* (Improvement) Cache per layer and global used material for faster calculations
* (Improvement) Better internal PrintTime management
* **(Improvement) GUI:**
* Show per layer used material percentage compared to the rest model
* Show total of millimeters cured per layer if available
* Show bounds and ROI in millimeters if available
* Show display width and height below resolution if available
* Don't split (Actions / Refresh / Save) region when resize window and keep those fixed
* **(Improvement) Calibrate - Grayscale:**
* Add a option to convert brightness to exposure time on divisions text
* Adjust text position to be better centered and near from the center within divisions
* (Fix) Calculate the used material with global layer height instead of calculate height from layer difference which lead to wrong values in parallel computation
* (Fix) Converting files were not setting the new file as parent for the layer manager, this affected auto convertions from SL1 and lead to crashes and bad calculations if file were not reloaded from the disk (#150, #151)
* (Fix) PositionZ rounding error when removing layers
* (Add) Computed used material milliliters for each layer, it will dynamic change if pixels are added or subtracted
* (Add) Computed used material milliliters for whole model, it will dynamic change if pixels are added or subtracted
* (Improvement) Round cost, material ml and grams from 2 to 3 decimals
* (Improvement) Operation profiles: Allow to save and get a custom layer range instead of pre-defined ranges
* **(Improvement)** PhotonWorkshop files: (#149)
* Fill in the display width, height and MaxZ values for the printers
* Fill in the xy pixel size values for the printers
* Change ResinType to PriceCurrencyDec and Add PriceCurrencySymbol
* Change Offset1 on header to PrintTime
* Change Offset1 on layer table as NonZeroPixelCount, the number of white pixels on the layer
* Fix LayerPositionZ to calculate the correct value based on each layer height and fix internal layer layer height which was been set to position z
* Force PerLayerOverride to be always 1 after save the file
* (Fix) Actions - Remove and clone layers was selecting all layer range instead of the current layer
* (Fix) Redo last action was not getting back the layer range on some cases
* (Add) Setting: Expand and show tool descriptions by default
* (Improvement) Drag and drop a file on Main Window while hold SHIFT key will open the file under a new instance
* (Improvement) PrusaSlicer & SL1 files: Allow to set custom variables on "Material - Notes" per resin to override the "Printer - Notes" variables
This will allow custom settings per resin, for example, if you want a higher 'lift height, lift speed, etc' on more viscous resins. (#141)
* (Change) Setting: Windows vertical margin to 60px
* (Fix) Export file was getting a "Parameter count mismatch" on some file formats (#140)
* (Fix) photon and cbddlp file formats with version 3 to never hash images
* (Fix) Windows was not geting the screen bounds from the active monitor
* (Fix) Tool windows height, vertical margin and position
* **(Fix) Exposure time finder:**
* Text label
* Set vertical splitter to not show decimals, int value
* Set vertical splitter default to 0
* Allow vertical splitter to accept negative values
* Optimized the default values
* Removed similar letters from text
* Add some symbols to text to validate overexposure
* Decrease Features height minimum value to 0.5mm
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* (Add) Calibrator - Stress Tower: Generates a stress tower to test the printer capabilities
* (Add) PrusaSlicer printer: UVtools Prusa SL1, for SL1 owners must use this profile to be UVtools compatible when using advanced tools
* (Fix) Tool - Calculator - Optimal model tilt: Layer height wasn't get pulled from loaded file and fixed to 0.05mm
* **(Fix) FileFormats:**
* When change a global print paramenter, it will only set this same parameter on every layer, keeping other parameters intact, it was reseting every parameter per layer to globals
* SL1: Verify if files are malformed and if there's missing configuration files (#126)
* CTBv3: Set EncryptionMode to 0x2000000F, this allow the use of per layer settings
* **PrusaSlicer:**
* **In this release is recommended to discard your printer and refresh it with uvtools updated printer or replace notes over**
* (Add) FILEFORMAT_XXX variable to auto-convert to that file format once open in UVtools
* (Update) Print profiles fields with new PrusaSlicer version
* (Remove) LayerOffDelay from printer notes and use only the LightOffDelay variable instead, both were being used, to avoid redundacy LayerOffDelay was dropped. Please update your printer accordingly!
* (Remove) FLIP_XY compability from printers
* (Remove) AntiAlias variable from printers
* **(Add) Settings - Automations:**
* Auto save the file after apply any automation(s)
* Auto convert SL1 files to the target format when possible and load it back
* Auto set the extra 'light-off delay' based on lift height and speed.
* (Add) Allow all and future formats to convert between them without knowing each other (Abstraction)
* (Add) XYResolution and XYResolutionUm property to file formats
* (Add) Calculator - Optimal model tilt: Calculates the optimal model tilt angle for printing and to minimize the visual layer effect
* (Add) Bottom layer count to the status bar
* **(Add) FileFormat propertiers:**
* MirrorDisplay: If images need to be mirrored on lcd to print on the correct orientation (If available)
* MaxPrintHeight: The maximum Z build volume of the printer (If available)
* (Add) ZCodex: Print paramenter light-off delay"
* (Add) SL1: Implement missing keys: host_type, physical_printer_settings_id and support_small_pillar_diameter_percent
* (Change) File formats: Round all setters floats to 2 decimals
* (Change) Island Repair: "Remove Islands Below Equal Pixels" limit from 255 to 65535 (#124)
* (Change) LightOffTime variables to LayerOffDelay
* (Fix) Files with upper case extensions doesn't load in
* **(Fix) SL1:**
* Prevent error when bottle volume is 0
* bool values were incorrectly parsed
* (Fix) **ZIP:**
* Material volume was set to grams
* Bed Y was not being set
* (Add) About box: Primary screen identifier and open on screen identifier
* (Add) Calibrator - External tests
* (Change) Rewrite 'Action - Import Layer(s)' to support file formats and add the followig importation types:
* **Insert:** Insert layers. (Requires images with bounds equal or less than file resolution)
* **Replace:** Replace layers. (Requires images with bounds equal or less than file resolution)
* **Stack:** Stack layers content. (Requires images with bounds equal or less than file resolution)
* **Merge:** Merge/Sum layers content. (Requires images with same resolution)
* **Subtract:** Subtract layers content. (Requires images with same resolution)
* **BitwiseAnd:** Perform a 'bitwise and' operation over layer pixels. (Requires images with same resolution)
* **BitwiseOr:** Perform a 'bitwise or' operation over layer pixels. (Requires images with same resolution)
* **BitwiseXOr:** Perform a 'bitwise xor' operation over layer pixels. (Requires images with same resolution)
* (Change) Icon for Tool - Raft Relief
* (Change) Windows and dialogs max size are now calculated to where window is opened instead of use the primary or first screen all the time
* (Add) Infill: CubicDynamicLink - Alternates centers with lateral links, consume same resin as center linked and make model/infill stronger.
* (Add) Update estimate print time when modify dependent parameters (#103)
* (Add) Tool - Calculator: Old and new print time estimation (#103)
* (Fix) Print time calculation was using normal layers with bottom layer off time
* (Fix) Calculate print time based on each layer setting instead of global settings
* (Add) Tools: Warn where layer preview is critical for use the tool, must disable layer rotation first (#100)
* (Add) CWS: Bottom lift speed property
* (Add) CWS: Support Wanhao Workshop CWX and Wanhao Creation Workshop file types (#98)
* (Add) CWS: Split format into virtual extensions (.cws, .rgb.cws, .xml.cws) to support diferent file formats and diferent printers under same main .cws extensions. That will affect file converts only to let UVtools know what type of encoding to use. Load and save a xxx.cws file will always auto decode/encode the file for the correct target format no matter the extension.
* (Improvement) CWS: It no longer search for a specific filename in the zip file, instead it look for extension to get the files to ensure it always found them no matter the file name system
* (Fix) CWS: When "Save as" the file were generating sub files with .cws extension, eg: filename0001.cws.png
* (Change) Allow read empty layers without error from Anycubic files (PWS, PW0, PWxx) due a bug on slicer software under macOS
* (Add) Changelog description to the new version update dialog
* (Add) Tool - Infill: Proper configurable infills
* (Add) Pixel area as "px²" to the layer bounds and ROI at layer bottom information bar
* (Add) Pixel dimming: Alternate pattern every x layers
* (Add) Pixel dimming: Lattice infill
* (Add) Solidify: Required minimum/maximum area to solidify found areas (Default values will produce the old behaviour)
* (Add) Issues: Allow to hide and ignore selected issues
* (Add) Issue - Touch boundary: Allow to configure Left, Top, Right, Bottom margins in pixels, defaults to 5px (#94)
* (Add) UVJ: Allow convert to another formats (#96)
* (Add) Setters to some internal Core properties for more abstraction
* (Improvement) Issue - Touch boundary: Only check boundary pixels if layer bounds overlap the set margins, otherwise, it will not waste cycles on check individual rows of pixels when not need to
* (Change) Place .ctb extension show first than .cbddlp due more popular this days
* (Change) Pixel dimming: Text "Borders" to "Walls"
* (Change) Issues: Remove "Remove" text from button, keep only the icon to free up space
* (Change) Ungroup extensions on "covert to" menu (#97)
* (Fix) Issues: Detect button has a incorrect "save" icon
* (Fix) SL1: Increase NumSlow property limit
* (Fix) UVJ: not decoding nor showing preview images
* (Fix) "Convert to" menu shows same options than previous loaded file when current file dont support convertions (#96)
* (Fix) Hides "Convert to" menu when unable to convert to another format (#96)
* (Fix) Program crash when demo file is disabled and tries to load a file in
* (Fix) Rare crash on startup when mouse dont move in startup period and user types a key in meanwhile
* (Fix) On a slow startup on progress window it will show "Decoded layers" as default text, changed to "Initializing"
* (Add) Program start elapsed seconds on Log
* (Add) Lift heights @ speeds, retract speed, light-off information to status bar
* (Fix) Per layer settings are being lost when doing operations via tools that changes the layer count
* (Fix) Current layer height mm was being calculated instead of showing the stored position Z value (For hacked files)
* (Fix) Zip: By using hacked gcodes were possible to do a lift sequence without returning back to Z layer position
* (Fix) ZCodex: Read per layer lift height/speed, retract speed and pwm from GCode
* (Fix) Status bar, layer top and bottom bar: Break content down for the next line if window size overlaps the controls
* (Fix) Status bar: Make right buttons same height as left buttons
* (Improvement) CWS: Better gcode parser for decoding
* (Change) GCodes: Cure commands (Light-on/Cure time/Light-off) are only exposed when exposure time and pwm are present and greater than 0 [Safe guard]
* (Change) Zip: If only one G0 command found per layer, it will be associated to the cure z position (No lift height)
* (Change) Merged bottom/normal exposure times on status bar
* (Change) Tabs: Change controls spacing from 5 to 2 for better looking
* (Change) Deploy UVtools self-contained per platform specific: (#89)
* Platform optimized
* Reduced the package size
* Includes .NET Core assemblies and dont require the installation of .NET Core
* Can execute UVtools by double click on "UVtools" file or via ".\UVtools" on terminal
* **Naming:** UVtools_[os]-[architecture]_v[version].zip
* **"universal"** zip file that includes the portable version, os and architecture independent but requires dotnet to run, these build were used in all previous versions
* (Fix) PHZ, PWS, LGS, SL1 and ZCodex per layer settings and implement missing properties on decode
* (Fix) LGS and PHZ Zip wasn't setting the position z per layer
* (Fix) Add missing ctb v3 per layer settings on edit parameters window
* (Fix) PWS per layer settings internal LiftSpeed was calculating in mm/min, changed to mm/sec
* (Add) photons file format (Read-only)
* (Add) Allow mouse scroll wheel on layer slider and issue tracker to change layers (#81)
* (Add) Menu - Help - Open settings folder: To open user settings folder
* (Add) When a file doesn't have a print time field or it's 0, UVtools calculate the approximate time based on parameters
* (Add) Per layer settings override on UVtools layer core
* (Add) Tool - Edit print parameters: Allow change per layer settings on a layer range
* (Add) Tool Window - Layer range synchronization and lock for single layer navigation (Checkbox)
* (Add) Tool Window - Change the start layer index on range will also change the layer image on background
* (Improvement) Adapt every file format to accept per layer settings where possible
* (Improvement) Better gcode checks and per layer settings parses
* (Change) When converting to CTB, version 3 of the file will be used instead of version 2
* (Change) When converting to photon or cbddlp, version 2 of the file will be used instead of version 2
* (Change) New logo, thanks to (Vinicius Silva @photonsters)
* (Fix) MSI installer was creating multiple entries/uninstallers on windows Apps and Features (#79)
* (Fix) Release builder script (CreateRelease.WPF.ps1): Replace backslash with shash for zip releases (#82)
* (Fix) CWS file reader when come from Chitubox (#84)
* (Fix) CWS was introducing a big delay after each layer, LiftHeight was being used 2 times instead of LiftSpeed (#85)
* (Fix) CWS fix Build Direction property name, was lacking a whitespace
* (Fix) Layer bounds was being show for empty layers on 0x0 position with 1px wide
* (Fix) Empty layers caused miscalculation of print volume bounds
* (Fix) Recalculate GCode didn't unlock save button
* (Fix) Tool - Calculator - Light-Off Delay: Wasn't calculating bottom layers
* (Change) Drop a digit from program version for simplicity, now: MAJOR.MINOR.PATCH
* **Major:** new UI, lots of new features, conceptual change, incompatible API changes, etc.
* **Minor:** add functionality in a backwards-compatible manner
* **Patch:** backwards-compatible bug fixes
* (Upgrade) Avalonia framework to preview6
* (Add) Tool - Calculator: Convert millimeters to pixels
* (Add) Tool - Calculator: Find the optimal "Ligth-Off Delay"
* (Add) Internal abstraction of display size to all file formats
* (Add) Default demo file that loads on startup when no file is specified (this can be disable/enabled on settings)
* (Add) Support for PHZ zip files when renamed to .zip
* (Fix) ZIP: Allow to cancel on gather layers stage
* (Fix) ZIP: Thumbnails not showing nor saving
* (Add) Settings & Issues: Enable or disable Empty Layers
* (Add) PrusaSlicer Printer: Nova Bene4 Mono
* (Add) CWS: Support the GRAY2RGB and RBG2GRAY encoding for Bene Mono
* (Add) Layer issue Z map paired with layer navigation tracker bar
* (Change) Shortcuts: + and - to go up and down on layers were change to W and S keys. Reason: + and - are bound to zoom and can lead to problems
* (Upgrade) OpenCV from 4.2 to 4.3
* (Fix) CWS: Add missing Platform X,Y,Z size when converting from SL1
* (Fix) CWS: Invert XY resolution when converting from SL1
* (Add) Layer remove button
* (Add) Tool: Layer removal
* (Add) Layer Repair tool: Remove empty layers
* (Add) Issues: Remove a empty layer will effectively remove the layer
* (Fix) SL1: When converting to other format in some cases the parameters on Printer Notes were not respected nor exported (#12)
* (Fix) Pixel Editor: Draw pixels was painting on wrong positions after apply, when refreshing layer some pixels disappear (Spotted by Nicholas Taylor)
* (Add) PrusaSlicer Printer: Elegoo Mars 2 Pro
* (Add) PrusaSlicer Printer: Creality LD-002H
* (Add) PrusaSlicer Printer: Voxelab Polaris
* (Add) File Format: UVJ (#8)
* (Add) Mutataor: Pixel Dimming
* (Add) Pixel Editor tab with new drawing functions
* (Add) Pixel Editor: Bursh area and shape
* (Add) Pixel Editor: Supports
* (Add) Pixel Editor: Drain holes
* (Add) Settings for pixel editor
* (Add) Setting: File open default directory
* (Add) Setting: File save default directory
* (Add) Setting: File extract default directory
* (Add) Setting: File convert default directory
* (Add) Setting: File save prompt for overwrite (#10)
* (Add) Setting: File save preffix and suffix name
* (Add) Setting: UVtools version to the title bar
* (Improvement) Force same directory as input file on dialogs
* (Improvement) Pattern: Better positioning when not using an anchor, now it's more center friendly
* (Change) Setting: Start maximized defaults to true
* (Fix) Pattern: Calculated volume was appending one margin width/height more
* (Fix) When cancel a file load, some shortcuts can crash the program as it assume file is loaded
* (Fix) pws: Encode using the same count-of-threshold method as CBDDLP (ezrec/uv3dp#79)
* (Add) Allow chitubox, phz, pws, pw0 files convert to cws
* (Add) Allow convert between cbddlp, ctb and photon
* (Add) Allow convert between pws and pw0
* (Improvement) Layers can now have modified heights and independent parameters (#9)
* (Improvement) UVtools now generate better gcode and detect the lack of Lift and same z position and optimize the commands
* (Fix) zcodex: Wasn't reporting layer decoding progress
Tiago Conceição