- **File formats:**
- (Add) OSF (Vlare Open File Format)
- (Fix) CTB Encrypted: Bottom Retract Height for TSMC was constraining incorrectly with the normal total retract height
- (Fix) CWS: Only issue `;<Slice>` command when the exposure is about to happen (#514)
- **GCode:**
- (Add) Command `CommandWaitSyncDelay` for movement wait sync delay instead of depending on G4 wait command
- (Fix) Wrong parsing and set of wait times when using a wait after lift / wait before retract
- (Improvement) Auto update: Make sure the download url exists before attempt the download, if not, instead it will prompt for manual download and update
- (Improvement) MacOS: Remove `com.apple.quarantine` flag from the auto downloaded files
- (Upgrade) .NET from 6.0.7 to 6.0.8
- (Upgrade) AvaloniaUI from 0.10.17 to 0.10.18
- **File formats:**
- (Add) `LayerImageType`: Gets the layer image data type used on this file format
- (Improvement) jxs, rgb.cws and xml.cws: Improve the layer image read/write performance by a significant amount
- (Fix) xml.cws: Wanhao printers need 32 bit png instead of 8 bit png (#514)
- **AnyCubic file format:**
- (Fix) Lift height and speed are not being correctly set on old version, keeping a constant value (#441)
- (Fix) Retract speed getter was not return value from TSMC if using version 516
- **Tool - Infill:**
- (Add) Waves infill type
- (Add) Concentric infill type
- (Add) Gyroid infill type (#443)
- (Change) Increase the default spacing from 200px to 300px
- (Improvement) Fastter infill processing by use the model bounds
- (Add) `FormatSpeedUnit` property to file formats to get the speed unit which the file use internally
- (Fix) UI: ROI rectangle can overlap scroll bars while selecting
- **Core:**
- (Add) Machine presets and able to load machine collection from PrusaSlicer
- (Improvement) Core: Reference EmguCV runtimes into core instead of the UI project
- **File formats:**
- **CXDLP:**
- (Add) Detection support for Halot One Pro
- (Add) Detection support for Halot One Plus
- (Add) Detection support for Halot Sky Plus
- (Add) Detection support for Halot Lite
- (Improvement) Better handling and detection of printer model when converting
- (Improvement) Discovered more fields meanings on format
- (Fix) Exposure time in format is `round(time * 10, 1)`
- (Fix) Speeds in format are in mm/s, was using mm/min before
- (Add) JXS format for Uniformation GKone [Zip+GCode]
- (Improvement) Saving and converting files now handle the file backup on Core instead on the UI, which prevents scripts and other projects lose the original file in case of error while saving
- (Fix) After load files they was flagged as requiring a full encode, preventing fast save a fresh file
- **UVtoolsCmd:**
- Bring back the commandline project
- Consult README to see the available commands and syntax
- Old terminal commands on UVtools still works for now, but consider switch to UVtoolsCmd or redirect the command using `UVtools --cmd "commands"`
- **Tools:**
- **Change print resolution:**
- (Add) Allow to change the display size to match the new printer
- (Add) Machine presets to help set both resolution and display size to a correct printer and auto set fix pixel ratio
- (Improvement) Real pixel pitch fixer due new display size information, this allow full transfers between different printers "without" invalidating the model size
- (Improvement) Better arrangement of the layout
- (Add) Infill: Option "Reinforce infill if possible", it was always on before, now default is off and configurable
- (Improvement) Always allow to export settings from tools
- **GCode:**
- (Improvement) After print the last layer, do one lift with the same layer settings before attempt a fast move to top
- (Improvement) Use the highest defined speed to send the build plate to top after finish print
- (Improvement) Append a wait sync command in the end of gcode if needed
- (Fix) When lift without a retract it still output the motor sync delay for the retract time and the wait time after retract
- **PrusaSlicer:**
- (Add) Printer: Creality Halot One Pro CL-70
- (Add) Printer: Creality Halot One Plus CL-79
- (Add) Printer: Creality Halot Sky Plus CL-92
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality CT133 Pro
- (Add) Printer: Creality CT-005 Pro
- (Add) Printer: Uniformation GKone
- (Add) Printer: FlashForge Foto 8.9S
- (Add) Printer: Elegoo Mars 2
- (Improvement) Rename all Creality printers
- (Fix) Creality model in print notes
Tiago Conceição