- (Upgrade) EmguCV from 4.5.1 to 4.5.2
- **File formats:**
- (Add) Getter `IsAntiAliasingEmulated`: Gets whatever a file format uses real or emulated AntiAliasing
- (Add) Getter `IsDisplayPortrait`: Gets if the display is in portrait mode
- (Add) Getter `IsDisplayLandscape`: Gets if the display is in landscape mode
- **Tool - Resize:** (#235)
- (Fix) Division by 0 when start layer is equal to end layer
- (Fix) Calculations when using the option "Increase or decrease towards 100%"
- (Add) About window: OpenCV build number and a button to copy build information to clipboard
- (Improvement) Exposure exposure finder: Improve the **Multiple brightness** section to auto fill with correct values for file formats that use time fractions to emulate AntiAliasing, this can be used to replace the **Multiple exposures** section
- (Fix) UVJ: Error when using a null or empty layer array on manifest `config.json` file (#232)
- (Fix) GCode parser: When only a G4/wait command is present on a layer it was setting the global exposure time and discard the this value per layer
- **File formats:**
- (Add) CXDLP v2
- (Improved) GR1, MDLP, CXDLP decode and encode performance and memory optimization
- (Remove) CXDLP v1 from available formats
- (Add) Pixel editor - Drawing: New brushes of shapes/polygons
- (Upgrade) .NET from 5.0.6 to 5.0.7
- (Fix) When there are issues on the list, executing any operation will navigate to the last layer
- (Fix) PrusaSlicer printer: Rename "Creality HALOT-SKY CL-60" to "Creality HALOT-ONE CL-60"
- **Layer arithmetic:**
- (Add) Allow to use ':' to define a layer range to set, eg, 0:20 to select from 0 to 20 layers
- (Improvement) Modifications with set ROI and/or Mask(s) are only applied to target layer on that same regions
- (Improvement) Disallow set one layer to the same layer without any modification
- (Improvement) Clear and sanitize non-existing layers indexes
- (Improvement) Disable the layer range selector from dialog
- (Fix) Prevent error when using non-existing layers indexes
- (Fix) Allow use only a mask for operations
- (Fix) Implement the progress bar
- **File formats:**
- (Add) VDA.ZIP (Voxeldance Additive)
- (Improvement) Add a check to global `LightPWM` if 0 it will force to 255
- (Improvement) Add a check to layer `LightPWM` if 0 it will force to 255
- (Add) Allow to save the selected region (ROI) to a image file
- (Update) .NET 5.0.5 to 5.0.6
- (Fix) Getting the transposed rectangle in fliped images are offseting the position by -1
- (Fix) Tools: Hide ROI Region text when empty/not selected
- (Improvement) Applied some refactorings on code
- (Fix) MDLP, GR1 and CXDLP: Bad enconde of display width, display height and layer height properties
- (Upgrade) AvaloniaUI from 0.10.2 to 0.10.3
- (Change) PrusaSlicer printers: Set 'Light-Off Delay' and 'Bottom Light-Off Delay' to 0 as default to allow UVtools auto-compute the right value once open the file in
- **Exposure time finder:**
- Optimize layers by merge same position/exposure layers
- Add a fence option to the zebra bars
- Add a option to pattern the loaded model and generate multiple exposures on that
- Allow to generate tests without the holes feature
- Prevent from using more chamfers than the base height
- Removed two of the largest holes
- Hide not so often used 'Multiple brightness' and 'Multiple layer height' by default
- Disable Anti-Aliasing by default
- Change 'Part margin' from 1.5mm to 2.0mm
- Change 'Multiple exposures - Bottom exposure step' default to 0
- Fix a error when generating tests with multiple exposures
- Fix some typos
- **XYZ accuracy test:**
- Change 'Wall thickess' default from 2.5mm to 3.0mm
- (Improvement) Allow compute print time without a lift sequence
- (Upgrade) AvaloniaUI from 0.10 to 0.10.2
- (Remove) Unused assemblies
- **Issues**
- Improve the performance when loading big lists of issues into the DataGrid
- Auto refresh issues on the vertical highlight tracker once cath a modification on the Issues list
- **Layer preview - Difference:**
- Layer difference will now only check the pixels inside the union of previous, current and next layer bounding rectangle, increasing the performance and speed
- Previous and next layer pixels if both exists was not showing with the configured color and using the next layer color instead
- Respect Anti-Aliasing pixels and fade colors accordingly
- Unlock the possiblity of using the layer difference on first and last layer
- Add a option to show similar pixels instead of the difference
- Change previous default color from (255, 0, 255) to (81, 131, 82) for better depth preception
- Change next default color from (0, 255, 255) to (81, 249, 252) for better depth preception
- Change previous & next default color from (255, 0, 0) to (246, 240, 216) for better depth preception
- **(Fix) Pixel editor:**
- Modification was append instead of prepend on the list
- Modification was not updating the index number on the list
- (Fix) PrusaSlicer printer: Bene4 Mono screen, bed and height size
* **File formats:**
* PhotonS: Implement the write/encode method to allow to use this format and fix the thumbnail
* VDT: Allow to auto convert the .vdt to the target printer format using the Machine - Notes, using a flag: FILEFORMAT_YourPrinterExtension, for example: FILEFORMAT_CTB
* (Fix) Unable to convert files with no thumbnails to other file format that requires thumbnails
* **Tools:**
* (Add) Re-height: Option to Anti-Aliasing layers
* (Fix) Morph and Blur: The combobox was not setting to the selected item when preform a redo operation (Ctrl+Shift+Z)
* **GUI:**
* (Change) Progress window to be a grid element inside MainWindow, this allow to reuse the graphics and its elements without the need of spawning a Window instance everytime a progress is shown, resulting in better performance and more fluid transaction
* (Improvement) Clear issues when generating calibration tests
* **Core:**
* Write "Unhandled Exceptions" to an "errors.log" file at user settings directory
* Increase layer height max precision from 2 to 3 decimals
* **Settings - Layer Preview:**
* Allow to set hollow line thickness to -1 to fill the area
* Add tooltip for "Auto rotate on load": Auto rotate the layer preview on file load for a landscape viewport
* Add option to masks outline color and thickness
* Add option to clear ROI when adding masks
* Add option "Auto flip on load": Auto flip the layer preview on file load if the file is marked to print mirrored on the printer LCD
* **Layer preview:**
* Add selectable rotation directions 90º (CW and CCW)
* Add preview flip (CTRL+F) horizontally and/or vertically
* Add maskable regions to process on a layer (SHIFT + Alt + Click) on a area
* ROI: Shortcut "Shift + left click" now also selects hollow black areas inside a white perimeter
* ROI: Shortcut "ESC + Shift" to clear only the ROI and leave masks in
* Fix a crash when using the pixel picker tool outside image bounds
* **Pixel editor:**
* Change drawings brush diameter limit from 255 to 4000 maximum
* When using layers below go lower than layer 0 it no longer apply the modifications
* **File formats:**
* Add an internal GCodeBuilder to generate identical gcode within formats with auto convertion, managing features and parsing information
* Internally rearrange formats properties and pass values to the base class
* Fix "Save As" filename when using formats with dual extensions
* CBDDLP and CTB: "LightPWM" was setting "BottomLightPWM" instead
* CWS: Fix problem with filenames with dots (.) and ending with numbers (#171)
* CWS: Improved the enconding and decoding performance
* CWS: Implement all available print paramenters and per layer, missing values are got from gcode interpretation
* CWS: Use set "light off delay" layer value instead of calculating it
* CWS: Get light off delay per layer parsed from gcode
* CWS - RGB flavour (Bene4 Mono): Warn about wrong resolution if width not multiples of 3 (#171)
* ZCode: Allow to set Bottom and Light intensity (LightPWM) on paramters and per layer
* ZCode: Allow to change bottom light pwm independent from normal light pwm
* LGS: Light off and bottom light off was setting the value on the wrong units
* UVJ: Unable to set per layer parameters
* **Issues:**
* When computing islands and resin traps together, they will not compute in parallel anymore to prevent CPU and tasks exaustion, it will calculate islands first and then resin traps, this should also speed up the process on weaker machines
* Gather resin trap areas together when computing for other issues to spare a decoding cycle latter
* When using a threshold for islands detection it was also appling it to the overhangs
* Fix the spare decoding conditional cycle for partial scans
* Change resin trap search from parallel to sync to prevent fake detections and missing joints at cost of speed (#13)
* **Tools:**
* Add layer selector: 'From first to current layer' and 'From current to last layer'
* I printed this file: Multiplier - Number of time(s) the file has been printed. Half numbers can be used to consume from a failed print. Example: 0.5x if a print canceled at 50% progress
* Pixel dimming: Increase wall thickness default from 5px to 10px
* Import layers: Importing layers was not marking layers as modified, then the save file won't save the new images in, to prevent other similar bugs, all layers that got replaced will be auto marked as modified
* (Add) Setting: Auto repair layers and issues on file load
* (Improvement) When ComputeIssuesOnLoad is enabled and issues are detected it will switch the view to the Issues tab
* **(Improvement) Raft Relief:**
* Add parameter "Mask layer index": Defines the mask layer to use and ignore the white blobs on the raft
* Increase the automatic support detection allowance on more odd shapes
* Prevent layer 0 to be used as a mask, if so it will quit
* If the ignored layer number are set and equal or larger than mask layer index it will quit
* Fix progress count when using ignored layers
* Change supports dilate kernel from Elipse to Rectangle for a better coverage of the pad
* Change the default values for a more conservative values
* (Fix) When both ComputeIssuesOnLoad and ComputeIssuesOnClickTab are enabled, clicking the issues tab will rescan for issues
* (Fix) Tools: Set a default profile insn't working
* (Fix) Redoing the last operation was not recovering the custom ROI on the operation
* (Add) File format: Zcode (Uniz IBEE)
* (Add) PrusaSlicer Printer: Uniz IBEE
* (Add) Extract: Output an "Layer.ini" file containing per layer data and include the Configuration.ini for Zip file formats
* (Improvement) Zip: Increase the GCode parsing performance
* (Fix) File formats: Wasn't set bottom / light off delay per individual layer on generic formats, defaulting every layer to 0
* (Fix) Edit print paramenters: When changing bottom layer count, layers didnt update thier properties
* (Add) Help - Material manager (F10): Allow to manage material stock and costs with statistic over time
* (Add) File - I printed this file (CTRL + P): Allow to select a material and consume resin from stock and print time from the loaded file
* **(Fix) PhotonWorkshop files: (#149)**
* CurrencySymbol to show the correct symbol and don't convert unknown values to prevent hacking
* Set PerLayerOverride to 1 only if any layer contains modified parameters that are not shared with the globals
* **(Fix) Clipboard:**
* Initing the clipboard for the first time was calling Undo and reseting parameters from layers with base settings
* Undo and redo make layer parameters to reset and recalculate position z, making invalid files when using with advanced tools
* (Fix) Tool - Edit print parameters: When editing per a layer range and reopen the tool it will show the previous set values
* **(Improvement) Calibration - Elephant Foot:** (#145)
* Remove text from bottom layers to prevent islands from not adhering to plate
* Add a option to extrude text up to a height
* **(Improvement) Calibration - Exposure time finder:** (#144)
* Increase the left and right margin to 10mm
* Allow to iterate over pixel brightness and generate dimmed objects to test multiple times at once
* **(Fix) File format PWS:**
* Some files would produce black layers if pixels are not full whites, Antialiasing level was not inherit from source
* Antialiasing level was forced 1 and not read the value from file properties
* Antialiasing threshold pixel math was producing the wrong pixel value
* **(Fix) Raw images (jpg, png, etc):** (#146)
* Set layer height to be 0.01mm by default to allow the use of some tools
* When add layers by clone or other tool it don't update layers height, positions, indexes, leading to crashes
* **(Fix) Actions - Import Layers:** (#146, #147)
* ROI calculation error leading to not process images that can potential fit inside the volumes
* Out-of-bounds calculation for Stack type
* Replace type was calculating out-of-bounds calculation like Stack type when is not required to and can lead to skip images
* Better image ROI colection for Insert and Replace types instead of capture the center most
* (Fix) Settings window: Force a redraw on open to fix auto sizes
* **(Fix) Exposure time finder:**
* Use a spiral square instead of configurable shapes to match the exact precise set pixels
* Set pixels as default values
* Optimized the pixel values to always produce a closed shape
* Rename cylinder to hole
* Crash when diameters are empty
* Profiles was not saving
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* (Add) PrusaSlicer printers:
* Peopoly Phenom XXL
* QIDI 3D ibox mono
* Wanhao CGR Mini Mono
* Wanhao CGR Mono
* (Add) PrusaSlicer light supports profiles
* (Add) Calibration - Elephant Foot: Mirror output
* (Add) Calibration - XYZ Accuracy: Mirror output
* (Add) Calibration - Tolerance: Mirror output
* (Add) Calibration - Grayscale: Mirror output
* (Add) Scripts on github
* (Change) Save 'Display Width' and 'Height' to calibration profiles and load them back only if file format aware from these properties
* (Fix) Tool - Morph: Set a rectangular 3x3 kernel by default
* (Fix) Tool - Blur: Set a rectangular 3x3 kernel by default
* (Fix) Calibration - Elephant Foot: Include part scale on profile text
* (Fix) MSI dont store instalation path (#121)
* (Add) RAM usage on title bar
* (Add) Clipboard manager: Undo (Ctrl + Z) and Redo (Ctrl + Y) modifications (Memory optimized)
* (Add) Current layer properties on information tab
* (Fix) Long windows with system zoom bigger than 100% were being hidden and overflow (#90)
* (Fix) Do not recompute issues nor properties nor reshow layer if operation is cancelled or failed
* (Add) Auto-updater: When a new version is detected UVtools still show the same green button at top,
on click, it will prompt for auto or manual update.
On Linux and Mac the script will kill all UVtools instances and auto-upgrade.
On Windows the user must close all instances and continue with the shown MSI installation
* (Add) Tool profiles: Create and remove named presets for some tools
* (Add) Event handler for handling non-UI thread exceptions
* (Fix) Mac: File - Open in a new window was not working
* (Fix) Tool - Rotate: Allow negative angles
* (Fix) Tool - Rotate: The operation was inverting the angle
* (Fix) Tools: Select normal layers can crash the program with small files with low layer count, eg: 3 layers total
* (Add) Support for PHZ zip files when renamed to .zip
* (Fix) ZIP: Allow to cancel on gather layers stage
* (Fix) ZIP: Thumbnails not showing nor saving
Tiago Conceição