* (Change) Island detection system:
* **Before**: A island is consider safe by just have a static amount of pixels, this mean it's possible to have a mass with 100000px supported by only 10px (If safe pixels are configured to this value), so there's no relation with island size and it supporting size. This leads to a big problem and not detecting some potential/unsafe islands.
* **Now:** Instead of a static number of safe pixels, now there's a multiplier value, which will multiply the island total pixels per the multiplier, the supporting pixels count must be higher than the result of the multiplication.
* **Formula:** Supporting pixels >= Island pixels * multiplier
* **Example:** Multiplier of 0.25, an island with 1000px * 0.25 = 250px, so this island will not be considered if below exists at least 250px to support it, otherwise will be flagged as an island.
* **Notes:** This is a much more fair system but still not optimal, bridges and big planes with micro supports can trigger false islands. While this is a improvement over old system it's not perfect and you probably will have islands which you must ignore. Renember that you not have to clear out the issue list! Simply step over and ignore the issues you think are false-positives.
* (Add) Tool - Calculator: Convert millimeters to pixels
* (Add) Tool - Calculator: Find the optimal "Ligth-Off Delay"
* (Add) Internal abstraction of display size to all file formats
* (Add) Default demo file that loads on startup when no file is specified (this can be disable/enabled on settings)
* (Add) Issue: Overhangs - Detects potential overhangs on layers (#64)
* (Add) PrusaSlicer Printer: Phrozen Sonic Mini 4K
* (Improvement) CWS: Allow read files with "slice*" filenames as content (#67)
* (Improvement) Allow convert chitubox files to CWS Bene4 Mono printer, must configure a printer containing "Bene4 Mono" name on Chitubox (#67)
* (Improvement) Edit print parameters: Show changes on confirm dialog
* (Improvement) Edit print parameters: Dedicated reset button hides when value is unchanged
* (Improvement) More detailed descriptions on error messages
* (Fix) Some islands wont remove from list when many selected and click remove
* (Fix) Extract: Use trail zeros to layer filenames
* (Fix) MSI installer not creating shortcuts (#66)
*(Add)- Support for color cursors via CursorResourceLoader
The built-in Cursor class has a limitation that prevents it from
supporting color or greyscale cursors. Loading anything other than a 2-bit
cursor will result in an all-black cursor. Added a CursorResourceLoader
class to work around this issue.
*(Add) Utilized CursorResourceLoader to load a custom 'pencil' cursor for the
pixel edit mode.
*(Add) Option to the settings dialog to allow the preview layer
tooltips for select, ROI, and edit pixel mode to be hidden.
The same confirmation dialog in the pixel edit mode is used for both
applying operations, and exiting pixel edit mode.
As a result, the text promt feels a little out of context for the apply
case, and this also results in pixel history getting cleard if you
choose "No" on this dialog. This makes sense if you are exiging pixel
edit mode, but not if you just hit apply and changed your mind.
Added a seperate dialog for the Apply case that only has the options
"Yes/No". Yes applies the changes, No behaves like Cancel.
Also added a new setting in the settings dialog so that pixel editor
can be configured to exit after each apply operation. I found I was
applying operations and then going off and doing other things without
realizing I was still in pixel edit mode, so thought this would be
a good option to have.
-Adjusted wording for clarity across all tabs
-Adjusted capitilzation for consistency
-Color buttons are now 24x24 instead of 32x32.
-Misc adjustments to spacing and layouts.
-Replaced ZoomToFitiPringBounds checkbox with Combobox and mapped index to existing
config item.
-Added color selection for crosshair.
* (Add) Settings & Issues: Enable or disable Empty Layers
* (Add) PrusaSlicer Printer: Nova Bene4 Mono
* (Add) CWS: Support the GRAY2RGB and RBG2GRAY encoding for Bene Mono
* (Add) Layer issue Z map paired with layer navigation tracker bar
* (Change) Shortcuts: + and - to go up and down on layers were change to W and S keys. Reason: + and - are bound to zoom and can lead to problems
* (Upgrade) OpenCV from 4.2 to 4.3
* (Fix) CWS: Add missing Platform X,Y,Z size when converting from SL1
* (Fix) CWS: Invert XY resolution when converting from SL1
This commit add support for highlighting of indidivual issues,
crosshair support, and changes to mouse based navigation
to make those added features a bit more useful. Here's a
quick summary of what is included in this commit:
-Issue Highlighting
-Edit Pixel Operation Highlighting
-Crosshair Support
-Configurable auto-zoom level support
-Mouse-Based Navigation updates for the issue list, layer preview
and pixel edit mode.
* (Add) Elapsed time to the Log list
* (Add) Setting - Issues - Islands: Allow diagonal bonds with default to false (#22)
* (Change) Tool - Repair Layers: Allow set both iterations to 0 to skip closing and opening operations and allow remove islands independently
* (Change) Title - file open time from miliseconds to seconds
* (Improvement) Tool - Repair Layers: Layer image will only read/save if required and if current layer got modified
* (Fix) Setting - Issues - Islands: "Pixels below this value will turn black, otherwise white" (Threshold) was not using the set value and was forcing 1
* (Fix) Remove duplicated log for repair layers and issues
* (Add) Pixel Editor: Eraser - Right click over a white pixel to remove it whole linked area (Fill with black) (#7)
* (Add) Pixel Editor: Parallel layer image save when apply modifications
* (Add) GCode: Save to clipboard
* (Change) Issues Repair: Default noise removal iterations to 0
* (Fix) Edit: Remove decimal plates for integer properties
* (Fix) cws: Exposure time was in seconds, changed to ms (#17)
* (Fix) cws: Calculate blanking time (#17)
* (Fix) cws: Edit LiftHeight and Exposure Time was enforcing integer number
* (Fix) cws: GCode extra space between slices
* (Fix) cws and zcodex: Precision errors on retract height
* (Add) Partial update islands from current working layer and next layer when using pixel editor or island remove
* (Add) Setting: To enable or disable partial update islands
* (Change) Properties, Issues, Pixel Editor: ListView upgraded to a FastObjectListView, resulting in faster renders, sorting capabilities, column order, groups with counter, selection, hot tracking, filtering and empty list message
* (Change) Log: ObjectListView upgraded to a FastObjectListView
* (Change) Bunch of icons
* (Add) Allow to save properties to clipboard
* (Add) Tool: Layer Repair - Allow remove islands below or equal to a pixel count (Suggested by: Nicholas Taylor)
* (Add) Issues: Allow sort columns by click them (Suggested by: Nicholas Taylor)
* (Improvement) Tool: Pattern - Prevent open this tool when unable to pattern due lack of space
* (Fix) Tool: Layer Repair - When issues are not caculated before, they are computed but user settings are ignored
* (Add) Preview: Allow import images from disk and replace preview image
* (Add) Issue and Pixel Editor ListView can now reorder columns
* (Add) Pixel Editor: Button "Clear" remove all the modifications
* (Add) Pixel Editor: Button "Apply All" to apply the modifications
* (Add) Pixel Editor: Double click items will track and position over the draw
* (Fix) Pixel Editor: Label "Operations" was not reset to 0 after apply the modifications
* (Fix) Pixel Editor: Button "Remove" tooltip
* (Fix) Pixel Editor: Drawing - Bursh Area - px to px²
* (Add) PrusaSlicer Printer: Elegoo Mars 2 Pro
* (Add) PrusaSlicer Printer: Creality LD-002H
* (Add) PrusaSlicer Printer: Voxelab Polaris
* (Add) File Format: UVJ (#8)
* (Add) Mutataor: Pixel Dimming
* (Add) Pixel Editor tab with new drawing functions
* (Add) Pixel Editor: Bursh area and shape
* (Add) Pixel Editor: Supports
* (Add) Pixel Editor: Drain holes
* (Add) Settings for pixel editor
* (Add) Setting: File open default directory
* (Add) Setting: File save default directory
* (Add) Setting: File extract default directory
* (Add) Setting: File convert default directory
* (Add) Setting: File save prompt for overwrite (#10)
* (Add) Setting: File save preffix and suffix name
* (Add) Setting: UVtools version to the title bar
* (Improvement) Force same directory as input file on dialogs
* (Improvement) Pattern: Better positioning when not using an anchor, now it's more center friendly
* (Change) Setting: Start maximized defaults to true
* (Fix) Pattern: Calculated volume was appending one margin width/height more
* (Fix) When cancel a file load, some shortcuts can crash the program as it assume file is loaded
* (Fix) pws: Encode using the same count-of-threshold method as CBDDLP (ezrec/uv3dp#79)
* (Add) Thumbnail image can now saved to clipboard
* (Add) Setting to allow choose default file extension at load file dialog
* (Add) Double click middle mouse to zoom to fit to image
* (Add) Move mutator to move print volume around the plate
* (Add) Pattern tool
* (Change) Setting window now have tabs to compact the window height
* (Fix) Progress for mutators always show layer count instead of selected range
* (Add) UVtools now notify when a new version available is detected
* (Add) Mutator "Flip"
* (Add) Mutator "Rotate"
* (Add) User Settings - Many parameters can now be customized to needs
* (Add) File load elapsed time into Title bar
* (Add) Outline - Print Volume bounds
* (Add) Outline - Layer bounds
* (Add) Outline - Hollow areas
* (Add) Double click layer picture to Zoom To Fit
* (Improvement) Huge performance boost in layer reparing and in every mutator
* (Improvement) Layer preview is now faster
* (Improvement) Islands detection is now better and don't skip any pixel, more islands will show or the region will be bigger
* (Improvement) Islands search are now faster, it will jump from island to insland instead of search in every pixel by pixel
* (Improvement) ResinTrap detection and corrected some cases where it can't detect a drain
* (Improvement) Better memory optimization by dispose all objects on operations
* (Improvement) Image engine changed to use only OpenCV Mat instead of two and avoid converting from one to another, as result there's a huge performance gain in some operations (#6)
* (Improvement) UVtools now rely on UVtools.Core, and drop the UVtools.Parser. The Core now perform all operations and transformations inplace of the GUI
* (Improvement) If error occur during save it will show a message with the error
* (Improvement) When rotate layer it will zoom to fit
* (Improvement) Allow zoom to fit to print volume area instead of whole build volume
* (Removed) ImageSharp dependency
* (Removed) UVtools.Parser project
* (Fix) Nova3D Elfin printer values changed to Display Width : 131mm / Height : 73mm & Screen X: 2531 / Y: 1410 (#5)
* (Fix) Fade resizes make image offset a pixel from layer to layer because of integer placement, now it matain the correct position
* (Fix) sl1: AbsoluteCorrection, GammaCorrection, MinExposureTime, MaxExposureTime, FastTiltTime, SlowTiltTime and AreaFill was byte and float values prevents the file from open (#4)
* (Fix) zcodex: XCorrection and YCorrection was byte and float values prevents the file from open (#4)
* (Fix) cws: XCorrection and YCorrection was byte and float values prevents the file from open (#4)
* (Fix) cws: Wrong # char on .gcode file prevent from printing (#4)
Tiago Conceição
Bryce Yancey