maker/UVtools
1
0
Fork 0
mirror of https://github.com/riegera2412/UVtools.git synced 2026-07-12 11:32:33 +02:00
Code Issues Packages Projects Releases Wiki Activity
1,186 Commits 1 Branch 0 Tags
master
Commit Graph

10 Commits

Author SHA1 Message Date
Tiago Conceição a626cfdc72 v3.12.0 
- (Add) Allow to pause and resume operations (#654)
- (Add) `Layer.FirstTransitionLayer`
- (Add) `Layer.LastTransitionLayer`
- (Add) File format: Elegoo GOO
- (Add) PrusaSlicer Printer: Elegoo Mars 4
- (Improvement) Allocate maximum GPU memory for Skia up to 256 MB
- (Improvement) Set and sanitize transition layers exposure time from last bottom layer and first normal layer instead of global times (#659)
- (Change) CXDLP: Default version from 2 to 3
- (Fix) UI was not rendering with GPU (ANGLE)
- (Fix) `Layer.IsTransitionLayer` was returning the wrong value
- (Upgrade) .NET from 6.0.13 to 6.0.14
 2023-02-27 03:22:40 +00:00
Tiago Conceição 8e4995a6a5 v3.8.3 
- **UVtoolsCmd:**
  - **print-properties:**
    - (Change) `-b`, `--base` option to `-a`, `-all` to indicate all properties and sub-properties, now defaults to only show base properties
    - (Add) `-r`, `--range` option to prints only the matching layer(s) index(es) in a range
    - (Add) `-i`, `--indexes` option to prints only the matching layer(s) index(es)
  - (Add) Command: `set-properties <input-file> <property=value> Set properties in a file or to it layers with new values`
  - (Add) Command: `print-issues <input-file> Detect and print issues in a file`
  - (Add) New option to the `run` command: `-p, --property <property=value>  Set a property with a new value (Compatible with operations only)`
  - (Remove) Command: `print-layers` as it has been moved to `print-properties`, use `-r :` to obtain same result as default on `print-layers`
- **Issues:**
  - (Fix) Issues groups with only one issue was displaying the wrong area value
  - (Fix) Volume incorrectly calculated, resulting in a high value for group of issues
  - (Fix) Incorrect calculation of the bounding rectangle for a group of issues
- **Repair layers:**
  - (Add) Switch to opt between "Re-detect the selected issues before repair" and "Use and repair the previous detected issues" (Default)
  - (Improvement) Do not allow to run the tool if there are no detected issues when the option "Use and repair the previous detected issues" is selected
- (Improvement) Linux: Recompile libcvextern.so on a older system to be able to run on both older and newest system (#603)
- (Upgrade) .NET from 6.0.10 to 6.0.11
 2022-11-10 04:09:00 +00:00
Tiago Conceição 9f7722d369 v3.7.0 
- **File formats:**
   - (Add) `TransitionLayerCount` modifier to: Chitubox Zip, CWS, JXS, OSLA, PW*, UVJ, ZCodex, ZCode
   - (Add) Utility methods for transition layers calculation/parse
   - (Improvement) Calculate and set `TransitionLayerCount` property in file decode based on layer exposure time configuration
- **GCode:**
   - (Improvement) GCode: Able to parse layer image file with appended numbers on the filename (Afecting CWS) (#577)
   - (Fix) Bad parsing of the file when it comes from Lychee or NovaMaker slicer (Afecting CWS)
   - (Fix) Incorrect parse of "Wait time before cure" from layers when printer require wait sync moves (Afecting CWS)
- **Tools:**
   - (Add) External tests: The Complete Resin 3D Printing Settings Guide for Beginners
   - (Add) External tests: 9 settings for faster printing
   - (Improvement) Fade exposure time: Set `TransitionLayerCount` property with the affected layer count
- **Suggestions:**
   - (Add) Transition layers: If you are printing flat on the build plate your model will print better when using a smooth transition exposure time instead of a harsh variation, resulting in reduced layer line effect and avoid possible problems due the large exposure difference.
                              This is not so important when your model print raised under a raft/supports unaffected by the bottom exposure, in that case, it's fine to ignore this.
   - (Add) Model position: Printing on a corner will reduce the FEP stretch forces when detaching from the model during a lift sequence, benefits are: Reduced lift height and faster printing, less stretch, less FEP marks, better FEP lifespan, easier to peel, less prone to failure and use the screen pixels more evenly.
                           If the model is too large to fit within the margin(s) on the screen, it will attempt to center it on that same axis to avoid touching on screen edge(s) and to give a sane margin from it.
- **Status bar:**
   - (Add) Transition layers: 0/-0.00s
   - (Improvement) Change "Layer Height: 0.000mm" to "Layers: count @ 0.000mm"
   - (Improvement) Change "Bottom layers: 0" to "Bottom layers: 0/0.000mm"
- (Change) Show user informative message about CTB Encrypted file format once per ten file loads
- (Upgrade) .NET from 6.0.9 to 6.0.10
- (Fix) Windows MSI installation not upgrading well when downgrade libraries
 2022-10-12 01:16:34 +01:00
Tiago Conceição 15c500ecaf v3.5.0 
- **PCB Exposure:**
   - (Add) Able to select multiple files and create a layer per file or merge them into one layer
   - (Add) Able to import files from a zip file
   - (Improvement) Round pixel coordinates and line thickness
   - (Improvement) Better position precision for primitives
   - (Improvement) Disable the ok button if no files were selected
   - (Change) Do not auto mirror based on printer lcd mirror type
   - (Fix) Limit line thickness to 1px minimum
   - (Fix) Allow leading zero omit from XY coordinates (#492)
   - (Fix) Mirror option was shifting the board position
- (Add) Calibrate - Blooming effect: Generates test models with various strategies and increments to measure the blooming effect
- (Add) Setting: Issues - Default order by, changes the default order on the issues list (#482)
- (Improvement) CTBv4 and encrypted: Fetch `BottomWaitTimes` virtual property from first bottom layer that has at least 2 pixels (#483)
- (Fix) Linux: Enable desktop integration for AppImages (#490)
- (Fix) Extracting zip contents inside folders would cause a error and not extract those contents
- (Upgrade) AvaloniaUI from 0.10.14 to 0.10.15 [Fixes auto-size problems]
 2022-06-19 04:19:23 +01:00
Tiago Conceição 57b8a9dc84 v3.2.0 
- **Core:**
   - (Add) Machine presets and able to load machine collection from PrusaSlicer
   - (Improvement) Core: Reference EmguCV runtimes into core instead of the UI project
- **File formats:**
   - **CXDLP:**
      - (Add) Detection support for Halot One Pro
      - (Add) Detection support for Halot One Plus
      - (Add) Detection support for Halot Sky Plus
      - (Add) Detection support for Halot Lite
      - (Improvement) Better handling and detection of printer model when converting
      - (Improvement) Discovered more fields meanings on format
      - (Fix) Exposure time in format is `round(time * 10, 1)`
      - (Fix) Speeds in format are in mm/s, was using mm/min before
   - (Add) JXS format for Uniformation GKone [Zip+GCode]
   - (Improvement) Saving and converting files now handle the file backup on Core instead on the UI, which prevents scripts and other projects lose the original file in case of error while saving
   - (Fix) After load files they was flagged as requiring a full encode, preventing fast save a fresh file
- **UVtoolsCmd:**
   - Bring back the commandline project
   - Consult README to see the available commands and syntax
   - Old terminal commands on UVtools still works for now, but consider switch to UVtoolsCmd or redirect the command using `UVtools --cmd "commands"`
- **Tools:**
   - **Change print resolution:**
      - (Add) Allow to change the display size to match the new printer
      - (Add) Machine presets to help set both resolution and display size to a correct printer and auto set fix pixel ratio
      - (Improvement) Real pixel pitch fixer due new display size information, this allow full transfers between different printers "without" invalidating the model size
      - (Improvement) Better arrangement of  the layout
   - (Add) Infill: Option "Reinforce infill if possible", it was always on before, now default is off and configurable
   - (Improvement) Always allow to export settings from tools
- **GCode:**
   - (Improvement) After print the last layer, do one lift with the same layer settings before attempt a fast move to top
   - (Improvement) Use the highest defined speed to send the build plate to top after finish print
   - (Improvement) Append a wait sync command in the end of gcode if needed
   - (Fix) When lift without a retract it still output the motor sync delay for the retract time and the wait time after retract
- **PrusaSlicer:**
   - (Add) Printer: Creality Halot One Pro CL-70
   - (Add) Printer: Creality Halot One Plus CL-79
   - (Add) Printer: Creality Halot Sky Plus CL-92
   - (Add) Printer: Creality Halot Lite CL-89L
   - (Add) Printer: Creality Halot Lite CL-89L
   - (Add) Printer: Creality CT133 Pro
   - (Add) Printer: Creality CT-005 Pro
   - (Add) Printer: Uniformation GKone
   - (Add) Printer: FlashForge Foto 8.9S
   - (Add) Printer: Elegoo Mars 2
   - (Improvement) Rename all Creality printers
   - (Fix) Creality model in print notes
 2022-03-26 03:38:39 +00:00
Tiago Conceição 22897ea389 v3.1.0 
- **Benchmark:**
   - (Add) PNG, GZip, Deflate and LZ4 compress tests
   - (Change) Test against a known image instead of random noise
   - (Change) Single-thread tests from 100 to 200 and multi-thread tests from 1000 to 5000
   - (Improvement) Same image instance is shared between tests instead of create new per test
   - (Fix) Encode typo
- **Core:**
   - (Add) Layer compression method: Allow to choose the compression method for layer image
      - **PNG:** Compression=High Speed=Slow (Use with low RAM)
      - **GZip:** Compression=Medium Speed=Medium (Optimal)
      - **Deflate:** Compression=Medium Speed=Medium (Optimal)
      - **LZ4:** Compression=Low Speed=Fast (Use with high RAM)
   - (Improvement) Better handling on cancel operations and more immediate response
   - (Fix) Extract: Zip Slip Vulnerability (CWE-22)
- **File formats:**
   - (Improvement) Better handling of encode/decoding layers from zip files
   - (Fix) ZCode: Canceling the file load can trigger an error
   - (Fix) VDA: Unable to open vda zip files
- **Tools:**
   - (Improvement) Allow operations to be aware of ROI and Masks before execution (#436)
   - (Improvement) Scripting: Allow save and load profiles (#436)
   - (Fix) Adjust layer height: When using the Offset type the last layer in the range was not taken in account (#435)
- **UI:**
   - (Improvement) Allow layer zoom levels of 0.1x and 64x but constrain minimum zoom to the level of image fit
   - (Improvement) Update change log now shows with markdown style and more readable
   - (Fix) Windows MSI upgrade to this version (#432)
   - (Fix) Auto-updater for Mac ARM, was downloading x64 instead
 2022-03-17 23:50:47 +00:00
Tiago Conceição 4600e81b08 v3.0.0 
- **(Add) Suggestions:**
   - A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
   - **Avaliable suggestions:**
      - **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
      - **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
                                   This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
      - **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
      - **Layer height:** Using the right layer height is important to get successful prints:
                          Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
                          Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
                          Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
   - Convert the project to Nullable aware and "null-safe"
- **File Formats:**
   - (Add) `Volume` property to get the total model volume
   - (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
   - (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
   If using scripts please update them, search for `.LayerManager.` and replace by `.`
   - (Change) Chitubox encrypted format can now be saved as normal
   - (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
   - (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
   - (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
   - (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
   - (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
   - (Improvement) Convert scripts to use Nullable code
- **UI:**
   - (Add) Fluent Dark theme
   - (Add) Default Light theme
   - (Add) Default Dark theme
   - (Change) Use fontawesome and material design to render the icons instead of static png images
   - (Change) Some icons
   - (Change) Move log tab to clipboard tab
   - (Change) Tooltip overlay default color
   - (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
   - (Fix) Center image icon for layer action button
   - (Fix) Center image icon for save layer image button
- **Tools:**
   - (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
   - (Improvement) Rotate: Unable to use an angle of 0
   - (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
   - (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
   - (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
   - (Add) More default namespaces
   - (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
   - (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
   - This brings big performance improvements, better JIT, faster I/O operations and others
   - Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
   - Due this macOS requirement starts at 10.15 (Catalina)
   - Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
 2022-03-12 21:04:47 +00:00
Tiago Conceição 069c521d72 v2.29.0 
- **File formats:**
   - (Add) Transition layer count to the supported files and auto compute transition time on corresponding layers in software mode
   - (Add) `HaveTransitionLayers`, `TransitionLayersType`, `BottomLayers`, `NormalLayers`, `TransitionLayers`, `TsmcLayers` properties
   - (Add) Layer: `IsTransitionLayer` property
   - (Add) SL1: Keyword `TransitionLayerCount_xxx` - Sets the number of transition layers
   - (Improvement) CTB, PHZ, FDG: Implement the `ModifiedTimestampMinutes` field, it was the MysteriousId before as an unknown field
   - (Fix) CWS: Open in partial mode will cause an exception and prevent file from load
- **CCode:**
   - (Add) Allow inverse lifts to work as an retract
   - (Fix) Parsing of WaitTimeAfterLift was incorrect when lacking a lift sequence
   - (Fix) Layers lacking an exposure time was defaulting to global time, now defaults to 0
   - (Fix) Layers without a LED ON (M106) was setting `LightPWM` to the max value (255), now defaults to 0
- **Tools:**
   - **Timelapse:**
      - (Add) Information: Raise Layer count equivalence
      - (Add) Information: Additional lifts to be generated
      - (Add) Option: Ensure the last layer - If enabled, it will generate an obligatory layer to cover the last layer
      - (Improvement) Optimize lift for virtual layer mode, allowing set a slow and fast lift / retract by using another virtual layyer to emulate a lift
      - (Improvement) Allow to define slow and fast speed for virtual layer mode even if TSMC isn't supported
   - (Add) Fade exposure time: Setting 'Disable firmware transition layers' - Attempt to disable firmware strict transition layers in favor of this tool
   - (Add) Calibration tests: Attempt to auto disable the firmware transifiton layers
   - (Change) Edit print parameters: Allow set `BottomLiftHeight` and `LiftHeight` to 0mm
- **UI:**
   - (Improvement) Disallow drop files into UI when is processing data / disabled and prevent crashing from that action
   - (Improvement) Information tab visibility and MinHeight for data grids
   - (Improvement) Hide/show GCode tab when necessary (dependent on file format)
   - (Improvement) The 'save as' will show the new file into 'Open recent' files
- **PrusaSlicer printers:**
   - (Add) Elegoo Jupiter
   - (Add) EPAX X1 4KS
   - (Add) EPAX DX1 Pro
   - (Add) EPAX DX10 Pro 5K
   - (Add) EPAX DX10 Pro 8K
   - (Add) EPAX E10 8K
   - (Add) EPAX X133 6K
 2022-02-21 05:15:55 +00:00
Tiago Conceição c968eaedf9 v2.25.0 
- **File formats:**
   - (Add) Allow to partial open the files for read and/or change properties, the layer images won't be read nor cached (Fast)
   - (Add) More abstraction on partial save
- **Scripting:**
   - (Add) ScriptOpenFolderDialogInput - Selects a folder path
   - (Add) ScriptOpenFileDialogInput - Selectes a file to open
   - (Add) ScriptSaveFileDialogInput - Selects a file to save
- (Add) [UNSAVED] tag to the title bar when there are unsaved changes on the current session
- (Improvement) Better handling of empty images on the UI
 2021-11-18 03:29:08 +00:00
Tiago Conceição 6a2a52ebcb v2.21.0 
- **UI:**
   - **Menu:**
      - (Add) File - Open recent: Open any recent open file from a list
          Shift + Click: Open file in a new window
          Shift + Ctrl + Click: Remove file from recent list
          Ctrl + Click: Purge non-existing files
      - (Add) File - Send to: Copy the file directly to a removable drive (Windows only)
   - **(Add) Layer navigation buttons:**
      - SB: Navigate to the smallest bottom layer in mass
      - LB: Navigate to the largest bottom layer in mass
      - SN: Navigate to the smallest normal layer in mass
      - LN: Navigate to the largest normal layer in mass
   - (Add) Layer outline - Distance detection: Calculates the distance to the closest zero pixel for each pixel
- **Tools:**
   - **Dynamic Lifts:**
      - (Improvement) Select normal layers by default
      - (Improvement) Hide light-off delay fields when the file format don't support them
      - (Fix) Light-off delay fields was not hidding when set a mode that dont require the extra time fields
   - **Exposure time finder:**
      - (Fix) Fix the 'light-off delay' field not being show on files that support wait time before cure
      - (Change) Field name 'Light-off delay' to 'Wait time before cure'
   - (Add) Fade exposure time: The double exposure method clones the selected layer range and print the same layer twice with different exposure times and strategies
   - (Add) Double exposure: The double exposure method clones the selected layer range and print the same layer twice with different exposure times and strategies
   - (Add) Clone layers: Option to keep the same z position for the cloned layers instead of rebuild model height
   - (Improvement) The layer range selector for normal and bottom layers now selects the correct range based on IsBottom property rather than layer index
   - (Fix) The layer range selector was setting a very high last layer index when bottom layer count is 0
   - (Fix) Pixel arithmetic: Threshold types "Otsu" and "Triangle" are flags to combine with other types, it will auto append the "Binnary" type
- (Add) Support for Encrypted CTB (read-only)
 2021-09-03 22:21:41 +01:00