- **(Add) PrusaSlicer printers:**
- Creality HALOT-MAX CL-133
- Nova3D Elfin2
- Nova3D Elfin2 Mono SE
- Nova3D Elfin3 Mini
- Nova3D Bene4
- Nova3D Bene5
- Nova3D Whale
- Nova3D Whale2
- **About box:**
- (Add) Runtime information
- (Fix) Limit panels width and height to not overgrow
- **(Fix) macOS:**
- macOS version auto-upgrade (Will only work on future releases and if running v2.16.0 or greater)
- Demo file not loading
- Auto disable windows scaling factor when on Monjave or greater on new instalations
- (Add) Tool: Raise platform on print finish
- (Add) CXDLP: Support for Halot MAX CL-133
- (Improvement) Tools: Better handling/validation of tools that are unable to run with abstraction
- (Improvement) CWS: Simplify filenames inside the archive
- (Upgrade) EmguCV from 4.5.2 to 4.5.3
- (Change) Allow to set layer `LightPWM` to 0
- (Fix) Arrange dropdown arrow from layer image save icon to be at center
- **Shortcuts:**
- (Add) (Ctrl + Shift + R) to turn on and cycle the Rotate modes
- (Add) (Ctrl + Shift + F) to turn on and cycle the Flip modes
- (Add) (Ctrl + Shift + B) to select the build volume as ROI
- **GUI:**
- (Add) Allow to drag and drop '.uvtop' files into UVtools to sequential show and load operations from files
- (Change) Rotate icon on layer preview
- (Upgrade) AvaloniaUI from 0.10.3 to 0.10.4
- **Tools:**
- (Add) 'Reset to defaults' button on every dialog
- (Improvement) Window size and position handling
- (Improvement) Constrain profile box width to not stretch the window
- (Improvement) ROI section design
- **Dynamic lift:**
- (Add) View buttons to show the largest/smallest layers
- (Add) Light-off mode: Set the light-off with an extra delay
- (Add) Light-off mode: Set the light-off without an extra delay
- (Add) Light-off mode: Set the light-off to zero
- (Improvement) Disable bottom and/or normal layer fields when the selected range is outside
- (Add) Settings - Automations: Light-off delay set modes
- (Fix) Exposure time finder: Add staircase, bullseye and counter triangles to feature count at thumbnail
- **Tools:**
- (Add) Pixel Arithmetic
- (Add) Layer arithmetic: Operator $ to perform a absolute difference
- (Add) Allow to save and auto restore operation settings per session (#195)
- (Add) Allow to auto select the print volume ROI
- (Add) Allow to export and import operation settings from files
- (Improvement) Calculator - LightOff delay: Hide the bottom properties or the tab if the file format don't support them (#193)
- (Change) 'Arithmetic' to 'Layer arithmetic'
- (Remove) 'Threshold pixels'
- (Fix) Solidfy was unable to save profiles
- (Fix) A redo operation (Ctrl + Shift + Z) wasn't restoring the settings when a default profile is set
- **Operations:**
- (Fix) Passing a roi mat to `ApplyMask` would cause unwanted results
- (Improvement) Allow pass a full/original size mask to `ApplyMask`
- **Scripting:**
- (Add) an script to create an printable file to clean the VAT (#170)
- (Improvement) Allow to change user input properties outside the initialization
- (Improvement) Auto format numerical input box with the fixed decimal cases
- (Add) Settings: Section 'Tools'
- (Improvement) GUI: The 'Lift, Retract and Light-off' at status bar now only shows for the supported formats
- (Fix) Print time estimation calculation was wrong since v2.9.3 due a lacking of parentheses on the logic
* **Operations:**
* Force validate all operations on execute if they haven't been before, if validation fails it will show the message error
* Add some utility functions to ease layer and mat allocation in the file
* Layer remove: Disallow to select and remove all layers
* Tool - Edit print parameters: Retract speed wasn't propagating the value to normal layers
* File formats: Better control, set and checking for null/empty thumbnails
* **Scripting:**
* Add scripting capability, this allow to run external scripts inside the GUI and take advantage of visual layout to display user input fields
* Scripts run under the "Roslyn Scripting API" and can make use of the whole C# language, this mean a huge boost compared to PowerShell scripts
* Scripts are written in the same way UVtools is, by learning and programing scripts you are learning the UVtools core
* For more information see the script sample: https://github.com/sn4k3/UVtools/tree/master/UVtools.ScriptSample
* To run scripts go to: Tools - Scripting
* **File formats:**
* Add a check and warning when opening an file that have a diferent layer and file resolution
* **Issues:**
* Add "Print height" as new type of issue detection, all layers that goes beyond maximum printer Z height will be flagged as PrintHeight issue
* Print height issues will not be automatical fixed, however user can fix it by remove some layers to counter the problem, still is recommended to resize object on slicer
* Fix unable to compute issues when only islands or overhangs are selected to be detected alone (#177)
* **Settings:**
* Add default directory for scripts on "General - File dialogs"
* Add checkbox on "Issues - Compute - Print height" to enable or disable this type of detection
* Add numerical on "Issues - Print height - Offset" to define a custom offset from Z top
* Fix default directories input width to not grow with text, it was overflowing on large strings
* **Menu - Help:**
* Add web link to "Wiki & tutorials"
* Add web link to "Facebook group"
* Add web link to "Report a issue"
* Add web link to "Ask a question"
* Add web link to "Suggest an improvement or new features"
Tiago Conceição