- (Add) Allow to pause and resume operations (#654)
- (Add) `Layer.FirstTransitionLayer`
- (Add) `Layer.LastTransitionLayer`
- (Add) File format: Elegoo GOO
- (Add) PrusaSlicer Printer: Elegoo Mars 4
- (Improvement) Allocate maximum GPU memory for Skia up to 256 MB
- (Improvement) Set and sanitize transition layers exposure time from last bottom layer and first normal layer instead of global times (#659)
- (Change) CXDLP: Default version from 2 to 3
- (Fix) UI was not rendering with GPU (ANGLE)
- (Fix) `Layer.IsTransitionLayer` was returning the wrong value
- (Upgrade) .NET from 6.0.13 to 6.0.14
- **UI:**
- (Improvement) Layer navigation load time by parallel `Mat` to `Bitmap` conversion
- (Improvement) Allow to show exceptions without the stack trace and detailed trigger action by using the `MessageExceiption` (#644)
- (Improvement) Allow progress to have and display a detailed log (#644)
- (Improvement) Convert format to another with multiple versions will now only show the possible versions for the extension
- **Suggestion - Wait time before cure:**
- (Improvement) Set the first wait time based on first valid layer mass rather than use the fixed limit
- (Improvement) Set zero time to empty and dummy layers
- (Improvement) When creating the dummy layer also increment the bottom layer count as the created layer count as one
- **PCB Exposure:**
- (Add) Excellon Drill Format (drl) to cut off holes (Implementation may lack some advanced features, please confirm the result) (#646)
- (Fix) Arc (G03) with negative offsets (I-/J-) was not drawing the shape correctly
- (Fix) Implement the rotation for the outline primitive (#645)
- **File formats:**
- (Improvement) Formats now sanitize the selected version before encode given the file extension, if version is out of range it will force the last known version
- (Fix) CBDDLP: Remove a table from the file that might cause layer corruption
- (Add) Operations - `AfterCompleteReport` property: Gets or sets an report to show to the user after complete the operation with success
- (Improvement) Suggestion - Wait time after cure: Set zero time to empty and dummy layers
- (Improvement) Slight improvement on the contour intersection check, yields better performance on resin and suction cup detection
- (Improvement) Allow to trigger message boxes from operations and scripts (#644)
- (Upgrade) .NET from 6.0.12 to 6.0.13
- **UVtoolsCmd:**
- **print-properties:**
- (Change) `-b`, `--base` option to `-a`, `-all` to indicate all properties and sub-properties, now defaults to only show base properties
- (Add) `-r`, `--range` option to prints only the matching layer(s) index(es) in a range
- (Add) `-i`, `--indexes` option to prints only the matching layer(s) index(es)
- (Add) Command: `set-properties <input-file> <property=value> Set properties in a file or to it layers with new values`
- (Add) Command: `print-issues <input-file> Detect and print issues in a file`
- (Add) New option to the `run` command: `-p, --property <property=value> Set a property with a new value (Compatible with operations only)`
- (Remove) Command: `print-layers` as it has been moved to `print-properties`, use `-r :` to obtain same result as default on `print-layers`
- **Issues:**
- (Fix) Issues groups with only one issue was displaying the wrong area value
- (Fix) Volume incorrectly calculated, resulting in a high value for group of issues
- (Fix) Incorrect calculation of the bounding rectangle for a group of issues
- **Repair layers:**
- (Add) Switch to opt between "Re-detect the selected issues before repair" and "Use and repair the previous detected issues" (Default)
- (Improvement) Do not allow to run the tool if there are no detected issues when the option "Use and repair the previous detected issues" is selected
- (Improvement) Linux: Recompile libcvextern.so on a older system to be able to run on both older and newest system (#603)
- (Upgrade) .NET from 6.0.10 to 6.0.11
- **PCB Exposure:**
- (Add) Able to select multiple files and create a layer per file or merge them into one layer
- (Add) Able to import files from a zip file
- (Improvement) Round pixel coordinates and line thickness
- (Improvement) Better position precision for primitives
- (Improvement) Disable the ok button if no files were selected
- (Change) Do not auto mirror based on printer lcd mirror type
- (Fix) Limit line thickness to 1px minimum
- (Fix) Allow leading zero omit from XY coordinates (#492)
- (Fix) Mirror option was shifting the board position
- (Add) Calibrate - Blooming effect: Generates test models with various strategies and increments to measure the blooming effect
- (Add) Setting: Issues - Default order by, changes the default order on the issues list (#482)
- (Improvement) CTBv4 and encrypted: Fetch `BottomWaitTimes` virtual property from first bottom layer that has at least 2 pixels (#483)
- (Fix) Linux: Enable desktop integration for AppImages (#490)
- (Fix) Extracting zip contents inside folders would cause a error and not extract those contents
- (Upgrade) AvaloniaUI from 0.10.14 to 0.10.15 [Fixes auto-size problems]
- (Add) Information about the loaded file when copying from the about box
- (Improvement) Tools are now disabled on the menu if not supported by the file format once each file load (#476)
- (Fix) Tool - Edit tool parameters: Overlap label on "per layer override" mode (#478)
- (Fix) Corruption of `GZip` and `Deflate` layer compression methods
- **Core:**
- (Add) Machine presets and able to load machine collection from PrusaSlicer
- (Improvement) Core: Reference EmguCV runtimes into core instead of the UI project
- **File formats:**
- **CXDLP:**
- (Add) Detection support for Halot One Pro
- (Add) Detection support for Halot One Plus
- (Add) Detection support for Halot Sky Plus
- (Add) Detection support for Halot Lite
- (Improvement) Better handling and detection of printer model when converting
- (Improvement) Discovered more fields meanings on format
- (Fix) Exposure time in format is `round(time * 10, 1)`
- (Fix) Speeds in format are in mm/s, was using mm/min before
- (Add) JXS format for Uniformation GKone [Zip+GCode]
- (Improvement) Saving and converting files now handle the file backup on Core instead on the UI, which prevents scripts and other projects lose the original file in case of error while saving
- (Fix) After load files they was flagged as requiring a full encode, preventing fast save a fresh file
- **UVtoolsCmd:**
- Bring back the commandline project
- Consult README to see the available commands and syntax
- Old terminal commands on UVtools still works for now, but consider switch to UVtoolsCmd or redirect the command using `UVtools --cmd "commands"`
- **Tools:**
- **Change print resolution:**
- (Add) Allow to change the display size to match the new printer
- (Add) Machine presets to help set both resolution and display size to a correct printer and auto set fix pixel ratio
- (Improvement) Real pixel pitch fixer due new display size information, this allow full transfers between different printers "without" invalidating the model size
- (Improvement) Better arrangement of the layout
- (Add) Infill: Option "Reinforce infill if possible", it was always on before, now default is off and configurable
- (Improvement) Always allow to export settings from tools
- **GCode:**
- (Improvement) After print the last layer, do one lift with the same layer settings before attempt a fast move to top
- (Improvement) Use the highest defined speed to send the build plate to top after finish print
- (Improvement) Append a wait sync command in the end of gcode if needed
- (Fix) When lift without a retract it still output the motor sync delay for the retract time and the wait time after retract
- **PrusaSlicer:**
- (Add) Printer: Creality Halot One Pro CL-70
- (Add) Printer: Creality Halot One Plus CL-79
- (Add) Printer: Creality Halot Sky Plus CL-92
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality CT133 Pro
- (Add) Printer: Creality CT-005 Pro
- (Add) Printer: Uniformation GKone
- (Add) Printer: FlashForge Foto 8.9S
- (Add) Printer: Elegoo Mars 2
- (Improvement) Rename all Creality printers
- (Fix) Creality model in print notes
- **Benchmark:**
- (Add) PNG, GZip, Deflate and LZ4 compress tests
- (Change) Test against a known image instead of random noise
- (Change) Single-thread tests from 100 to 200 and multi-thread tests from 1000 to 5000
- (Improvement) Same image instance is shared between tests instead of create new per test
- (Fix) Encode typo
- **Core:**
- (Add) Layer compression method: Allow to choose the compression method for layer image
- **PNG:** Compression=High Speed=Slow (Use with low RAM)
- **GZip:** Compression=Medium Speed=Medium (Optimal)
- **Deflate:** Compression=Medium Speed=Medium (Optimal)
- **LZ4:** Compression=Low Speed=Fast (Use with high RAM)
- (Improvement) Better handling on cancel operations and more immediate response
- (Fix) Extract: Zip Slip Vulnerability (CWE-22)
- **File formats:**
- (Improvement) Better handling of encode/decoding layers from zip files
- (Fix) ZCode: Canceling the file load can trigger an error
- (Fix) VDA: Unable to open vda zip files
- **Tools:**
- (Improvement) Allow operations to be aware of ROI and Masks before execution (#436)
- (Improvement) Scripting: Allow save and load profiles (#436)
- (Fix) Adjust layer height: When using the Offset type the last layer in the range was not taken in account (#435)
- **UI:**
- (Improvement) Allow layer zoom levels of 0.1x and 64x but constrain minimum zoom to the level of image fit
- (Improvement) Update change log now shows with markdown style and more readable
- (Fix) Windows MSI upgrade to this version (#432)
- (Fix) Auto-updater for Mac ARM, was downloading x64 instead
- **(Add) Suggestions:**
- A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
- **Avaliable suggestions:**
- **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
- **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
- **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
- **Layer height:** Using the right layer height is important to get successful prints:
Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
- Convert the project to Nullable aware and "null-safe"
- **File Formats:**
- (Add) `Volume` property to get the total model volume
- (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
- (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
If using scripts please update them, search for `.LayerManager.` and replace by `.`
- (Change) Chitubox encrypted format can now be saved as normal
- (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
- (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
- (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
- (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
- (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
- (Improvement) Convert scripts to use Nullable code
- **UI:**
- (Add) Fluent Dark theme
- (Add) Default Light theme
- (Add) Default Dark theme
- (Change) Use fontawesome and material design to render the icons instead of static png images
- (Change) Some icons
- (Change) Move log tab to clipboard tab
- (Change) Tooltip overlay default color
- (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
- (Fix) Center image icon for layer action button
- (Fix) Center image icon for save layer image button
- **Tools:**
- (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
- (Improvement) Rotate: Unable to use an angle of 0
- (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
- (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
- (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
- (Add) More default namespaces
- (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
- (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
- This brings big performance improvements, better JIT, faster I/O operations and others
- Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
- Due this macOS requirement starts at 10.15 (Catalina)
- Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
- (Add) Setting - Max degree of parallelism: Sets the maximum number of concurrent tasks/threads/operations enabled to run by parallel method calls.
If your computer lags and freeze during operations you can reduce this number to reduce the workload and keep some cores available to other tasks as well.
<= 0: Will utilize however many threads the underlying scheduler provides, mostly this is the processor count.
1: Single thread. (#279)
- **(Add) PrusaSlicer printers:**
- Creality HALOT-MAX CL-133
- Nova3D Elfin2
- Nova3D Elfin2 Mono SE
- Nova3D Elfin3 Mini
- Nova3D Bene4
- Nova3D Bene5
- Nova3D Whale
- Nova3D Whale2
- **About box:**
- (Add) Runtime information
- (Fix) Limit panels width and height to not overgrow
- **(Fix) macOS:**
- macOS version auto-upgrade (Will only work on future releases and if running v2.16.0 or greater)
- Demo file not loading
- Auto disable windows scaling factor when on Monjave or greater on new instalations
- (Add) Tool: Raise platform on print finish
- (Add) CXDLP: Support for Halot MAX CL-133
- (Improvement) Tools: Better handling/validation of tools that are unable to run with abstraction
- (Improvement) CWS: Simplify filenames inside the archive
- (Upgrade) EmguCV from 4.5.2 to 4.5.3
- (Change) Allow to set layer `LightPWM` to 0
- (Fix) Arrange dropdown arrow from layer image save icon to be at center
- (Fix) ZCode: lcd.gcode was blank / not generating when converting from any file format
- (Fix) Zcodex: Change MaterialId from `uint` to `string` (#223, #224)
- (Fix) CXDLP: Set the default printer name to `CL-89` when creating new instance, was `null` before
- (Fix) Some tools were unable to pull certain settings from profiles and imported settings:
- Elephant foot
- Exposure finder
- Grayscale
- Stress tower
- Tolerance
- XYZ Accuracy
- Change resolution
- Dynamic lifts
- (Change) `Layer repair` icon at Issues tab and `Outline` icon on preview toolbar (#227)
- (Developers) Created `UVtools.AvaloniaControls` project with `AdvancedImageBox` control for AvaloniaUI
- **Shortcuts:**
- (Add) (Ctrl + Shift + R) to turn on and cycle the Rotate modes
- (Add) (Ctrl + Shift + F) to turn on and cycle the Flip modes
- (Add) (Ctrl + Shift + B) to select the build volume as ROI
- **GUI:**
- (Add) Allow to drag and drop '.uvtop' files into UVtools to sequential show and load operations from files
- (Change) Rotate icon on layer preview
- (Upgrade) AvaloniaUI from 0.10.3 to 0.10.4
- **Tools:**
- (Add) 'Reset to defaults' button on every dialog
- (Improvement) Window size and position handling
- (Improvement) Constrain profile box width to not stretch the window
- (Improvement) ROI section design
- **Dynamic lift:**
- (Add) View buttons to show the largest/smallest layers
- (Add) Light-off mode: Set the light-off with an extra delay
- (Add) Light-off mode: Set the light-off without an extra delay
- (Add) Light-off mode: Set the light-off to zero
- (Improvement) Disable bottom and/or normal layer fields when the selected range is outside
- (Add) Settings - Automations: Light-off delay set modes
- (Fix) Exposure time finder: Add staircase, bullseye and counter triangles to feature count at thumbnail
* **Operations:**
* Force validate all operations on execute if they haven't been before, if validation fails it will show the message error
* Add some utility functions to ease layer and mat allocation in the file
* Layer remove: Disallow to select and remove all layers
* Tool - Edit print parameters: Retract speed wasn't propagating the value to normal layers
* File formats: Better control, set and checking for null/empty thumbnails
* **Core:**
* Fix some improper locks for progress counter and change to Interlocked instead
* Fix a bug when chaging layer count by remove or add layers it will malform the file after save and crash the program with some tools and/or clipboard
* Fix when a operation fails by other reason different from cancelation it was not restoring the backup
* When manually delete/fix issues it will also backup the layers
* **LayerManager:**
* LayerManager is now readonly and no longer used to transpose layers, each FileFormat have now a unique `LayerManager` instance which is set on the generic constructor
* Implemented `List<Layer>` methods to easy modify the layers array
* Changing the `Layers` instance will now recompute some properties, call the properties rebuild and forced sanitize of the structure
* Better reallocation methods
* **Clipboard Manager:**
* Add the hability to do full backups, they will be marked with an asterisk (*) at clipboard items list
* When a partial backup is made and it backups all the layers it will be converted to full backup
* Clipboard can now restore a snapshot directly with `RestoreSnapshot`
* Prevent restore the initial backup upon file load and when clearing the clipboard
* Clip's that change the layer count will perform a full backup and also do a fail-safe backup behind if previous clip is not a full backup
* **Pixel dimming:**
* Allow to load an image file as a pattern (Do not use very large files or it will take much time to dump the data into the textbox)
* Empty lines on patterns will be discarded and not trigger validation error
* **Core:**
* Write "Unhandled Exceptions" to an "errors.log" file at user settings directory
* Increase layer height max precision from 2 to 3 decimals
* **Settings - Layer Preview:**
* Allow to set hollow line thickness to -1 to fill the area
* Add tooltip for "Auto rotate on load": Auto rotate the layer preview on file load for a landscape viewport
* Add option to masks outline color and thickness
* Add option to clear ROI when adding masks
* Add option "Auto flip on load": Auto flip the layer preview on file load if the file is marked to print mirrored on the printer LCD
* **Layer preview:**
* Add selectable rotation directions 90º (CW and CCW)
* Add preview flip (CTRL+F) horizontally and/or vertically
* Add maskable regions to process on a layer (SHIFT + Alt + Click) on a area
* ROI: Shortcut "Shift + left click" now also selects hollow black areas inside a white perimeter
* ROI: Shortcut "ESC + Shift" to clear only the ROI and leave masks in
* Fix a crash when using the pixel picker tool outside image bounds
* **Pixel editor:**
* Change drawings brush diameter limit from 255 to 4000 maximum
* When using layers below go lower than layer 0 it no longer apply the modifications
* **File formats:**
* Add an internal GCodeBuilder to generate identical gcode within formats with auto convertion, managing features and parsing information
* Internally rearrange formats properties and pass values to the base class
* Fix "Save As" filename when using formats with dual extensions
* CBDDLP and CTB: "LightPWM" was setting "BottomLightPWM" instead
* CWS: Fix problem with filenames with dots (.) and ending with numbers (#171)
* CWS: Improved the enconding and decoding performance
* CWS: Implement all available print paramenters and per layer, missing values are got from gcode interpretation
* CWS: Use set "light off delay" layer value instead of calculating it
* CWS: Get light off delay per layer parsed from gcode
* CWS - RGB flavour (Bene4 Mono): Warn about wrong resolution if width not multiples of 3 (#171)
* ZCode: Allow to set Bottom and Light intensity (LightPWM) on paramters and per layer
* ZCode: Allow to change bottom light pwm independent from normal light pwm
* LGS: Light off and bottom light off was setting the value on the wrong units
* UVJ: Unable to set per layer parameters
* **Issues:**
* When computing islands and resin traps together, they will not compute in parallel anymore to prevent CPU and tasks exaustion, it will calculate islands first and then resin traps, this should also speed up the process on weaker machines
* Gather resin trap areas together when computing for other issues to spare a decoding cycle latter
* When using a threshold for islands detection it was also appling it to the overhangs
* Fix the spare decoding conditional cycle for partial scans
* Change resin trap search from parallel to sync to prevent fake detections and missing joints at cost of speed (#13)
* **Tools:**
* Add layer selector: 'From first to current layer' and 'From current to last layer'
* I printed this file: Multiplier - Number of time(s) the file has been printed. Half numbers can be used to consume from a failed print. Example: 0.5x if a print canceled at 50% progress
* Pixel dimming: Increase wall thickness default from 5px to 10px
* Import layers: Importing layers was not marking layers as modified, then the save file won't save the new images in, to prevent other similar bugs, all layers that got replaced will be auto marked as modified
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* (Add) Tools: Warn where layer preview is critical for use the tool, must disable layer rotation first (#100)
* (Add) CWS: Bottom lift speed property
* (Add) CWS: Support Wanhao Workshop CWX and Wanhao Creation Workshop file types (#98)
* (Add) CWS: Split format into virtual extensions (.cws, .rgb.cws, .xml.cws) to support diferent file formats and diferent printers under same main .cws extensions. That will affect file converts only to let UVtools know what type of encoding to use. Load and save a xxx.cws file will always auto decode/encode the file for the correct target format no matter the extension.
* (Improvement) CWS: It no longer search for a specific filename in the zip file, instead it look for extension to get the files to ensure it always found them no matter the file name system
* (Fix) CWS: When "Save as" the file were generating sub files with .cws extension, eg: filename0001.cws.png
* (Change) Allow read empty layers without error from Anycubic files (PWS, PW0, PWxx) due a bug on slicer software under macOS
* (Add) RAM usage on title bar
* (Add) Clipboard manager: Undo (Ctrl + Z) and Redo (Ctrl + Y) modifications (Memory optimized)
* (Add) Current layer properties on information tab
* (Fix) Long windows with system zoom bigger than 100% were being hidden and overflow (#90)
* (Fix) Do not recompute issues nor properties nor reshow layer if operation is cancelled or failed
* (Add) Auto-updater: When a new version is detected UVtools still show the same green button at top,
on click, it will prompt for auto or manual update.
On Linux and Mac the script will kill all UVtools instances and auto-upgrade.
On Windows the user must close all instances and continue with the shown MSI installation
* (Add) Tool profiles: Create and remove named presets for some tools
* (Add) Event handler for handling non-UI thread exceptions
* (Fix) Mac: File - Open in a new window was not working
* (Fix) Tool - Rotate: Allow negative angles
* (Fix) Tool - Rotate: The operation was inverting the angle
* (Fix) Tools: Select normal layers can crash the program with small files with low layer count, eg: 3 layers total
* (Add) Tools can now run inside a ROI (#49)
* (Add) Layer preview: Hold-Shift + Left-drag to select an ROI (Region of interest) on image, that region will be used instead of whole image when running some tools
* (Add) Layer preview: Hold-Shift + Hold-Alt + Left-drag to select and auto adjust the ROI to the contained objects, that region will be used instead of whole image when running some tools
* (Add) Layer preview: Hold-Shift + Right-click on a object to select its bounding area, that region will be used instead of whole image when running some tools
* (Add) Layer preview: ESC key to clear ROI
* (Add) Layer preview: Overlay text with hints for current action
* (Add) Tool - Move: Now possible to do a copy move instead of a cut move
* (Add) Arrow wait cursor to progress loadings
* (Change) Layer preview: Hold-Shift key to select issues and pick pixel position/brightness changed to Hold-Control key
* (Change) Layer preview: Shift+click combination to zoom-in changed to Alt+click
* (Fix) CTB v3: Bad file when re-encoding
Mostly text updates, with a few adjustments
to dialog box layouts or controls.
Presets for Threshold, for example, where changed
from buttons to a combobox selections.
Allowed the line splits added by Designer to remain, but
did fix any mid-word breaks.
* (Add) PrusaSlicer Printer: Elegoo Mars 2 Pro
* (Add) PrusaSlicer Printer: Creality LD-002H
* (Add) PrusaSlicer Printer: Voxelab Polaris
* (Add) File Format: UVJ (#8)
* (Add) Mutataor: Pixel Dimming
* (Add) Pixel Editor tab with new drawing functions
* (Add) Pixel Editor: Bursh area and shape
* (Add) Pixel Editor: Supports
* (Add) Pixel Editor: Drain holes
* (Add) Settings for pixel editor
* (Add) Setting: File open default directory
* (Add) Setting: File save default directory
* (Add) Setting: File extract default directory
* (Add) Setting: File convert default directory
* (Add) Setting: File save prompt for overwrite (#10)
* (Add) Setting: File save preffix and suffix name
* (Add) Setting: UVtools version to the title bar
* (Improvement) Force same directory as input file on dialogs
* (Improvement) Pattern: Better positioning when not using an anchor, now it's more center friendly
* (Change) Setting: Start maximized defaults to true
* (Fix) Pattern: Calculated volume was appending one margin width/height more
* (Fix) When cancel a file load, some shortcuts can crash the program as it assume file is loaded
* (Fix) pws: Encode using the same count-of-threshold method as CBDDLP (ezrec/uv3dp#79)
* (Add) Allow chitubox, phz, pws, pw0 files convert to cws
* (Add) Allow convert between cbddlp, ctb and photon
* (Add) Allow convert between pws and pw0
* (Improvement) Layers can now have modified heights and independent parameters (#9)
* (Improvement) UVtools now generate better gcode and detect the lack of Lift and same z position and optimize the commands
* (Fix) zcodex: Wasn't reporting layer decoding progress
Tiago Conceição
Bryce Yancey