* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* (Add) Calibrator - Stress Tower: Generates a stress tower to test the printer capabilities
* (Add) PrusaSlicer printer: UVtools Prusa SL1, for SL1 owners must use this profile to be UVtools compatible when using advanced tools
* (Fix) Tool - Calculator - Optimal model tilt: Layer height wasn't get pulled from loaded file and fixed to 0.05mm
* **(Fix) FileFormats:**
* When change a global print paramenter, it will only set this same parameter on every layer, keeping other parameters intact, it was reseting every parameter per layer to globals
* SL1: Verify if files are malformed and if there's missing configuration files (#126)
* CTBv3: Set EncryptionMode to 0x2000000F, this allow the use of per layer settings
* (Add) PrusaSlicer printers:
* Peopoly Phenom XXL
* QIDI 3D ibox mono
* Wanhao CGR Mini Mono
* Wanhao CGR Mono
* (Add) PrusaSlicer light supports profiles
* (Add) Calibration - Elephant Foot: Mirror output
* (Add) Calibration - XYZ Accuracy: Mirror output
* (Add) Calibration - Tolerance: Mirror output
* (Add) Calibration - Grayscale: Mirror output
* (Add) Scripts on github
* (Change) Save 'Display Width' and 'Height' to calibration profiles and load them back only if file format aware from these properties
* (Fix) Tool - Morph: Set a rectangular 3x3 kernel by default
* (Fix) Tool - Blur: Set a rectangular 3x3 kernel by default
* (Fix) Calibration - Elephant Foot: Include part scale on profile text
* (Fix) MSI dont store instalation path (#121)
This release bump the major version due the introduction of .NET 5.0, the discontinuation old UVtools GUI project and the new calibration wizards.
* (Upgrade) From .NET Core 3.1 to .NET 5.0
* (Upgrade) From C# 8.0 to C# 9.0
* (Upgrade) From Avalonia preview6 to rc1
* Bug: The per layer data gets hidden and not auto height on this rc1
* (Add) Setting - General - Windows / dialogs:
* **Take into account the screen scale factor to limit the dialogs windows maximum size**: Due wrong information UVtools can clamp the windows maximum size when you have plenty more avaliable or when use in a secondary monitor. If is the case disable this option
* **Horizontal limiting margin:** Limits windows and dialogs maximum width to the screen resolution less this margin
* **Vertical limiting margin:** Limits windows and dialogs maximum height to the screen resolution less this margin
* (Add) Setting - General: Take into account the screen scale factor to limit the dialogs windows maximum size. Due wrong information UVtools can cap the windows maximum size when you have plenty more avaliable or when use in a secondary monitor. If is the case disable this option
* (Add) Ctrl + Shift + Z to undo and edit the last operation (If contain a valid operation)
* (Add) Allow to deselect the current selected profile
* (Add) Allow to set a default profile to load in when open a tool
* (Add) ENTER and ESC hotkeys to message box
* (Add) Pixel dimming: Brightness percent equivalent value
* (Add) Raft relief: Allow to define supports margin independent from wall margin for the "Relief" type
* (Add) Pixel editor: Allow to adjust the remove and add pixel brightness values
* (Add) Calibration Menu:
* **Elephant foot:** Generates test models with various strategies and increments to verify the best method/values to remove the elephant foot.
* **XYZ Accuracy:** Generates test models with various strategies and increments to verify the XYZ accuracy.
* **Tolerance:** Generates test models with various strategies and increments to verify the part tolerances.
* **Grayscale:** Generates test models with various strategies and increments to verify the LED power against the grayscale levels.
* (Change) PW0, PWS, PWMX, PWMO, PWMS, PWX file formats to ignore preview validation and allow variations on the file format (#111)
* (Change) Tool - Edit print parameters: Increments from 0.01 to 0.5
* (Change) Tool - Resize: Increments from 0.01 to 0.1
* (Change) Tool - Rotate: Increments from 0.01 to 1
* (Change) Tool - Calculator: Increments from 0.01 to 0.5 and 1
* (Fix) PW0, PWS, PWMX, PWMO, PWMS, PWX file formats to replicate missing bottom properties cloned from normal properties
* (Fix) Drain holes to build plate were considered as traps, changed to be drains as when removing object resin will flow outwards
* (Fix) When unable to save the file it will change extension and not delete the temporary file
* (Fix) Pixel dimming wasn't saving all the fields on profiles
* (Fix) Prevent a rare startup crash when using demo file
* (Fix) Tool - Solifiy: Increase AA clean up threshold range, previous value wasn't solidifing when model has darker tones
* (Fix) Sanitize per layer settings, due some slicers are setting 0 at some properties that can cause problems with UVtools calculations, those values are now sanitized and set to the general value if 0
* (Fix) Update partial islands:
* Was leaving visible issues when the result returns an empty list of new issues
* Was jumping some modified sequential layers
* Was not updating the issue tracker map
* (Fix) Edit print parameters was not updating the layer data table information
* (Add) Pixel Dimming: Chamfer - Allow the number of walls pixels to be gradually varied as the operation progresses from the starting layer to the ending layer (#106)
* (Add) PrusaSlicer print profiles: 0.01, 0.02, 0.03, 0.04, 0.15, 0.2
* (Change) Morph: "Fade" to "Chamfer" naming, created profiles need redo
* (Change) Pixel Dimming: Allow start with 0px walls when using "Walls Only"
* (Change) PrusaSlicer print profiles names, reduced bottom layers and raft height
* (Remove) PrusaSlicer print profiles with 3 digit z precision (0.025 and 0.035)
* (Fix) PW0, PWS, PWMX, PWMO, PWMS, PWX file formats, where 4 offsets (16 bytes) were missing on preview image, leading to wrong table size. Previous converted files with UVtools wont open from now on, you need to reconvert them. (ezrec/uv3dp#124)
* (Fix) Unable to run Re-Height tool due a rounding problem on some cases (#101)
* (Fix) Layer preview end with exception when no per layer settings are available (SL1 case)
* (Add) Program start elapsed seconds on Log
* (Add) Lift heights @ speeds, retract speed, light-off information to status bar
* (Fix) Per layer settings are being lost when doing operations via tools that changes the layer count
* (Fix) Current layer height mm was being calculated instead of showing the stored position Z value (For hacked files)
* (Fix) Zip: By using hacked gcodes were possible to do a lift sequence without returning back to Z layer position
* (Fix) ZCodex: Read per layer lift height/speed, retract speed and pwm from GCode
* (Fix) Status bar, layer top and bottom bar: Break content down for the next line if window size overlaps the controls
* (Fix) Status bar: Make right buttons same height as left buttons
* (Improvement) CWS: Better gcode parser for decoding
* (Change) GCodes: Cure commands (Light-on/Cure time/Light-off) are only exposed when exposure time and pwm are present and greater than 0 [Safe guard]
* (Change) Zip: If only one G0 command found per layer, it will be associated to the cure z position (No lift height)
* (Change) Merged bottom/normal exposure times on status bar
* (Change) Tabs: Change controls spacing from 5 to 2 for better looking
* (Change) Deploy UVtools self-contained per platform specific: (#89)
* Platform optimized
* Reduced the package size
* Includes .NET Core assemblies and dont require the installation of .NET Core
* Can execute UVtools by double click on "UVtools" file or via ".\UVtools" on terminal
* **Naming:** UVtools_[os]-[architecture]_v[version].zip
* **"universal"** zip file that includes the portable version, os and architecture independent but requires dotnet to run, these build were used in all previous versions
* (Add) photons file format (Read-only)
* (Add) Allow mouse scroll wheel on layer slider and issue tracker to change layers (#81)
* (Add) Menu - Help - Open settings folder: To open user settings folder
* (Add) When a file doesn't have a print time field or it's 0, UVtools calculate the approximate time based on parameters
* (Add) Per layer settings override on UVtools layer core
* (Add) Tool - Edit print parameters: Allow change per layer settings on a layer range
* (Add) Tool Window - Layer range synchronization and lock for single layer navigation (Checkbox)
* (Add) Tool Window - Change the start layer index on range will also change the layer image on background
* (Improvement) Adapt every file format to accept per layer settings where possible
* (Improvement) Better gcode checks and per layer settings parses
* (Change) When converting to CTB, version 3 of the file will be used instead of version 2
* (Change) When converting to photon or cbddlp, version 2 of the file will be used instead of version 2
* (Change) New logo, thanks to (Vinicius Silva @photonsters)
* (Fix) MSI installer was creating multiple entries/uninstallers on windows Apps and Features (#79)
* (Fix) Release builder script (CreateRelease.WPF.ps1): Replace backslash with shash for zip releases (#82)
* (Fix) CWS file reader when come from Chitubox (#84)
* (Fix) CWS was introducing a big delay after each layer, LiftHeight was being used 2 times instead of LiftSpeed (#85)
* (Fix) CWS fix Build Direction property name, was lacking a whitespace
* (Fix) Layer bounds was being show for empty layers on 0x0 position with 1px wide
* (Fix) Empty layers caused miscalculation of print volume bounds
* (Fix) Recalculate GCode didn't unlock save button
* (Fix) Tool - Calculator - Light-Off Delay: Wasn't calculating bottom layers
* (Change) Drop a digit from program version for simplicity, now: MAJOR.MINOR.PATCH
* **Major:** new UI, lots of new features, conceptual change, incompatible API changes, etc.
* **Minor:** add functionality in a backwards-compatible manner
* **Patch:** backwards-compatible bug fixes
* (Upgrade) Avalonia framework to preview6
* (Add) Tool - Calculator: Convert millimeters to pixels
* (Add) Tool - Calculator: Find the optimal "Ligth-Off Delay"
* (Add) Internal abstraction of display size to all file formats
* (Add) Default demo file that loads on startup when no file is specified (this can be disable/enabled on settings)
* (Add) Issue: Overhangs - Detects potential overhangs on layers (#64)
* (Add) PrusaSlicer Printer: Phrozen Sonic Mini 4K
* (Improvement) CWS: Allow read files with "slice*" filenames as content (#67)
* (Improvement) Allow convert chitubox files to CWS Bene4 Mono printer, must configure a printer containing "Bene4 Mono" name on Chitubox (#67)
* (Improvement) Edit print parameters: Show changes on confirm dialog
* (Improvement) Edit print parameters: Dedicated reset button hides when value is unchanged
* (Improvement) More detailed descriptions on error messages
* (Fix) Some islands wont remove from list when many selected and click remove
* (Fix) Extract: Use trail zeros to layer filenames
* (Fix) MSI installer not creating shortcuts (#66)
* (Add) Settings & Issues: Enable or disable Empty Layers
* (Add) PrusaSlicer Printer: Nova Bene4 Mono
* (Add) CWS: Support the GRAY2RGB and RBG2GRAY encoding for Bene Mono
* (Add) Layer issue Z map paired with layer navigation tracker bar
* (Change) Shortcuts: + and - to go up and down on layers were change to W and S keys. Reason: + and - are bound to zoom and can lead to problems
* (Upgrade) OpenCV from 4.2 to 4.3
* (Fix) CWS: Add missing Platform X,Y,Z size when converting from SL1
* (Fix) CWS: Invert XY resolution when converting from SL1
* (Add) PrusaSlicer Printer: Elegoo Mars 2 Pro
* (Add) PrusaSlicer Printer: Creality LD-002H
* (Add) PrusaSlicer Printer: Voxelab Polaris
* (Add) File Format: UVJ (#8)
* (Add) Mutataor: Pixel Dimming
* (Add) Pixel Editor tab with new drawing functions
* (Add) Pixel Editor: Bursh area and shape
* (Add) Pixel Editor: Supports
* (Add) Pixel Editor: Drain holes
* (Add) Settings for pixel editor
* (Add) Setting: File open default directory
* (Add) Setting: File save default directory
* (Add) Setting: File extract default directory
* (Add) Setting: File convert default directory
* (Add) Setting: File save prompt for overwrite (#10)
* (Add) Setting: File save preffix and suffix name
* (Add) Setting: UVtools version to the title bar
* (Improvement) Force same directory as input file on dialogs
* (Improvement) Pattern: Better positioning when not using an anchor, now it's more center friendly
* (Change) Setting: Start maximized defaults to true
* (Fix) Pattern: Calculated volume was appending one margin width/height more
* (Fix) When cancel a file load, some shortcuts can crash the program as it assume file is loaded
* (Fix) pws: Encode using the same count-of-threshold method as CBDDLP (ezrec/uv3dp#79)
* (Add) UVtools now notify when a new version available is detected
* (Add) Mutator "Flip"
* (Add) Mutator "Rotate"
* (Add) User Settings - Many parameters can now be customized to needs
* (Add) File load elapsed time into Title bar
* (Add) Outline - Print Volume bounds
* (Add) Outline - Layer bounds
* (Add) Outline - Hollow areas
* (Add) Double click layer picture to Zoom To Fit
* (Improvement) Huge performance boost in layer reparing and in every mutator
* (Improvement) Layer preview is now faster
* (Improvement) Islands detection is now better and don't skip any pixel, more islands will show or the region will be bigger
* (Improvement) Islands search are now faster, it will jump from island to insland instead of search in every pixel by pixel
* (Improvement) ResinTrap detection and corrected some cases where it can't detect a drain
* (Improvement) Better memory optimization by dispose all objects on operations
* (Improvement) Image engine changed to use only OpenCV Mat instead of two and avoid converting from one to another, as result there's a huge performance gain in some operations (#6)
* (Improvement) UVtools now rely on UVtools.Core, and drop the UVtools.Parser. The Core now perform all operations and transformations inplace of the GUI
* (Improvement) If error occur during save it will show a message with the error
* (Improvement) When rotate layer it will zoom to fit
* (Improvement) Allow zoom to fit to print volume area instead of whole build volume
* (Removed) ImageSharp dependency
* (Removed) UVtools.Parser project
* (Fix) Nova3D Elfin printer values changed to Display Width : 131mm / Height : 73mm & Screen X: 2531 / Y: 1410 (#5)
* (Fix) Fade resizes make image offset a pixel from layer to layer because of integer placement, now it matain the correct position
* (Fix) sl1: AbsoluteCorrection, GammaCorrection, MinExposureTime, MaxExposureTime, FastTiltTime, SlowTiltTime and AreaFill was byte and float values prevents the file from open (#4)
* (Fix) zcodex: XCorrection and YCorrection was byte and float values prevents the file from open (#4)
* (Fix) cws: XCorrection and YCorrection was byte and float values prevents the file from open (#4)
* (Fix) cws: Wrong # char on .gcode file prevent from printing (#4)
* (Add) cws: Allow change layer PWM value
* (Update) Dependency ImageSharp from 1.0.0-rc0002 to 1.0.0-rc0003 (It fix a error on resize function)
* (Fix) cws: GCode 0 before G29
* (Fix) Phrozen Sonic Mini: Display Height from 66.04 to 68.04
* (Fix) Zortrax Inkspire: Display and Volume to 74.67x132.88
* (Fix) Layer repair tool allow operation when every repair checkbox is deselected
Tiago Conceição