- **Dynamic lifts:**
- (Improvement) Remove the 'light-off delay' set logic as it is now better integrated on 'Wait time before cure' suggestion and should run/applied there if intended
- (Fix) Prevent set NaN values to lift height and/or speed
- (Fix) Lift height and speed for the current layer must be calculated from previous layer (#618)
- (Improvement) Windows auto-updater will install the update without dialogs, just displaying installation progress
- **File formats:**
- (Add) File extension: .gktwo.ctb to `ChituboxFile` to be able to convert files for UniFormation GKtwo under special CTB format
- (Add) UniFormation GKtwo compatibility under CTB format, if exporting JXS rename to CTB before open
- (Fix) CTB, CBDDLP, PHOTON, FDG, PHZ: Read and write files larger then 4GB (#608)
- **PCB Exposure:**
- (Add) Offset X/Y to offset the PCB from it origin
- (Add) Allow to toggle between "Show preview image cropped by it bounds" and "Show full preview image (The final result)"
- (Improvement) Use rectangle instead of line for center line primitive (#607)
- (Fix) Implement rotation to polygon and center line primitives (#607)
- (Fix) Macros in a single line was not being parsed (#607)
- (Fix) Invert color per file was not affecting primitives
- **Network printers:**
- (Add) Socket requests with TCP and UDP
- (Add) AnyCubic printer preset (However it can't upload a file)
- (Add) Scripts in request path to allow a first request to fetch data to the final request:
- A script starts with **<\?** and ends with **?>**
- First parameter is the first request to get response content from
- Second parameter is the regex pattern to match content with
- Third parameter is the final request that supports a parameter from regex matching group, eg: **{#1}** is match Group[1] value
- **Example:** <\? getfiles > {0}\/(\d+\.[\da-zA-Z]+), > printfile,{#1} ?>
- (Change) Allow to print a filename without send it when upload request path is empty
- (Fix) Do not show printers with empty requests
- (Change) Default layer compression to Lz4 instead of Png
- (Improvement) Application is now culture aware but set part of `NumberFormat` to the `InvariantCulture.NumberFormat`
- (Improvement) Material cost now show with the current culture currency symbol due previous change
- (Improvement) Better submit of bug reports using sections and forms
- (Improvement) Linux: AppImage now have a help manual with possible arguments and parameters
- (Improvement) macOS: Codesign app on auto-installer and auto-upgrade to bypass arm64 run restriction (#431)
- (Improvement) macOS: Rebuilt arm64 libcvextern.dylib to run with less dependencies (#431)
- (Improvement) macOS: Try to show missing dependencies from openCV (if any) on the error message
- (Fix) UI: layers sorted lexicographically instead of numerically in the issues list view (#611)
- (Fix) PrusaSlicer printer parameters: UniFormation GKtwo
- **UVtoolsCmd:**
- **print-properties:**
- (Change) `-b`, `--base` option to `-a`, `-all` to indicate all properties and sub-properties, now defaults to only show base properties
- (Add) `-r`, `--range` option to prints only the matching layer(s) index(es) in a range
- (Add) `-i`, `--indexes` option to prints only the matching layer(s) index(es)
- (Add) Command: `set-properties <input-file> <property=value> Set properties in a file or to it layers with new values`
- (Add) Command: `print-issues <input-file> Detect and print issues in a file`
- (Add) New option to the `run` command: `-p, --property <property=value> Set a property with a new value (Compatible with operations only)`
- (Remove) Command: `print-layers` as it has been moved to `print-properties`, use `-r :` to obtain same result as default on `print-layers`
- **Issues:**
- (Fix) Issues groups with only one issue was displaying the wrong area value
- (Fix) Volume incorrectly calculated, resulting in a high value for group of issues
- (Fix) Incorrect calculation of the bounding rectangle for a group of issues
- **Repair layers:**
- (Add) Switch to opt between "Re-detect the selected issues before repair" and "Use and repair the previous detected issues" (Default)
- (Improvement) Do not allow to run the tool if there are no detected issues when the option "Use and repair the previous detected issues" is selected
- (Improvement) Linux: Recompile libcvextern.so on a older system to be able to run on both older and newest system (#603)
- (Upgrade) .NET from 6.0.10 to 6.0.11
- **File formats:**
- (Add) Property: DisplayTotalOnTime
- (Add) Property: DisplayTotalOffTime
- (Add) SL1File Property: high_viscosity_tilt_time
- **Tools**
- **I printed this file**
- (Add) Display on time for the print information
- (Improvement) Labels on numeric box
- (Improvement) Show print time label formatted as hh:mm:ss
- **PCB Exposure:**
- (Improvement) Increase "Exposure time" maximum from 200s to 1000s (#592)
- (Fix) Set `BottomLightHeight` to 0
- (Fix) Set `TransitionLayerCount` to 0
- **Issues:**
- (Improvement) Overhang detection by using a dynamic cross kernel
- (Improvement) Bring back the discard logic of "false-positive" islands based on overhang detection but improve the threshold of the detection to be safer (#591, #591)
- **PrusaSlicer:**
- (Change) Elegoo Mars 2 to use file version 4
- (Change) Elegoo Mars 2 Pro to use file version 4
- (Add) Status bar: On and Off time (hh:mm:ss) as tooltip in the Print time label
- (Improvement) When any of libcvextern dependencies are missing, it try to show the missing libraries in the error message (Linux only)
- (Improvement) Auto-upgrade procedure for non-Windows systems
- (Improvement) macOS arm64 (M1/M2) can now run natively if installed via the auto installer script
- (Fix) Error on Mat cache manager when file have only one layer
- (Fix) Suggestion "Transition layer count" shows as never applied when using with file formats that use in-firmware transition layers
- (Upgrade) openCV from 4.5.4 to 4.6.0
- Custom library is now built to strip unused dependencies and reduce library size
- (Remove) arch and rhel packages in favor of a generic linux
- **File formats:**
- (Add) AnyCubic PM3R (#587)
- (Add) AnyCubic PMX2
- (Fix) LGS: `LightOffDelay` is `WaitTimeBeforeCure` in this format
- **PrusaSlicer printer:**
- (Add) AnyCubic Photon M3 Premium
- (Add) AnyCubic Photon Mono X2
- (Fix) Scripting: Unable to use sub-classes (#583)
- (Fix) Loading an image as file cause application to crash
- (Fix) "File - Send to" doesn't ignore case on file extension names resulting in ignore files in a uppercase even if extension is correct
- (Fix) Do not show layer material milliliters when value is 0 or the percentage is NaN
- (Fix) Auto-upgrade on Linux with AppImage integrated on system causes the file name to grow with hash strings
- **File formats:**
- (Add) `TransitionLayerCount` modifier to: Chitubox Zip, CWS, JXS, OSLA, PW*, UVJ, ZCodex, ZCode
- (Add) Utility methods for transition layers calculation/parse
- (Improvement) Calculate and set `TransitionLayerCount` property in file decode based on layer exposure time configuration
- **GCode:**
- (Improvement) GCode: Able to parse layer image file with appended numbers on the filename (Afecting CWS) (#577)
- (Fix) Bad parsing of the file when it comes from Lychee or NovaMaker slicer (Afecting CWS)
- (Fix) Incorrect parse of "Wait time before cure" from layers when printer require wait sync moves (Afecting CWS)
- **Tools:**
- (Add) External tests: The Complete Resin 3D Printing Settings Guide for Beginners
- (Add) External tests: 9 settings for faster printing
- (Improvement) Fade exposure time: Set `TransitionLayerCount` property with the affected layer count
- **Suggestions:**
- (Add) Transition layers: If you are printing flat on the build plate your model will print better when using a smooth transition exposure time instead of a harsh variation, resulting in reduced layer line effect and avoid possible problems due the large exposure difference.
This is not so important when your model print raised under a raft/supports unaffected by the bottom exposure, in that case, it's fine to ignore this.
- (Add) Model position: Printing on a corner will reduce the FEP stretch forces when detaching from the model during a lift sequence, benefits are: Reduced lift height and faster printing, less stretch, less FEP marks, better FEP lifespan, easier to peel, less prone to failure and use the screen pixels more evenly.
If the model is too large to fit within the margin(s) on the screen, it will attempt to center it on that same axis to avoid touching on screen edge(s) and to give a sane margin from it.
- **Status bar:**
- (Add) Transition layers: 0/-0.00s
- (Improvement) Change "Layer Height: 0.000mm" to "Layers: count @ 0.000mm"
- (Improvement) Change "Bottom layers: 0" to "Bottom layers: 0/0.000mm"
- (Change) Show user informative message about CTB Encrypted file format once per ten file loads
- (Upgrade) .NET from 6.0.9 to 6.0.10
- (Fix) Windows MSI installation not upgrading well when downgrade libraries
- **UI:**
- (Improvement) Auto show a horizontal scroll bar on wider than screen contents on the tool windows
- (Improvement) Move normal windows to zero position if negative and auto constrain height if necessary
- (Improvement) Set a minimum width and minimum height for tool windows
- (Fix) Setting - "Allow resize the tool windows" had been lost and no effect when checked
- (Add) Windows MSI - Option: Add installation directory to system PATH environment variable
- (Improvement) Better fetch of UVtools.Core.dll on PowerShell scripts under Windows
- (Improvement) Better handling in get the process output, this fixes processor name not being shown on macOS
- **Windows MSI installer:**
- (Add) UVtools folder to start menu with:
- UVtools
- UVtoolsCmd
- Uninstall UVtools
- (Add) Prompt for add open in UVtools when right-click on supported files
- (Add) Prompt for create desktop shortcut
- (Add) Prompt for launch UVtools after the installation
- (Improvement) Cleanup and simplify the install project
- (Add) PrusaSlicer printer: Peopoly Phenom Forge
- (Upgrade) .NET from 6.0.8 to 6.0.9
- (Fix) Corruption in file after attempt to save to a locked file (#551)
- (Add) UVtools folder to start menu with:
- UVtools
- UVtoolsCmd
- Uninstall UVtools
- (Add) Prompt for add open in UVtools when right-click on supported files
- (Add) Prompt for create desktop shortcut
- (Add) Prompt for launch UVtools after the installation
- (Improvement) Cleanup and simplify the install project
- (Add) Layer action - Export layers to HTML: Export file information and layers to an html file
- (Change) CXDLP: Validate header and footer value must start with "CXSW3D" instead of force equal to "CXSW3DV2" (#501)
- (Upgrade) .NET from 6.0.5 to 6.0.6
- **Tools:**
- (Add) PCB exposure: Converts a gerber file to a pixel perfect image given your printer LCD/resolution to exposure the copper traces.
- (Improvement) Export settings now indent the XML to be more user friendly to edit
- (Improvement) Layer import: Allow to have profiles
- (Improvement) Layer import: Validates if selected files exists before execute
- (Fix) Lithophane: Disallow having start threshold equal to end threshold
- (Add) Windows explorer: Right-click on files will show "Open with UVtools" on context menu which opens the selected file on UVtools (Windows MSI only)
- (Improvement) Island and overhang detection: Ignore detection on all layers that are in direct contact with the plate (On same first layer position)
- (Improvement) Cmd: Better error messages for convert command when using shared extensions and no extension
- **Settings:**
- (Add) Remove source file after automatic conversion (#444)
- (Add) Remove source file after manual conversion (#444)
- (Add) **Average resin bottle cost:** The average cost per one resin bottle of 1000ml.
Used to calculate the material cost when the file lacks that information.
Use 0 to disable this feature and only show the cost if file have that information.
If this value is changed, you need to reload the current file to update the cost.
- (Change) Move "Expand and show tool descriptions by default" to From `General` to `Tools` tab (Setting will reset to default)
- **File formats:**
- (Add) Property `StartingMaterialMilliliters`: Gets the starting material milliliters when the file was loaded
- (Add) Property `StartingMaterialCost`: Gets the starting material cost when the file was loaded
- (Add) Property `MaterialMilliliterCost`: Gets the material cost per one milliliter
- (Improvement) Update `MaterialCost` when `MaterialMilliliters` changes (#449)
- **Raft relief:**
- (Add) Linked lines: Remove the raft, keep supports and link them with lines
- (Improvement) Change the supports detection parameters to be more effective and precise on detect the starting layer
- (Fix) Brightness percentage not getting updated
- (Fix) Remove anti-aliased edges from Tabs
- (Improvement) Core: Minor clean-up
- (Fix) Issue repair error when 'Auto repair layers and issues on file load' is enabled (#446)
- (Fix) UI: Selecting a object with ROI when flip is verically, will cause 1px up-shift on the preview
- (Fix) macOS permission error due loss of attributes on the build script, WSL have bug with mv, using ln&rm instead
- **AnyCubic file format:**
- (Fix) Lift height and speed are not being correctly set on old version, keeping a constant value (#441)
- (Fix) Retract speed getter was not return value from TSMC if using version 516
- **Tool - Infill:**
- (Add) Waves infill type
- (Add) Concentric infill type
- (Add) Gyroid infill type (#443)
- (Change) Increase the default spacing from 200px to 300px
- (Improvement) Fastter infill processing by use the model bounds
- (Add) `FormatSpeedUnit` property to file formats to get the speed unit which the file use internally
- (Fix) UI: ROI rectangle can overlap scroll bars while selecting
- (Fix) Windows auto-upgrade was downloading `.zip` instead of `.msi` (Bug was introduced on v3.1.0). You still need to download v3.1.1 manually in order to get this fix on future releases.
- (Add) Raft relief: Tabs type - Creates tabs around the raft to easily insert a tool under it and detach the raft from build plate
- (Add) Linux AppImage binaries (You won't get them with auto-update, please download AppImage once before can use auto-update feature in the future)
- (Change) Rename "layer compression method" to "layer compression codec", please redefine the codec setting if you changed before
- (Improvement) Linux and macOS releases are now compiled, published and packed under Linux (WSL). Windows release still and must be published under windows.
Tiago Conceição
TheAssassin