* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* (Add) Tools: Warn where layer preview is critical for use the tool, must disable layer rotation first (#100)
* (Add) CWS: Bottom lift speed property
* (Add) CWS: Support Wanhao Workshop CWX and Wanhao Creation Workshop file types (#98)
* (Add) CWS: Split format into virtual extensions (.cws, .rgb.cws, .xml.cws) to support diferent file formats and diferent printers under same main .cws extensions. That will affect file converts only to let UVtools know what type of encoding to use. Load and save a xxx.cws file will always auto decode/encode the file for the correct target format no matter the extension.
* (Improvement) CWS: It no longer search for a specific filename in the zip file, instead it look for extension to get the files to ensure it always found them no matter the file name system
* (Fix) CWS: When "Save as" the file were generating sub files with .cws extension, eg: filename0001.cws.png
* (Change) Allow read empty layers without error from Anycubic files (PWS, PW0, PWxx) due a bug on slicer software under macOS
* (Add) RAM usage on title bar
* (Add) Clipboard manager: Undo (Ctrl + Z) and Redo (Ctrl + Y) modifications (Memory optimized)
* (Add) Current layer properties on information tab
* (Fix) Long windows with system zoom bigger than 100% were being hidden and overflow (#90)
* (Fix) Do not recompute issues nor properties nor reshow layer if operation is cancelled or failed
* (Add) Auto-updater: When a new version is detected UVtools still show the same green button at top,
on click, it will prompt for auto or manual update.
On Linux and Mac the script will kill all UVtools instances and auto-upgrade.
On Windows the user must close all instances and continue with the shown MSI installation
* (Add) Tool profiles: Create and remove named presets for some tools
* (Add) Event handler for handling non-UI thread exceptions
* (Fix) Mac: File - Open in a new window was not working
* (Fix) Tool - Rotate: Allow negative angles
* (Fix) Tool - Rotate: The operation was inverting the angle
* (Fix) Tools: Select normal layers can crash the program with small files with low layer count, eg: 3 layers total
* (Add) Tools can now run inside a ROI (#49)
* (Add) Layer preview: Hold-Shift + Left-drag to select an ROI (Region of interest) on image, that region will be used instead of whole image when running some tools
* (Add) Layer preview: Hold-Shift + Hold-Alt + Left-drag to select and auto adjust the ROI to the contained objects, that region will be used instead of whole image when running some tools
* (Add) Layer preview: Hold-Shift + Right-click on a object to select its bounding area, that region will be used instead of whole image when running some tools
* (Add) Layer preview: ESC key to clear ROI
* (Add) Layer preview: Overlay text with hints for current action
* (Add) Tool - Move: Now possible to do a copy move instead of a cut move
* (Add) Arrow wait cursor to progress loadings
* (Change) Layer preview: Hold-Shift key to select issues and pick pixel position/brightness changed to Hold-Control key
* (Change) Layer preview: Shift+click combination to zoom-in changed to Alt+click
* (Fix) CTB v3: Bad file when re-encoding
Mostly text updates, with a few adjustments
to dialog box layouts or controls.
Presets for Threshold, for example, where changed
from buttons to a combobox selections.
Allowed the line splits added by Designer to remain, but
did fix any mid-word breaks.
* (Add) PrusaSlicer Printer: Elegoo Mars 2 Pro
* (Add) PrusaSlicer Printer: Creality LD-002H
* (Add) PrusaSlicer Printer: Voxelab Polaris
* (Add) File Format: UVJ (#8)
* (Add) Mutataor: Pixel Dimming
* (Add) Pixel Editor tab with new drawing functions
* (Add) Pixel Editor: Bursh area and shape
* (Add) Pixel Editor: Supports
* (Add) Pixel Editor: Drain holes
* (Add) Settings for pixel editor
* (Add) Setting: File open default directory
* (Add) Setting: File save default directory
* (Add) Setting: File extract default directory
* (Add) Setting: File convert default directory
* (Add) Setting: File save prompt for overwrite (#10)
* (Add) Setting: File save preffix and suffix name
* (Add) Setting: UVtools version to the title bar
* (Improvement) Force same directory as input file on dialogs
* (Improvement) Pattern: Better positioning when not using an anchor, now it's more center friendly
* (Change) Setting: Start maximized defaults to true
* (Fix) Pattern: Calculated volume was appending one margin width/height more
* (Fix) When cancel a file load, some shortcuts can crash the program as it assume file is loaded
* (Fix) pws: Encode using the same count-of-threshold method as CBDDLP (ezrec/uv3dp#79)
* (Add) Allow chitubox, phz, pws, pw0 files convert to cws
* (Add) Allow convert between cbddlp, ctb and photon
* (Add) Allow convert between pws and pw0
* (Improvement) Layers can now have modified heights and independent parameters (#9)
* (Improvement) UVtools now generate better gcode and detect the lack of Lift and same z position and optimize the commands
* (Fix) zcodex: Wasn't reporting layer decoding progress
Tiago Conceição
Bryce Yancey