-Adjusted wording for clarity across all tabs
-Adjusted capitilzation for consistency
-Color buttons are now 24x24 instead of 32x32.
-Misc adjustments to spacing and layouts.
-Replaced ZoomToFitiPringBounds checkbox with Combobox and mapped index to existing
config item.
-Added color selection for crosshair.
* (Add) Settings & Issues: Enable or disable Empty Layers
* (Add) PrusaSlicer Printer: Nova Bene4 Mono
* (Add) CWS: Support the GRAY2RGB and RBG2GRAY encoding for Bene Mono
* (Add) Layer issue Z map paired with layer navigation tracker bar
* (Change) Shortcuts: + and - to go up and down on layers were change to W and S keys. Reason: + and - are bound to zoom and can lead to problems
* (Upgrade) OpenCV from 4.2 to 4.3
* (Fix) CWS: Add missing Platform X,Y,Z size when converting from SL1
* (Fix) CWS: Invert XY resolution when converting from SL1
This commit add support for highlighting of indidivual issues,
crosshair support, and changes to mouse based navigation
to make those added features a bit more useful. Here's a
quick summary of what is included in this commit:
-Issue Highlighting
-Edit Pixel Operation Highlighting
-Crosshair Support
-Configurable auto-zoom level support
-Mouse-Based Navigation updates for the issue list, layer preview
and pixel edit mode.
* (Add) Menu - Help - Benchmark: Run benchmark test to measure system performance
* (Fix) Properties listview trigger an error when there are no groups to show
* (Fix) Elfin: "(Number of Slices = x)" to ";Number of Slices = x" (#24)
* (Add) Elapsed time to the Log list
* (Add) Setting - Issues - Islands: Allow diagonal bonds with default to false (#22)
* (Change) Tool - Repair Layers: Allow set both iterations to 0 to skip closing and opening operations and allow remove islands independently
* (Change) Title - file open time from miliseconds to seconds
* (Improvement) Tool - Repair Layers: Layer image will only read/save if required and if current layer got modified
* (Fix) Setting - Issues - Islands: "Pixels below this value will turn black, otherwise white" (Threshold) was not using the set value and was forcing 1
* (Fix) Remove duplicated log for repair layers and issues
* (Add) Pixel Editor: Eraser - Right click over a white pixel to remove it whole linked area (Fill with black) (#7)
* (Add) Pixel Editor: Parallel layer image save when apply modifications
* (Add) GCode: Save to clipboard
* (Change) Issues Repair: Default noise removal iterations to 0
* (Fix) Edit: Remove decimal plates for integer properties
* (Fix) cws: Exposure time was in seconds, changed to ms (#17)
* (Fix) cws: Calculate blanking time (#17)
* (Fix) cws: Edit LiftHeight and Exposure Time was enforcing integer number
* (Fix) cws: GCode extra space between slices
* (Fix) cws and zcodex: Precision errors on retract height
* (Add) Pixel Editor - Supports and Drain holes: AntiAliasing
* (Add) Pixel Editor - Drawing: Line type and defaults to AntiAliasing
* (Add) Pixel Editor - Drawing: Line thickness to allow hollow shapes
* (Add) Pixel Editor - Drawing: Layer depth, to add pixels at multiple layers at once
* (Add) Pixel Editor: Text writing
* (Add) Hold "ALT" key when double clicking over items to invert AutoZoom setting, prevent or do zoom in issues or pixels, this will behave as !AutoZoom as long key is held
* (Improvement) Partial island update speed, huge boost performance over large files
* (Add) Partial update islands from current working layer and next layer when using pixel editor or island remove
* (Add) Setting: To enable or disable partial update islands
* (Change) Properties, Issues, Pixel Editor: ListView upgraded to a FastObjectListView, resulting in faster renders, sorting capabilities, column order, groups with counter, selection, hot tracking, filtering and empty list message
* (Change) Log: ObjectListView upgraded to a FastObjectListView
* (Change) Bunch of icons
* (Add) Mutator: Threshold pixels
* (Change) Mutator: PyrDownUp - Name to "Big Blur" and add better description of the effect
* (Change) Mutator: SmoothMedian - Better description
* (Change) Mutator: SmoothGaussian - Better description
* (Fix) Tool: Layer Re-Height - When go lower heights the pixels count per layer statistics are lost
* (Fix) "Pixel Edit" has the old tooltip text (#14)
* (Fix) Readme: Text fixes (#14)
* (Add) Allow to save properties to clipboard
* (Add) Tool: Layer Repair - Allow remove islands below or equal to a pixel count (Suggested by: Nicholas Taylor)
* (Add) Issues: Allow sort columns by click them (Suggested by: Nicholas Taylor)
* (Improvement) Tool: Pattern - Prevent open this tool when unable to pattern due lack of space
* (Fix) Tool: Layer Repair - When issues are not caculated before, they are computed but user settings are ignored
* (Add) Preview: Allow import images from disk and replace preview image
* (Add) Issue and Pixel Editor ListView can now reorder columns
* (Add) Pixel Editor: Button "Clear" remove all the modifications
* (Add) Pixel Editor: Button "Apply All" to apply the modifications
* (Add) Pixel Editor: Double click items will track and position over the draw
* (Fix) Pixel Editor: Label "Operations" was not reset to 0 after apply the modifications
* (Fix) Pixel Editor: Button "Remove" tooltip
* (Fix) Pixel Editor: Drawing - Bursh Area - px to px²
* (Add) Layer remove button
* (Add) Tool: Layer removal
* (Add) Layer Repair tool: Remove empty layers
* (Add) Issues: Remove a empty layer will effectively remove the layer
* (Fix) SL1: When converting to other format in some cases the parameters on Printer Notes were not respected nor exported (#12)
* (Fix) Pixel Editor: Draw pixels was painting on wrong positions after apply, when refreshing layer some pixels disappear (Spotted by Nicholas Taylor)
* (Add) Issue: EmptyLayer - Detects empty layers were image is all black with 0 pixels to cure
* (Add) Toolbar and pushed layer information to bottom
* (Add) Information: Cure pixel count per layer and percentage against total lcd pixels
* (Add) Information: Bounds per layer
* (Add) Zip: Compability with Formware zip files
* (Add) PrusaSlicer Printer: Elegoo Mars 2 Pro
* (Add) PrusaSlicer Printer: Creality LD-002H
* (Add) PrusaSlicer Printer: Voxelab Polaris
* (Add) File Format: UVJ (#8)
* (Add) Mutataor: Pixel Dimming
* (Add) Pixel Editor tab with new drawing functions
* (Add) Pixel Editor: Bursh area and shape
* (Add) Pixel Editor: Supports
* (Add) Pixel Editor: Drain holes
* (Add) Settings for pixel editor
* (Add) Setting: File open default directory
* (Add) Setting: File save default directory
* (Add) Setting: File extract default directory
* (Add) Setting: File convert default directory
* (Add) Setting: File save prompt for overwrite (#10)
* (Add) Setting: File save preffix and suffix name
* (Add) Setting: UVtools version to the title bar
* (Improvement) Force same directory as input file on dialogs
* (Improvement) Pattern: Better positioning when not using an anchor, now it's more center friendly
* (Change) Setting: Start maximized defaults to true
* (Fix) Pattern: Calculated volume was appending one margin width/height more
* (Fix) When cancel a file load, some shortcuts can crash the program as it assume file is loaded
* (Fix) pws: Encode using the same count-of-threshold method as CBDDLP (ezrec/uv3dp#79)
* (Add) Allow chitubox, phz, pws, pw0 files convert to cws
* (Add) Allow convert between cbddlp, ctb and photon
* (Add) Allow convert between pws and pw0
* (Improvement) Layers can now have modified heights and independent parameters (#9)
* (Improvement) UVtools now generate better gcode and detect the lack of Lift and same z position and optimize the commands
* (Fix) zcodex: Wasn't reporting layer decoding progress
* (Add) Thumbnail image can now saved to clipboard
* (Add) Setting to allow choose default file extension at load file dialog
* (Add) Double click middle mouse to zoom to fit to image
* (Add) Move mutator to move print volume around the plate
* (Add) Pattern tool
* (Change) Setting window now have tabs to compact the window height
* (Fix) Progress for mutators always show layer count instead of selected range
* (Add) PrusaSlicer Printer "EPAX X10 4K Mono"
* (Improvement) Better progress window with real progress and cancel button
* (Improvement) Mutators text and name
* (Fix) sl1: After save file gets decoded again
* (Fix) photon, cbddlp, ctb, phz, pws, pw0: Unable to save file, not closed from the decode session
* (Fix) zcodex: Unable to convert file
* (Fix) images: Wasn't opening
* (Fix) images: Wasn't saving
* (Fix) When click on button "New version is available" sometimes it crash the program
* (Fix) Force 1 layer scroll when using Mouse Wheel to scroll the tracker bar
* (Fix) PrusaSlicer printers: Mirror vertically instead to produce equal orientation compared with chitubox
* (Add) UVtools now notify when a new version available is detected
* (Add) Mutator "Flip"
* (Add) Mutator "Rotate"
* (Add) User Settings - Many parameters can now be customized to needs
* (Add) File load elapsed time into Title bar
* (Add) Outline - Print Volume bounds
* (Add) Outline - Layer bounds
* (Add) Outline - Hollow areas
* (Add) Double click layer picture to Zoom To Fit
* (Improvement) Huge performance boost in layer reparing and in every mutator
* (Improvement) Layer preview is now faster
* (Improvement) Islands detection is now better and don't skip any pixel, more islands will show or the region will be bigger
* (Improvement) Islands search are now faster, it will jump from island to insland instead of search in every pixel by pixel
* (Improvement) ResinTrap detection and corrected some cases where it can't detect a drain
* (Improvement) Better memory optimization by dispose all objects on operations
* (Improvement) Image engine changed to use only OpenCV Mat instead of two and avoid converting from one to another, as result there's a huge performance gain in some operations (#6)
* (Improvement) UVtools now rely on UVtools.Core, and drop the UVtools.Parser. The Core now perform all operations and transformations inplace of the GUI
* (Improvement) If error occur during save it will show a message with the error
* (Improvement) When rotate layer it will zoom to fit
* (Improvement) Allow zoom to fit to print volume area instead of whole build volume
* (Removed) ImageSharp dependency
* (Removed) UVtools.Parser project
* (Fix) Nova3D Elfin printer values changed to Display Width : 131mm / Height : 73mm & Screen X: 2531 / Y: 1410 (#5)
* (Fix) Fade resizes make image offset a pixel from layer to layer because of integer placement, now it matain the correct position
* (Fix) sl1: AbsoluteCorrection, GammaCorrection, MinExposureTime, MaxExposureTime, FastTiltTime, SlowTiltTime and AreaFill was byte and float values prevents the file from open (#4)
* (Fix) zcodex: XCorrection and YCorrection was byte and float values prevents the file from open (#4)
* (Fix) cws: XCorrection and YCorrection was byte and float values prevents the file from open (#4)
* (Fix) cws: Wrong # char on .gcode file prevent from printing (#4)
* (Fix) phz: Files with encryption or sliced by chitubox produced black images after save due not setting the image address nor size (Spotted by Burak Cezairli)
* (Add) cws: Allow change layer PWM value
* (Update) Dependency ImageSharp from 1.0.0-rc0002 to 1.0.0-rc0003 (It fix a error on resize function)
* (Fix) cws: GCode 0 before G29
* (Fix) Phrozen Sonic Mini: Display Height from 66.04 to 68.04
* (Fix) Zortrax Inkspire: Display and Volume to 74.67x132.88
* (Fix) Layer repair tool allow operation when every repair checkbox is deselected
* (Add) Resin Trap issue validator and repairer - Experimental Feature (#3)
* (Add) Layer Repair tool can now fix Resin Traps when selected
* (Add) "Remove" issues button fix selected Resin traps, the operation now run under a thread and in a parallel way, preventing the GUI from freeze
* (Change) "Repair Layers" button renamed to "Repair Layers and Issues"
* (Fix) When do a "repair layers" before open the Issue tab, when open next it will recompute issues without the need
* (Add) Button save layer image to Clipboard
* (Change) Go to issue now zoom at bouding area instead of first pixels
* (Change) Layer navigation panel width increased in 20 pixels, in some cases it was overlaping the slider
* (Change) Actual layer information now have a depth border
* (Change) Increased main GUI size to X: 1800 and Y: 850 pixels
* (Change) If the GUI window is bigger than current screen resolution, it will start maximized istead
* (Fix) cbddlp: AntiAlias is number of _greys_, not number of significant bits (ezrec/uv3dp#75)
* (Fix) Outline not working as before, due a forget to remove test code
* (Add) Able to install only the desired profiles and not the whole lot (Suggested by: Ingo Strohmenger)
* (Add) Update manager for PrusaSlicer profiles
* (Add) If PrusaSlicer not installed on system it prompt for installation (By open the official website)
* (Fix) Prevent profiles instalation when PrusaSlicer is not installed on system
* (Fix) The "Issues" computation sometimes fails triggering an error due the use of non concurrent dictionary
* (Fix) Print profiles won't install into PrusaSlicer
Tiago Conceição
Bryce Yancey