) Center image icon for save layer image button
- **Tools:**
   - (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
   - (Improvement) Rotate: Unable to use an angle of 0
   - (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
   - (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
   - (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
   - (Add) More default namespaces
   - (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
   - (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
   - This brings big performance improvements, better JIT, faster I/O operations and others
   - Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
   - Due this macOS requirement starts at 10.15 (Catalina)
   - Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
 2022-03-12 21:04:47 +00:00
Tiago Conceição 554794d0d8 v2.28.0 
- **Core:**
   - (Add) Utilities methods (`MinimumSpeed`, `MaximumSpeed`, `CreateMat`, `CreateMatWithDummyPixel`, `FileFormat.CopyParameters`)
   - (Improvement) Issues - Print Height: Group all layers outside the valid print height
- **FileFormats:**
   - (Add) Generic / Phrozen ZIP format
   - (Add) Information/modifier to file formats to tell whatever is possible to use custom PositionZ per layer
   - (Add) Safe checks in order to run some tools, related to the previous "PositionZ" point
   - (Improvement) if blank, allow the previous layer to have a higher Z position than the successor layer
   - (Improvement) SL1: Implement the missing keys from new features of PrusaSlicer 2.4.0
   - (Fix) Calling a partial save action without a progress instance would cause a crash
   - (Fix) GCode: Unable to parse the "Wait time after lift" when a second lift (TSMC) was present, leading to a sum on "Wait time before cure"
- **Tools:**
   - (Add) Timelapse: Raise the build platform to a set position every odd-even height to be able to take a photo and create a time-lapse video of the print
   - (Add) Scripting: ScriptToggleSwitchInput
   - **Raise on print finish:**
      - (Add) Reapply check and prevent run the tool in that case
      - (Fix) It was incorrectly marked to be able to run in partial mode
      - (Fix) The dummy pixel was beeing set to a wrong location
- **Layers:**:
   - (Change) When set Wait times to a negative value, it will set the global wait time value accordingly
   - (Change) Allow ExposureTime to be 0
- **Commandline arguments**
   - (Add) --run-operation \<input_file\> \<operation_file.uvtop\>
   - (Add) --run-script \<input_file\> \<script_file.cs\>
   - (Add) --copy-parameters \<from_file\> \<to_file\>
- **UI:**
   - (Add) When open a file with missing crucial information, prompt the user to fill in that information (Optional)
   - (Add) Warn user about misfunction when open a file with invalid layer height of 0mm
   - (Improvement) Layer information: Only show the "Exposure time" when its availiable on the file format
   - (Improvement) When a file is about to get auto-converted once loaded and the output file already exists, prompt user for overwrite action
- (Improvement) Set default culture info at top most of the program to avoid strange problems with commandline arguments
- (Upgrade) .NET from 5.0.13 to 5.0.14
- (Downgrade) OpenCV from 4.5.5 to 4.5.4 due the crash while detecting islands (Linux and MacOS) (#411, #415, #416)
 2022-02-13 02:15:34 +00:00
Tiago Conceição 957729525d v2.27.0 
- **Tool - Morph:**
   - (Add) Operator: White tophat - Removes small isolated pixels and only return its affected pixels (Image - Noise removal)
   - (Add) Operator: Black tophat - Closes small holes inside the objects and only return its affected pixels (Gap closing - Image)
   - (Add) Operator: Hit or miss - Finds pixels in a given kernel pattern
   - (Remove) Operator: 'Isolate features' as that is the same as the 'White tophat' and is already inbuilt into OpenCV
- **Kernels:**
   - (Add) Option: Use dynamic kernel to enhancement the quality of the borders (#367)
   - (Add) Kernels are now saved with the operation profile
- **PrusaSlicer:**
   - (Add) Support to slice files to be converted for encrypted CTB format
   - (Add) Printer: Elegoo Mars 3 (#370)
   - (Add) Printer: EPAX E10 5K
   - (Add) Printer: EPAX X10 5K
   - (Add) Printer: Phrozen Sonic Mini 8K
   - (Add) Printer: Phrozen Sonic Mega 8K
   - (Fix) Printer: AnyCubic Photon Mono 4K - display size (#369)
   - (Fix) Printer: AnyCubic Photon Mono X 6K - display size (#369)
- (Add) Tool - Double exposure: Kernel configuration
- (Add) Tool - Pixel arithmetic: Kernel configuration
- (Add) Calibration - Elephant foot: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Fix) Calibrate - Elephant foot: Redo (Ctrl + Z) the operation was crashing the application
- (Fix) CTB, PHZ, FDG: Converting files with a null machine name would cause a exception
- (Fix) Anycubic files: Bottom lift and speed were showing default values instead of real used value
 2021-12-18 01:06:06 +00:00
Tiago Conceição 1e787ba11b Nuke issue system 
- Issues:
   - (Add) Suction cups: Add a auto repair feature for this issues by drill a vertical vent hole (#296)
   - (Add) Layer issue track bar: Colorize the issue tracker map with it own colors (Configurable)
   - (Add) Allow to group issues by type and/or layer
   - (Improvement) Order issues by area in descending order
   - (Improvement) Always bring the selected issue into view on the list
   - (Fix) When manually removing a issue from the list, it will no longer reselect other and make the user lost track of the remove issue
   - (Fix) Allow to ignore all issue type
- (Fix) Material ml calculation was calculating a bad value for PhotonWorkshop files
 2021-09-19 02:03:04 +01:00
Tiago Conceição 08a5797f36 v2.21.1 
- **(Add) Layer outline:**
   - Blob outline: Outline all separate blobs
   - Centroids: Draw a dot at the gemoetric center of a blob
- (Add) Adjust layer height: Allow to change exposure time on the dialog and inform that different layer thickness require different exposure times
- (Add) Resin trap detection: Allow to choose the starting layer index for resin trap detection which will also be considered a drain layer.
        Use this setting to bypass complicated rafts by selected the model first real layer (#221)
- (Improvement) Disable mirroed preview when loading a file that is not mirroed
 2021-09-06 01:34:58 +01:00
Tiago Conceição 6a2a52ebcb v2.21.0 
- **UI:**
   - **Menu:**
      - (Add) File - Open recent: Open any recent open file from a list
          Shift + Click: Open file in a new window
          Shift + Ctrl + Click: Remove file from recent list
          Ctrl + Click: Purge non-existing files
      - (Add) File - Send to: Copy the file directly to a removable drive (Windows only)
   - **(Add) Layer navigation buttons:**
      - SB: Navigate to the smallest bottom layer in mass
      - LB: Navigate to the largest bottom layer in mass
      - SN: Navigate to the smallest normal layer in mass
      - LN: Navigate to the largest normal layer in mass
   - (Add) Layer outline - Distance detection: Calculates the distance to the closest zero pixel for each pixel
- **Tools:**
   - **Dynamic Lifts:**
      - (Improvement) Select normal layers by default
      - (Improvement) Hide light-off delay fields when the file format don't support them
      - (Fix) Light-off delay fields was not hidding when set a mode that dont require the extra time fields
   - **Exposure time finder:**
      - (Fix) Fix the 'light-off delay' field not being show on files that support wait time before cure
      - (Change) Field name 'Light-off delay' to 'Wait time before cure'
   - (Add) Fade exposure time: The double exposure method clones the selected layer range and print the same layer twice with different exposure times and strategies
   - (Add) Double exposure: The double exposure method clones the selected layer range and print the same layer twice with different exposure times and strategies
   - (Add) Clone layers: Option to keep the same z position for the cloned layers instead of rebuild model height
   - (Improvement) The layer range selector for normal and bottom layers now selects the correct range based on IsBottom property rather than layer index
   - (Fix) The layer range selector was setting a very high last layer index when bottom layer count is 0
   - (Fix) Pixel arithmetic: Threshold types "Otsu" and "Triangle" are flags to combine with other types, it will auto append the "Binnary" type
- (Add) Support for Encrypted CTB (read-only)
 2021-09-03 22:21:41 +01:00