* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* **PrusaSlicer:**
* **In this release is recommended to discard your printer and refresh it with uvtools updated printer or replace notes over**
* (Add) FILEFORMAT_XXX variable to auto-convert to that file format once open in UVtools
* (Update) Print profiles fields with new PrusaSlicer version
* (Remove) LayerOffDelay from printer notes and use only the LightOffDelay variable instead, both were being used, to avoid redundacy LayerOffDelay was dropped. Please update your printer accordingly!
* (Remove) FLIP_XY compability from printers
* (Remove) AntiAlias variable from printers
* **(Add) Settings - Automations:**
* Auto save the file after apply any automation(s)
* Auto convert SL1 files to the target format when possible and load it back
* Auto set the extra 'light-off delay' based on lift height and speed.
* (Add) Allow all and future formats to convert between them without knowing each other (Abstraction)
* (Add) XYResolution and XYResolutionUm property to file formats
* (Add) Calculator - Optimal model tilt: Calculates the optimal model tilt angle for printing and to minimize the visual layer effect
* (Add) Bottom layer count to the status bar
* **(Add) FileFormat propertiers:**
* MirrorDisplay: If images need to be mirrored on lcd to print on the correct orientation (If available)
* MaxPrintHeight: The maximum Z build volume of the printer (If available)
* (Add) ZCodex: Print paramenter light-off delay"
* (Add) SL1: Implement missing keys: host_type, physical_printer_settings_id and support_small_pillar_diameter_percent
* (Change) File formats: Round all setters floats to 2 decimals
* (Change) Island Repair: "Remove Islands Below Equal Pixels" limit from 255 to 65535 (#124)
* (Change) LightOffTime variables to LayerOffDelay
* (Fix) Files with upper case extensions doesn't load in
* **(Fix) SL1:**
* Prevent error when bottle volume is 0
* bool values were incorrectly parsed
* (Fix) **ZIP:**
* Material volume was set to grams
* Bed Y was not being set
* (Add) Tool - Calculator: Convert millimeters to pixels
* (Add) Tool - Calculator: Find the optimal "Ligth-Off Delay"
* (Add) Internal abstraction of display size to all file formats
* (Add) Default demo file that loads on startup when no file is specified (this can be disable/enabled on settings)
* (Add) Partial update islands from current working layer and next layer when using pixel editor or island remove
* (Add) Setting: To enable or disable partial update islands
* (Change) Properties, Issues, Pixel Editor: ListView upgraded to a FastObjectListView, resulting in faster renders, sorting capabilities, column order, groups with counter, selection, hot tracking, filtering and empty list message
* (Change) Log: ObjectListView upgraded to a FastObjectListView
* (Change) Bunch of icons
Tiago Conceição