- (Add) Allow to pause and resume operations (#654)
- (Add) `Layer.FirstTransitionLayer`
- (Add) `Layer.LastTransitionLayer`
- (Add) File format: Elegoo GOO
- (Add) PrusaSlicer Printer: Elegoo Mars 4
- (Improvement) Allocate maximum GPU memory for Skia up to 256 MB
- (Improvement) Set and sanitize transition layers exposure time from last bottom layer and first normal layer instead of global times (#659)
- (Change) CXDLP: Default version from 2 to 3
- (Fix) UI was not rendering with GPU (ANGLE)
- (Fix) `Layer.IsTransitionLayer` was returning the wrong value
- (Upgrade) .NET from 6.0.13 to 6.0.14
- **UI:**
- (Improvement) Layer navigation load time by parallel `Mat` to `Bitmap` conversion
- (Improvement) Allow to show exceptions without the stack trace and detailed trigger action by using the `MessageExceiption` (#644)
- (Improvement) Allow progress to have and display a detailed log (#644)
- (Improvement) Convert format to another with multiple versions will now only show the possible versions for the extension
- **Suggestion - Wait time before cure:**
- (Improvement) Set the first wait time based on first valid layer mass rather than use the fixed limit
- (Improvement) Set zero time to empty and dummy layers
- (Improvement) When creating the dummy layer also increment the bottom layer count as the created layer count as one
- **PCB Exposure:**
- (Add) Excellon Drill Format (drl) to cut off holes (Implementation may lack some advanced features, please confirm the result) (#646)
- (Fix) Arc (G03) with negative offsets (I-/J-) was not drawing the shape correctly
- (Fix) Implement the rotation for the outline primitive (#645)
- **File formats:**
- (Improvement) Formats now sanitize the selected version before encode given the file extension, if version is out of range it will force the last known version
- (Fix) CBDDLP: Remove a table from the file that might cause layer corruption
- (Add) Operations - `AfterCompleteReport` property: Gets or sets an report to show to the user after complete the operation with success
- (Improvement) Suggestion - Wait time after cure: Set zero time to empty and dummy layers
- (Improvement) Slight improvement on the contour intersection check, yields better performance on resin and suction cup detection
- (Improvement) Allow to trigger message boxes from operations and scripts (#644)
- (Upgrade) .NET from 6.0.12 to 6.0.13
- **UVtoolsCmd:**
- **print-properties:**
- (Change) `-b`, `--base` option to `-a`, `-all` to indicate all properties and sub-properties, now defaults to only show base properties
- (Add) `-r`, `--range` option to prints only the matching layer(s) index(es) in a range
- (Add) `-i`, `--indexes` option to prints only the matching layer(s) index(es)
- (Add) Command: `set-properties <input-file> <property=value> Set properties in a file or to it layers with new values`
- (Add) Command: `print-issues <input-file> Detect and print issues in a file`
- (Add) New option to the `run` command: `-p, --property <property=value> Set a property with a new value (Compatible with operations only)`
- (Remove) Command: `print-layers` as it has been moved to `print-properties`, use `-r :` to obtain same result as default on `print-layers`
- **Issues:**
- (Fix) Issues groups with only one issue was displaying the wrong area value
- (Fix) Volume incorrectly calculated, resulting in a high value for group of issues
- (Fix) Incorrect calculation of the bounding rectangle for a group of issues
- **Repair layers:**
- (Add) Switch to opt between "Re-detect the selected issues before repair" and "Use and repair the previous detected issues" (Default)
- (Improvement) Do not allow to run the tool if there are no detected issues when the option "Use and repair the previous detected issues" is selected
- (Improvement) Linux: Recompile libcvextern.so on a older system to be able to run on both older and newest system (#603)
- (Upgrade) .NET from 6.0.10 to 6.0.11
- **Tools:**
- **PCB Exposure:**
- (Add) Allow to scale the drawing sizes per gerber file
- (Add) Allow to invert the drawing polarity per gerber file (#592)
- (Add) Allow to drag and drop files into "Add files" button and grid header
- (Improvement) Do not add empty layers when usable to draw or when draw a all black image
- (Improvement) "Merge all gerbers into one layer" will now draw all gerber into one image instead of perform the Max(of all gerbers pixels), allowing to subtract areas as they are on gerbers
- **Import layers:** Fix error when trying to insert layers
- **Export layers images:** Better compression of contours for SVG export, resulting in smooth curves, better visuals and lower file size
- (Add) Outline: Triangulate
- (Remove) Avalonia.Diagnostics dependency in release mode
- **Tools:**
- (Add) PCB exposure: Converts a gerber file to a pixel perfect image given your printer LCD/resolution to exposure the copper traces.
- (Improvement) Export settings now indent the XML to be more user friendly to edit
- (Improvement) Layer import: Allow to have profiles
- (Improvement) Layer import: Validates if selected files exists before execute
- (Fix) Lithophane: Disallow having start threshold equal to end threshold
- (Add) Windows explorer: Right-click on files will show "Open with UVtools" on context menu which opens the selected file on UVtools (Windows MSI only)
- (Improvement) Island and overhang detection: Ignore detection on all layers that are in direct contact with the plate (On same first layer position)
- (Improvement) Cmd: Better error messages for convert command when using shared extensions and no extension
- **Core:**
- (Add) Machine presets and able to load machine collection from PrusaSlicer
- (Improvement) Core: Reference EmguCV runtimes into core instead of the UI project
- **File formats:**
- **CXDLP:**
- (Add) Detection support for Halot One Pro
- (Add) Detection support for Halot One Plus
- (Add) Detection support for Halot Sky Plus
- (Add) Detection support for Halot Lite
- (Improvement) Better handling and detection of printer model when converting
- (Improvement) Discovered more fields meanings on format
- (Fix) Exposure time in format is `round(time * 10, 1)`
- (Fix) Speeds in format are in mm/s, was using mm/min before
- (Add) JXS format for Uniformation GKone [Zip+GCode]
- (Improvement) Saving and converting files now handle the file backup on Core instead on the UI, which prevents scripts and other projects lose the original file in case of error while saving
- (Fix) After load files they was flagged as requiring a full encode, preventing fast save a fresh file
- **UVtoolsCmd:**
- Bring back the commandline project
- Consult README to see the available commands and syntax
- Old terminal commands on UVtools still works for now, but consider switch to UVtoolsCmd or redirect the command using `UVtools --cmd "commands"`
- **Tools:**
- **Change print resolution:**
- (Add) Allow to change the display size to match the new printer
- (Add) Machine presets to help set both resolution and display size to a correct printer and auto set fix pixel ratio
- (Improvement) Real pixel pitch fixer due new display size information, this allow full transfers between different printers "without" invalidating the model size
- (Improvement) Better arrangement of the layout
- (Add) Infill: Option "Reinforce infill if possible", it was always on before, now default is off and configurable
- (Improvement) Always allow to export settings from tools
- **GCode:**
- (Improvement) After print the last layer, do one lift with the same layer settings before attempt a fast move to top
- (Improvement) Use the highest defined speed to send the build plate to top after finish print
- (Improvement) Append a wait sync command in the end of gcode if needed
- (Fix) When lift without a retract it still output the motor sync delay for the retract time and the wait time after retract
- **PrusaSlicer:**
- (Add) Printer: Creality Halot One Pro CL-70
- (Add) Printer: Creality Halot One Plus CL-79
- (Add) Printer: Creality Halot Sky Plus CL-92
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality CT133 Pro
- (Add) Printer: Creality CT-005 Pro
- (Add) Printer: Uniformation GKone
- (Add) Printer: FlashForge Foto 8.9S
- (Add) Printer: Elegoo Mars 2
- (Improvement) Rename all Creality printers
- (Fix) Creality model in print notes
- **Benchmark:**
- (Add) PNG, GZip, Deflate and LZ4 compress tests
- (Change) Test against a known image instead of random noise
- (Change) Single-thread tests from 100 to 200 and multi-thread tests from 1000 to 5000
- (Improvement) Same image instance is shared between tests instead of create new per test
- (Fix) Encode typo
- **Core:**
- (Add) Layer compression method: Allow to choose the compression method for layer image
- **PNG:** Compression=High Speed=Slow (Use with low RAM)
- **GZip:** Compression=Medium Speed=Medium (Optimal)
- **Deflate:** Compression=Medium Speed=Medium (Optimal)
- **LZ4:** Compression=Low Speed=Fast (Use with high RAM)
- (Improvement) Better handling on cancel operations and more immediate response
- (Fix) Extract: Zip Slip Vulnerability (CWE-22)
- **File formats:**
- (Improvement) Better handling of encode/decoding layers from zip files
- (Fix) ZCode: Canceling the file load can trigger an error
- (Fix) VDA: Unable to open vda zip files
- **Tools:**
- (Improvement) Allow operations to be aware of ROI and Masks before execution (#436)
- (Improvement) Scripting: Allow save and load profiles (#436)
- (Fix) Adjust layer height: When using the Offset type the last layer in the range was not taken in account (#435)
- **UI:**
- (Improvement) Allow layer zoom levels of 0.1x and 64x but constrain minimum zoom to the level of image fit
- (Improvement) Update change log now shows with markdown style and more readable
- (Fix) Windows MSI upgrade to this version (#432)
- (Fix) Auto-updater for Mac ARM, was downloading x64 instead
- **(Add) Suggestions:**
- A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
- **Avaliable suggestions:**
- **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
- **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
- **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
- **Layer height:** Using the right layer height is important to get successful prints:
Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
- Convert the project to Nullable aware and "null-safe"
- **File Formats:**
- (Add) `Volume` property to get the total model volume
- (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
- (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
If using scripts please update them, search for `.LayerManager.` and replace by `.`
- (Change) Chitubox encrypted format can now be saved as normal
- (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
- (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
- (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
- (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
- (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
- (Improvement) Convert scripts to use Nullable code
- **UI:**
- (Add) Fluent Dark theme
- (Add) Default Light theme
- (Add) Default Dark theme
- (Change) Use fontawesome and material design to render the icons instead of static png images
- (Change) Some icons
- (Change) Move log tab to clipboard tab
- (Change) Tooltip overlay default color
- (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
- (Fix) Center image icon for layer action button
- (Fix) Center image icon for save layer image button
- **Tools:**
- (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
- (Improvement) Rotate: Unable to use an angle of 0
- (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
- (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
- (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
- (Add) More default namespaces
- (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
- (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
- This brings big performance improvements, better JIT, faster I/O operations and others
- Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
- Due this macOS requirement starts at 10.15 (Catalina)
- Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
- **Change resolution:**
- (Add) Presets: 5K UHD, 6K and 8K UHD
- (Add) Resulting pixel ratio information
- (Add) Fix the pixel ratio by resize the layers images with the proposed ratio to match the new resolution
- (Fix) New images could have noise when processed on linux and macos
- (Add) Layer slider debounce time to render the image [Configurable] (#343)
- (Fix) CTB v1: Incorrect getter for the LightOffDelay
- (Fix) Reallocating layers were not notifying nor updating the layer collection about the changes, leading to wrong layer count
- (Fix) Undo and redo now also reverts the file resolution when changed
- Issues:
- (Add) Suction cups: Add a auto repair feature for this issues by drill a vertical vent hole (#296)
- (Add) Layer issue track bar: Colorize the issue tracker map with it own colors (Configurable)
- (Add) Allow to group issues by type and/or layer
- (Improvement) Order issues by area in descending order
- (Improvement) Always bring the selected issue into view on the list
- (Fix) When manually removing a issue from the list, it will no longer reselect other and make the user lost track of the remove issue
- (Fix) Allow to ignore all issue type
- (Fix) Material ml calculation was calculating a bad value for PhotonWorkshop files
- (Add) Setting - Max degree of parallelism: Sets the maximum number of concurrent tasks/threads/operations enabled to run by parallel method calls.
If your computer lags and freeze during operations you can reduce this number to reduce the workload and keep some cores available to other tasks as well.
<= 0: Will utilize however many threads the underlying scheduler provides, mostly this is the processor count.
1: Single thread. (#279)
- (Fix) ZCode: lcd.gcode was blank / not generating when converting from any file format
- (Fix) Zcodex: Change MaterialId from `uint` to `string` (#223, #224)
- (Fix) CXDLP: Set the default printer name to `CL-89` when creating new instance, was `null` before
- (Fix) Some tools were unable to pull certain settings from profiles and imported settings:
- Elephant foot
- Exposure finder
- Grayscale
- Stress tower
- Tolerance
- XYZ Accuracy
- Change resolution
- Dynamic lifts
- (Change) `Layer repair` icon at Issues tab and `Outline` icon on preview toolbar (#227)
- (Developers) Created `UVtools.AvaloniaControls` project with `AdvancedImageBox` control for AvaloniaUI
- (Add) Layer action - Export layers to heat map: Export a layer range to a grayscale heat map image that represents the median of the mass in the Z depth/perception. The pixel brightness/intensity shows where the most mass are concentrated.
- (Upgrade) AvaloniaUI from 0.10 to 0.10.2
- (Remove) Unused assemblies
- **Issues**
- Improve the performance when loading big lists of issues into the DataGrid
- Auto refresh issues on the vertical highlight tracker once cath a modification on the Issues list
- **Layer preview - Difference:**
- Layer difference will now only check the pixels inside the union of previous, current and next layer bounding rectangle, increasing the performance and speed
- Previous and next layer pixels if both exists was not showing with the configured color and using the next layer color instead
- Respect Anti-Aliasing pixels and fade colors accordingly
- Unlock the possiblity of using the layer difference on first and last layer
- Add a option to show similar pixels instead of the difference
- Change previous default color from (255, 0, 255) to (81, 131, 82) for better depth preception
- Change next default color from (0, 255, 255) to (81, 249, 252) for better depth preception
- Change previous & next default color from (255, 0, 0) to (246, 240, 216) for better depth preception
- **(Fix) Pixel editor:**
- Modification was append instead of prepend on the list
- Modification was not updating the index number on the list
- (Fix) PrusaSlicer printer: Bene4 Mono screen, bed and height size
* **File formats:**
* PhotonS: Implement the write/encode method to allow to use this format and fix the thumbnail
* VDT: Allow to auto convert the .vdt to the target printer format using the Machine - Notes, using a flag: FILEFORMAT_YourPrinterExtension, for example: FILEFORMAT_CTB
* (Fix) Unable to convert files with no thumbnails to other file format that requires thumbnails
* **Tools:**
* (Add) Re-height: Option to Anti-Aliasing layers
* (Fix) Morph and Blur: The combobox was not setting to the selected item when preform a redo operation (Ctrl+Shift+Z)
* **GUI:**
* (Change) Progress window to be a grid element inside MainWindow, this allow to reuse the graphics and its elements without the need of spawning a Window instance everytime a progress is shown, resulting in better performance and more fluid transaction
* (Improvement) Clear issues when generating calibration tests
* **Operations:**
* Force validate all operations on execute if they haven't been before, if validation fails it will show the message error
* Add some utility functions to ease layer and mat allocation in the file
* Layer remove: Disallow to select and remove all layers
* Tool - Edit print parameters: Retract speed wasn't propagating the value to normal layers
* File formats: Better control, set and checking for null/empty thumbnails
* Clipboard Manager: As now full backups are made when removing or adding layers, the undo and redo no longer rebuilds layer properties nor Z heights
* Resin traps: Improved the detection to group areas with cross paths and process them as one whole area, this also increase the detection speed and performance (#179, #13 )
* Action - Layer import: Fix a bug preventing to import layers of any kind
* **Core:**
* Fix some improper locks for progress counter and change to Interlocked instead
* Fix a bug when chaging layer count by remove or add layers it will malform the file after save and crash the program with some tools and/or clipboard
* Fix when a operation fails by other reason different from cancelation it was not restoring the backup
* When manually delete/fix issues it will also backup the layers
* **LayerManager:**
* LayerManager is now readonly and no longer used to transpose layers, each FileFormat have now a unique `LayerManager` instance which is set on the generic constructor
* Implemented `List<Layer>` methods to easy modify the layers array
* Changing the `Layers` instance will now recompute some properties, call the properties rebuild and forced sanitize of the structure
* Better reallocation methods
* **Clipboard Manager:**
* Add the hability to do full backups, they will be marked with an asterisk (*) at clipboard items list
* When a partial backup is made and it backups all the layers it will be converted to full backup
* Clipboard can now restore a snapshot directly with `RestoreSnapshot`
* Prevent restore the initial backup upon file load and when clearing the clipboard
* Clip's that change the layer count will perform a full backup and also do a fail-safe backup behind if previous clip is not a full backup
* **Pixel dimming:**
* Allow to load an image file as a pattern (Do not use very large files or it will take much time to dump the data into the textbox)
* Empty lines on patterns will be discarded and not trigger validation error
* **File formats:**
* Add a layer height check on file load to prevent load files with more decimal digits than supported to avoid precision errors and bugs
* Fix a wrong cast causing seconds to miliseconds convertion to be caped to the wrong value
* Internally if a layer colection was replaced, all new layers will be marked as modified to avoid forgeting and ease the code
* **Tools:**
* Pixel dimming: Better render quality, it now respects AA better and produce better walls (#172)
* Elephant foot: It now respects AA better and produce better walls for wall dimming
* Layer Import: Cancelling the operation while importing layers was permanent supresseing layer properties update when changing a base property
* (Change) PrusaSlicer print profiles: Improved raft height and bottom layer count for better print success, less delamination, shorter time and reduce wear of FEP
* (Scripts): Add operation "Validate" pattern to docs and examples (#172)
* **(Improvement) Calibration - Elephant Foot:** (#145)
* Remove text from bottom layers to prevent islands from not adhering to plate
* Add a option to extrude text up to a height
* **(Improvement) Calibration - Exposure time finder:** (#144)
* Increase the left and right margin to 10mm
* Allow to iterate over pixel brightness and generate dimmed objects to test multiple times at once
* **(Fix) File format PWS:**
* Some files would produce black layers if pixels are not full whites, Antialiasing level was not inherit from source
* Antialiasing level was forced 1 and not read the value from file properties
* Antialiasing threshold pixel math was producing the wrong pixel value
* **(Fix) Raw images (jpg, png, etc):** (#146)
* Set layer height to be 0.01mm by default to allow the use of some tools
* When add layers by clone or other tool it don't update layers height, positions, indexes, leading to crashes
* **(Fix) Actions - Import Layers:** (#146, #147)
* ROI calculation error leading to not process images that can potential fit inside the volumes
* Out-of-bounds calculation for Stack type
* Replace type was calculating out-of-bounds calculation like Stack type when is not required to and can lead to skip images
* Better image ROI colection for Insert and Replace types instead of capture the center most
* (Fix) Settings window: Force a redraw on open to fix auto sizes
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* (Add) Settings - Automations: Change only light-off delay if value is zero (Enabled by default)
* (Fix) Calibrators: Some file formats will crash when calibration test output more layers than the dummy file
* (Fix) Undo/redo don't unlock the save function
* (Add) About box: Primary screen identifier and open on screen identifier
* (Add) Calibrator - External tests
* (Change) Rewrite 'Action - Import Layer(s)' to support file formats and add the followig importation types:
* **Insert:** Insert layers. (Requires images with bounds equal or less than file resolution)
* **Replace:** Replace layers. (Requires images with bounds equal or less than file resolution)
* **Stack:** Stack layers content. (Requires images with bounds equal or less than file resolution)
* **Merge:** Merge/Sum layers content. (Requires images with same resolution)
* **Subtract:** Subtract layers content. (Requires images with same resolution)
* **BitwiseAnd:** Perform a 'bitwise and' operation over layer pixels. (Requires images with same resolution)
* **BitwiseOr:** Perform a 'bitwise or' operation over layer pixels. (Requires images with same resolution)
* **BitwiseXOr:** Perform a 'bitwise xor' operation over layer pixels. (Requires images with same resolution)
* (Change) Icon for Tool - Raft Relief
* (Change) Windows and dialogs max size are now calculated to where window is opened instead of use the primary or first screen all the time
* (Add) RAM usage on title bar
* (Add) Clipboard manager: Undo (Ctrl + Z) and Redo (Ctrl + Y) modifications (Memory optimized)
* (Add) Current layer properties on information tab
* (Fix) Long windows with system zoom bigger than 100% were being hidden and overflow (#90)
* (Fix) Do not recompute issues nor properties nor reshow layer if operation is cancelled or failed
* (Add) Auto-updater: When a new version is detected UVtools still show the same green button at top,
on click, it will prompt for auto or manual update.
On Linux and Mac the script will kill all UVtools instances and auto-upgrade.
On Windows the user must close all instances and continue with the shown MSI installation
* (Add) Tool profiles: Create and remove named presets for some tools
* (Add) Event handler for handling non-UI thread exceptions
* (Fix) Mac: File - Open in a new window was not working
* (Fix) Tool - Rotate: Allow negative angles
* (Fix) Tool - Rotate: The operation was inverting the angle
* (Fix) Tools: Select normal layers can crash the program with small files with low layer count, eg: 3 layers total
Mostly text updates, with a few adjustments
to dialog box layouts or controls.
Presets for Threshold, for example, where changed
from buttons to a combobox selections.
Allowed the line splits added by Designer to remain, but
did fix any mid-word breaks.
Tiago Conceição
Finn Neuik
Bryce Yancey