- **Pixel Arithmetic:**
- (Add) Corode: Noise pixel area, defaulting to 3px2
- (Change) Corode: Cryptonumeric random to normal random to speed up calculation
- (Change) Fuzzy skin preset: Set a ignore threshold area of 5000px2
- (Improvement) Masking performance and auto crop the layer to speed up the processing when using an "Apply to" other than "All"
- (Fix) Some "Apply to" methods was creating a wrong mask with some operators
- **CXDLP V3:**
- (Fix) Checksum (CRC32) (#389)
- (Fix) Software name and material name serialization
- **Tool - Morph:**
- (Add) Operator: White tophat - Removes small isolated pixels and only return its affected pixels (Image - Noise removal)
- (Add) Operator: Black tophat - Closes small holes inside the objects and only return its affected pixels (Gap closing - Image)
- (Add) Operator: Hit or miss - Finds pixels in a given kernel pattern
- (Remove) Operator: 'Isolate features' as that is the same as the 'White tophat' and is already inbuilt into OpenCV
- **Kernels:**
- (Add) Option: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Add) Kernels are now saved with the operation profile
- **PrusaSlicer:**
- (Add) Support to slice files to be converted for encrypted CTB format
- (Add) Printer: Elegoo Mars 3 (#370)
- (Add) Printer: EPAX E10 5K
- (Add) Printer: EPAX X10 5K
- (Add) Printer: Phrozen Sonic Mini 8K
- (Add) Printer: Phrozen Sonic Mega 8K
- (Fix) Printer: AnyCubic Photon Mono 4K - display size (#369)
- (Fix) Printer: AnyCubic Photon Mono X 6K - display size (#369)
- (Add) Tool - Double exposure: Kernel configuration
- (Add) Tool - Pixel arithmetic: Kernel configuration
- (Add) Calibration - Elephant foot: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Fix) Calibrate - Elephant foot: Redo (Ctrl + Z) the operation was crashing the application
- (Fix) CTB, PHZ, FDG: Converting files with a null machine name would cause a exception
- (Fix) Anycubic files: Bottom lift and speed were showing default values instead of real used value
- **File - Send to:**
- (Add) Icons to distinguish each send type
- (Add) Allow to configure processes to open the file with (#352)
- (Improvement) CXDLP: When encoding the file, only attempt to change the machine name if not starts with 'CL-' (#351)
- (Improvement) UI: Remove the "0/?" and just show the title on the progress bar
- (Change) CTBv4: Remove the following validation to be compatible with lychee and CTB SDK: "Malformed file, PrintParametersV4 found invalid validation values, expected (4, 4) got (x, y)" (#354)
- **Change resolution:**
- (Add) Presets: 5K UHD, 6K and 8K UHD
- (Add) Resulting pixel ratio information
- (Add) Fix the pixel ratio by resize the layers images with the proposed ratio to match the new resolution
- (Fix) New images could have noise when processed on linux and macos
- (Add) Layer slider debounce time to render the image [Configurable] (#343)
- (Fix) CTB v1: Incorrect getter for the LightOffDelay
- (Fix) Reallocating layers were not notifying nor updating the layer collection about the changes, leading to wrong layer count
- (Fix) Undo and redo now also reverts the file resolution when changed
- **File formats:**
- (Add) Allow to partial open the files for read and/or change properties, the layer images won't be read nor cached (Fast)
- (Add) More abstraction on partial save
- **Scripting:**
- (Add) ScriptOpenFolderDialogInput - Selects a folder path
- (Add) ScriptOpenFileDialogInput - Selectes a file to open
- (Add) ScriptSaveFileDialogInput - Selects a file to save
- (Add) [UNSAVED] tag to the title bar when there are unsaved changes on the current session
- (Improvement) Better handling of empty images on the UI
- **File -> Send to -> Device**
- (Add) Progress with the transfered megabyte(s) and allow to cancel the transfer
- (Add) It will prompt for drive ejection [Configurable - On by default] [Windows only] (#340)
- (Add) Option to enable/disable bottom text on 'pattern model' mode
- (Fix) Importing a profile with 'Pattern loaded model' enabled, will trigger an error and prevent the import
- (Add) Export layers to heatmap: Mirror and rotate options
- (Improvement) Export layers to image, GIF and heatmap: Auto select the flip method based on sliced file mirror information, it will output images in thier original form/orientation
(Add) Morph Tools - Added Isolate Features option - retains features
such as thin walls and remove other material. Useful for composing/
merging after applying other effects e.g. to restore strength to thin
walls, corners, etc.
- **Pixel arithmetic**
- (Add) Apply to - Model surface: Apply only to model surface/visible pixels
- (Add) Apply to - Model surface & inset: Apply only to model surface/visible pixels and within a inset from walls
- (Add) Preset: Fuzy skin
- (Improvement) Speed up the Corrode method
- (Change) Heal anti-aliasing threshold from 169 to 119
- **Calibration - Grayscale:**
- (Add) Enable or disable text
- (Fix) Calibration - Grayscale: Crash program when redo (Ctrl+Z)
- (Change) Some defaults to better values
- (Fix) Layer arithmetic: Crash program when redo (Ctrl+Z)
- (Add) Apply to - Model surface: Apply only to model surface/visible pixels
- (Add) Apply to - Model surface & inset: Apply only to model surface/visible pixels and within a inset from walls
- (Improvement) Speed up the Corrode apply method
- **Pixel arithmetic**
- (Add) Corrode: Random dithering, use for eliminating visual prominence of layer lines. Can also be used to add a microtexture to enhance paint bonding (#307)
- (Add) Ignore areas smaller or larger than an threshold
- (Add) Preset - Heal anti-aliasing: Discard uncured faded pixels and turn them into solid black (0)
- (Fix) Resin traps: Discard traps with drain holes directly on first layer / build plate
- (Fix) The setting 'Auto flip layer on file load' is not respected when off
Added switch to random offset as it smooths the diffusion service by
leveraging grey values.
Added UI, preserves void option duplicates the "model only" option but
is significantly faster as it avoid the calculation for void voxels.
Incorporated crypto random and using spans for array access based on PR feedback.
Add pixel arithmetic operation to randomly remove pixels based on
intensity. The random dithering significantly reduces layers lines and
also provides an excellent bonding surface for paints. Intial
implementation is a primitive PoC.
- **Issues:**
- (Add) Suction cups: Additional setting to specify the required minimum height to be flagged as a issue (#302)
- (Change) Allow touching bounds to have a bounding rectangle and zoom into the issue
- (Change) Disable the ability to copy issues row text from list as this is crashing the program
- (Change) Decrease cache count of the layers from x10 to x5 to free RAM
- (Fix) Touching bounds are reporting areas of 0
- (Fix) Draw crosshair for issues are called multiple times
- (Fix) Detection error when resin traps are enabled on some cases (#303)
- (Fix) Resin trap false-positives (#305)
- (Fix) When removing multiple islands at once only the first is cleared from the issue list
- **UI:**
- (Change) Tool - Resize icon
- (Change) Move "Crosshairs" button inside "Issues" button
- (Add) Tool - Morph - Offset crop: Like erode but discards the outer pixels
- (Fix) Corrected bottom lift unit label in light-off delay calculator (#304)
Both the repair operation as well as the deletion of an issue will now leverage common code for executing a repair. Repair operation will repair all suction cups, and deleting a specific suction cup will only repair that one.
- Issues:
- (Add) Suction cups: Add a auto repair feature for this issues by drill a vertical vent hole (#296)
- (Add) Layer issue track bar: Colorize the issue tracker map with it own colors (Configurable)
- (Add) Allow to group issues by type and/or layer
- (Improvement) Order issues by area in descending order
- (Improvement) Always bring the selected issue into view on the list
- (Fix) When manually removing a issue from the list, it will no longer reselect other and make the user lost track of the remove issue
- (Fix) Allow to ignore all issue type
- (Fix) Material ml calculation was calculating a bad value for PhotonWorkshop files
This commit removes the Parent/Child issue structures that were added to Issue, and instead opts for a more lean approach to determining the layers affected by an operation. Instead of building out the entire parent/child tree for ever single suction cup issue, we know only calculate what we need when we need it.
During a repair operation, we calculate only the suction cup issues that have no overlapping suction cup issue below it. For "delete issue" behavior we only calculate the suction cup issues that overlap the selected on in both directions (following that direction until no more overlaps are found).
Currently disabled by default, this needs a corresponding UI component to toggle on/off, as well as a configuration setting for the size of the hole to drill.
Tiago Conceição
tslater2006
Finn Neuik