- **UI:**
- (Improvement) Layer navigation load time by parallel `Mat` to `Bitmap` conversion
- (Improvement) Allow to show exceptions without the stack trace and detailed trigger action by using the `MessageExceiption` (#644)
- (Improvement) Allow progress to have and display a detailed log (#644)
- (Improvement) Convert format to another with multiple versions will now only show the possible versions for the extension
- **Suggestion - Wait time before cure:**
- (Improvement) Set the first wait time based on first valid layer mass rather than use the fixed limit
- (Improvement) Set zero time to empty and dummy layers
- (Improvement) When creating the dummy layer also increment the bottom layer count as the created layer count as one
- **PCB Exposure:**
- (Add) Excellon Drill Format (drl) to cut off holes (Implementation may lack some advanced features, please confirm the result) (#646)
- (Fix) Arc (G03) with negative offsets (I-/J-) was not drawing the shape correctly
- (Fix) Implement the rotation for the outline primitive (#645)
- **File formats:**
- (Improvement) Formats now sanitize the selected version before encode given the file extension, if version is out of range it will force the last known version
- (Fix) CBDDLP: Remove a table from the file that might cause layer corruption
- (Add) Operations - `AfterCompleteReport` property: Gets or sets an report to show to the user after complete the operation with success
- (Improvement) Suggestion - Wait time after cure: Set zero time to empty and dummy layers
- (Improvement) Slight improvement on the contour intersection check, yields better performance on resin and suction cup detection
- (Improvement) Allow to trigger message boxes from operations and scripts (#644)
- (Upgrade) .NET from 6.0.12 to 6.0.13
- (Add) File format: Anet N7 (#635)
- (Add) PrusaSlicer Printer: Anet N7 (#635)
- (Improvement) Each layer can now be aware of it own resolution
- (Improvement) Better set of file resolution from layers when using a compression codec other than png
- (Fix) Anet N4 printer reset on latest firmware (#633)
- (Fix) PrusaSlicer printers: Change thumbnails resolution to match file preview resolution (Fix stretch images)
- **File formats:**
- (Add) OSF (Vlare Open File Format)
- (Fix) CTB Encrypted: Bottom Retract Height for TSMC was constraining incorrectly with the normal total retract height
- (Fix) CWS: Only issue `;<Slice>` command when the exposure is about to happen (#514)
- **GCode:**
- (Add) Command `CommandWaitSyncDelay` for movement wait sync delay instead of depending on G4 wait command
- (Fix) Wrong parsing and set of wait times when using a wait after lift / wait before retract
- (Improvement) Auto update: Make sure the download url exists before attempt the download, if not, instead it will prompt for manual download and update
- (Improvement) MacOS: Remove `com.apple.quarantine` flag from the auto downloaded files
- (Upgrade) .NET from 6.0.7 to 6.0.8
- (Upgrade) AvaloniaUI from 0.10.17 to 0.10.18
- **Tools**
- **PCB Exposure:**
- (Add) Able to choose the size midpoint rounding method (#520)
- (Fix) Allow to flash alone D03 commands (#520)
- (Fix) Correct line thickness to have at least 1px error (#523)
- (Improvement) Layer arithmetic: Use ; to split and start a new arithmetic operation
- (Add) Cmd: Convert command now allow to pass 'auto' as target type to auto convert specific files, valid for SL1 files configured with FILEFORMAT_xxx (#522)
- (Add) GCode: Command to sync and wait for movement completion [Only enabled for cws format] (#514)
- (Add) VDT: Transition layer count
- (Upgrade) AvaloniaUI from 0.10.16 to 0.10.17
- **Core:**
- (Add) Machine presets and able to load machine collection from PrusaSlicer
- (Improvement) Core: Reference EmguCV runtimes into core instead of the UI project
- **File formats:**
- **CXDLP:**
- (Add) Detection support for Halot One Pro
- (Add) Detection support for Halot One Plus
- (Add) Detection support for Halot Sky Plus
- (Add) Detection support for Halot Lite
- (Improvement) Better handling and detection of printer model when converting
- (Improvement) Discovered more fields meanings on format
- (Fix) Exposure time in format is `round(time * 10, 1)`
- (Fix) Speeds in format are in mm/s, was using mm/min before
- (Add) JXS format for Uniformation GKone [Zip+GCode]
- (Improvement) Saving and converting files now handle the file backup on Core instead on the UI, which prevents scripts and other projects lose the original file in case of error while saving
- (Fix) After load files they was flagged as requiring a full encode, preventing fast save a fresh file
- **UVtoolsCmd:**
- Bring back the commandline project
- Consult README to see the available commands and syntax
- Old terminal commands on UVtools still works for now, but consider switch to UVtoolsCmd or redirect the command using `UVtools --cmd "commands"`
- **Tools:**
- **Change print resolution:**
- (Add) Allow to change the display size to match the new printer
- (Add) Machine presets to help set both resolution and display size to a correct printer and auto set fix pixel ratio
- (Improvement) Real pixel pitch fixer due new display size information, this allow full transfers between different printers "without" invalidating the model size
- (Improvement) Better arrangement of the layout
- (Add) Infill: Option "Reinforce infill if possible", it was always on before, now default is off and configurable
- (Improvement) Always allow to export settings from tools
- **GCode:**
- (Improvement) After print the last layer, do one lift with the same layer settings before attempt a fast move to top
- (Improvement) Use the highest defined speed to send the build plate to top after finish print
- (Improvement) Append a wait sync command in the end of gcode if needed
- (Fix) When lift without a retract it still output the motor sync delay for the retract time and the wait time after retract
- **PrusaSlicer:**
- (Add) Printer: Creality Halot One Pro CL-70
- (Add) Printer: Creality Halot One Plus CL-79
- (Add) Printer: Creality Halot Sky Plus CL-92
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality CT133 Pro
- (Add) Printer: Creality CT-005 Pro
- (Add) Printer: Uniformation GKone
- (Add) Printer: FlashForge Foto 8.9S
- (Add) Printer: Elegoo Mars 2
- (Improvement) Rename all Creality printers
- (Fix) Creality model in print notes
- **Benchmark:**
- (Add) PNG, GZip, Deflate and LZ4 compress tests
- (Change) Test against a known image instead of random noise
- (Change) Single-thread tests from 100 to 200 and multi-thread tests from 1000 to 5000
- (Improvement) Same image instance is shared between tests instead of create new per test
- (Fix) Encode typo
- **Core:**
- (Add) Layer compression method: Allow to choose the compression method for layer image
- **PNG:** Compression=High Speed=Slow (Use with low RAM)
- **GZip:** Compression=Medium Speed=Medium (Optimal)
- **Deflate:** Compression=Medium Speed=Medium (Optimal)
- **LZ4:** Compression=Low Speed=Fast (Use with high RAM)
- (Improvement) Better handling on cancel operations and more immediate response
- (Fix) Extract: Zip Slip Vulnerability (CWE-22)
- **File formats:**
- (Improvement) Better handling of encode/decoding layers from zip files
- (Fix) ZCode: Canceling the file load can trigger an error
- (Fix) VDA: Unable to open vda zip files
- **Tools:**
- (Improvement) Allow operations to be aware of ROI and Masks before execution (#436)
- (Improvement) Scripting: Allow save and load profiles (#436)
- (Fix) Adjust layer height: When using the Offset type the last layer in the range was not taken in account (#435)
- **UI:**
- (Improvement) Allow layer zoom levels of 0.1x and 64x but constrain minimum zoom to the level of image fit
- (Improvement) Update change log now shows with markdown style and more readable
- (Fix) Windows MSI upgrade to this version (#432)
- (Fix) Auto-updater for Mac ARM, was downloading x64 instead
- **(Add) Suggestions:**
- A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
- **Avaliable suggestions:**
- **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
- **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
- **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
- **Layer height:** Using the right layer height is important to get successful prints:
Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
- Convert the project to Nullable aware and "null-safe"
- **File Formats:**
- (Add) `Volume` property to get the total model volume
- (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
- (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
If using scripts please update them, search for `.LayerManager.` and replace by `.`
- (Change) Chitubox encrypted format can now be saved as normal
- (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
- (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
- (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
- (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
- (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
- (Improvement) Convert scripts to use Nullable code
- **UI:**
- (Add) Fluent Dark theme
- (Add) Default Light theme
- (Add) Default Dark theme
- (Change) Use fontawesome and material design to render the icons instead of static png images
- (Change) Some icons
- (Change) Move log tab to clipboard tab
- (Change) Tooltip overlay default color
- (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
- (Fix) Center image icon for layer action button
- (Fix) Center image icon for save layer image button
- **Tools:**
- (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
- (Improvement) Rotate: Unable to use an angle of 0
- (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
- (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
- (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
- (Add) More default namespaces
- (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
- (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
- This brings big performance improvements, better JIT, faster I/O operations and others
- Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
- Due this macOS requirement starts at 10.15 (Catalina)
- Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
- **Core:**
- (Add) Utilities methods (`MinimumSpeed`, `MaximumSpeed`, `CreateMat`, `CreateMatWithDummyPixel`, `FileFormat.CopyParameters`)
- (Improvement) Issues - Print Height: Group all layers outside the valid print height
- **FileFormats:**
- (Add) Generic / Phrozen ZIP format
- (Add) Information/modifier to file formats to tell whatever is possible to use custom PositionZ per layer
- (Add) Safe checks in order to run some tools, related to the previous "PositionZ" point
- (Improvement) if blank, allow the previous layer to have a higher Z position than the successor layer
- (Improvement) SL1: Implement the missing keys from new features of PrusaSlicer 2.4.0
- (Fix) Calling a partial save action without a progress instance would cause a crash
- (Fix) GCode: Unable to parse the "Wait time after lift" when a second lift (TSMC) was present, leading to a sum on "Wait time before cure"
- **Tools:**
- (Add) Timelapse: Raise the build platform to a set position every odd-even height to be able to take a photo and create a time-lapse video of the print
- (Add) Scripting: ScriptToggleSwitchInput
- **Raise on print finish:**
- (Add) Reapply check and prevent run the tool in that case
- (Fix) It was incorrectly marked to be able to run in partial mode
- (Fix) The dummy pixel was beeing set to a wrong location
- **Layers:**:
- (Change) When set Wait times to a negative value, it will set the global wait time value accordingly
- (Change) Allow ExposureTime to be 0
- **Commandline arguments**
- (Add) --run-operation \<input_file\> \<operation_file.uvtop\>
- (Add) --run-script \<input_file\> \<script_file.cs\>
- (Add) --copy-parameters \<from_file\> \<to_file\>
- **UI:**
- (Add) When open a file with missing crucial information, prompt the user to fill in that information (Optional)
- (Add) Warn user about misfunction when open a file with invalid layer height of 0mm
- (Improvement) Layer information: Only show the "Exposure time" when its availiable on the file format
- (Improvement) When a file is about to get auto-converted once loaded and the output file already exists, prompt user for overwrite action
- (Improvement) Set default culture info at top most of the program to avoid strange problems with commandline arguments
- (Upgrade) .NET from 5.0.13 to 5.0.14
- (Downgrade) OpenCV from 4.5.5 to 4.5.4 due the crash while detecting islands (Linux and MacOS) (#411, #415, #416)
- **UI:**
- (Add) When converting file formats with multiple available versions, it will prompt to select the version to use
- (Add) Remove CTBv4 from convert menu (Will require readjust settings for default extension if you are using an below extension) (#286)
- (Change) Rename CTBv3 to CTB on the convert menu
- (Fix) CXDLP: Set version 3 was setting wrong information
- **(Core) Layer:**
- (Add) Property: IsFirstLayer - Gets if is the first layer
- (Add) Property: IsIntermediateLayer - Gets if layer is between first and last layer, aka, not first nor last layer
- (Add) Property: IsLastLayer - Gets if is the last layer
- (Rename) Property: RelativeLayerHeight to RelativePositionZ
- **VDT:**
- (Add) Keyword 'FILEFORMAT_xxx' to allow set the file format to auto convertion on machine notes
- (Add) Keyword 'FILEVERSION_n' to allow set the file format version/revision on machine notes
- **Tool - Morph:**
- (Add) Operator: White tophat - Removes small isolated pixels and only return its affected pixels (Image - Noise removal)
- (Add) Operator: Black tophat - Closes small holes inside the objects and only return its affected pixels (Gap closing - Image)
- (Add) Operator: Hit or miss - Finds pixels in a given kernel pattern
- (Remove) Operator: 'Isolate features' as that is the same as the 'White tophat' and is already inbuilt into OpenCV
- **Kernels:**
- (Add) Option: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Add) Kernels are now saved with the operation profile
- **PrusaSlicer:**
- (Add) Support to slice files to be converted for encrypted CTB format
- (Add) Printer: Elegoo Mars 3 (#370)
- (Add) Printer: EPAX E10 5K
- (Add) Printer: EPAX X10 5K
- (Add) Printer: Phrozen Sonic Mini 8K
- (Add) Printer: Phrozen Sonic Mega 8K
- (Fix) Printer: AnyCubic Photon Mono 4K - display size (#369)
- (Fix) Printer: AnyCubic Photon Mono X 6K - display size (#369)
- (Add) Tool - Double exposure: Kernel configuration
- (Add) Tool - Pixel arithmetic: Kernel configuration
- (Add) Calibration - Elephant foot: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Fix) Calibrate - Elephant foot: Redo (Ctrl + Z) the operation was crashing the application
- (Fix) CTB, PHZ, FDG: Converting files with a null machine name would cause a exception
- (Fix) Anycubic files: Bottom lift and speed were showing default values instead of real used value
- **File formats:**
- (Add) Allow to partial open the files for read and/or change properties, the layer images won't be read nor cached (Fast)
- (Add) More abstraction on partial save
- **Scripting:**
- (Add) ScriptOpenFolderDialogInput - Selects a folder path
- (Add) ScriptOpenFileDialogInput - Selectes a file to open
- (Add) ScriptSaveFileDialogInput - Selects a file to save
- (Add) [UNSAVED] tag to the title bar when there are unsaved changes on the current session
- (Improvement) Better handling of empty images on the UI
- Issues:
- (Add) Suction cups: Add a auto repair feature for this issues by drill a vertical vent hole (#296)
- (Add) Layer issue track bar: Colorize the issue tracker map with it own colors (Configurable)
- (Add) Allow to group issues by type and/or layer
- (Improvement) Order issues by area in descending order
- (Improvement) Always bring the selected issue into view on the list
- (Fix) When manually removing a issue from the list, it will no longer reselect other and make the user lost track of the remove issue
- (Fix) Allow to ignore all issue type
- (Fix) Material ml calculation was calculating a bad value for PhotonWorkshop files
- **File Formats:**
- (Fix) Setting a global property that haven't a bottom counter-part will notify and set that value to bottom layers too
- (Fix) TSMC: Update lift or retract height for the first time will set the `RetractHeight2` property to 0
- (Fix) TSMC: `RetractHeight` is the first fast sequence paired with `RetractSpeed`
- (Fix) TSMC: `RetractHeight2` paired with `RetractSpeed2` is performed after the `RetractHeight` and controls the height to retract to the next layer position (The slow stage)
- (Improvement) When converting from a TSMC enabled to a TSMC unable file, the slowest retract speed will be enforced
- **Layer:**
- (Add) `Number` property to get the layer number, 1 started
- (Fix) `HaveGlobalParameters` property was not comparing the `PositionZ` resulting in `true` when different heights are used but keeping all other settings the same
- (Fix) `HaveGlobalParameters` property was not comparing the `WaitTimeAfterCure` for bottom layers
- (Fix) `MaterialMilliliters` calculation with the real layer height instead of global information and recalculate when height changes (#266)
- **CTB:**
- (Improvement) Discovered more unknown fields and set them accordingly
- (Improvement) When all layers share same settings as globals it will set to follow global table instead of per layer settings
- (Fix) VDT: Wrong binding to json 'retract_distance2' key
- (Fix) XYZ Accuracy: 'Total height' text showing a F3 and no decimals
- **File formats:**
- Add and remove some image types that can be open
- (Add) `CanProcess` method to know if a file can be read under a format and to allow diferent formats with same extension
- (Fix) `LiftHeightTotal` and `RetractHeight` was rounding to no decimals and returning wrong values
- (Improvement) Round all float setters on `Layer` class
- (Improvement) Decode/encode RAM usage and performance by processing in batch groups
- **Pixel Dimming:** (#262)
- (Add) Option "Lightening pixels" to add brightness/lightening instead of dimming/subtract pixels
- (Fix) "Dim walls only" would reset body brightness by increase pixel brightness two times it value
- **Pixel Arithmetic:**
- (Change) Transpose "Pixel Dimming" to "Pixel Arithmetic"
- (Improvement) New options and manipulations
- **(Fix) Exposure time finder:**
- Generate top staircase based on selected measure (px or mm)
- Zebra bars when used in mm measures, it was using X density instead Y to calculate the thickness
- Move 'Unit of measure' to 'Object configuration'
- Custom text with wrong Y position when using out of portion resolutions/LCDs
- **CTBv4:**
- (Fix) More Unknown fields discovered and implemented
- (Fix) Reserved table is 384 bytes instead of 420
- (Fix) When full encoding it was forcing to change to version 3. This also affected convertions. (#263)
- (Fix) `BottomRetractHeight2` was being set to `BottomRetractSpeed2`
- (Fix) `RetractHeight2` was being set to `RetracSpeed2`
- (Fix) The PrintParametersV4 table address
- (Fix) Generates invalid files to open with Chitubox and printers (#263)
- (Fix) Better progress report
- **(Add) PrusaSlicer printer notes variables:**
- BottomLiftHeight2
- BottomLiftSpeed2
- LiftHeight2
- LiftSpeed2
- BottomRetractSpeed
- BottomRetractSpeed2
- BottomRetractHeight2
- BottomRetractSpeed2
- RetractHeight2
- RetractSpeed2
- **UI:**
- (Add) File - Open current file folder (Ctrl+Shift+L): Locate and open the folder that contain the current loaded file
- (Improvement) Hide some virtual extensions from file open dialog filters
- (Improvement) UI: Refresh active thumbnail when changed
- (Change) Icon for File - Open and Open in a new file
- (Change) Rename File - Extract to: Extract file contents
- (Upgrade) AvaloniaUI from 0.10.6 to 0.10.7
- (Fix) PW0, PWM, PWMX, PWMO, PWMS: Unable to decode some files with AntiAliasing (#143)
- **Command line arguments:**
- (Add) Convert files: UVtools.exe -c \<inputfile\> \<outputfile1/ext1\> [outputfile2/ext2]
- (Add) Extract files: UVtools.exe -e \<inputfile\> [output_folder]
- https://github.com/sn4k3/UVtools#command-line-arguments
- **File formats:**
- (Add) Implement TSMC (Two Stage Motor Control) for the supported formats
- (Add) Implement 'Bottom retract speed' for the supported formats
- (Add) LGS: Support for lgs120 and lg4k (#218)
- (Add) CTB: Special/virtual file extensions .v2.ctb, .v3.ctb, .v4.ctb to force a convertion to the set version (2 to 4). The .ctb is Version 3 by default when creating/converting files
- (Improvement) Better performance for file formats that decode images in sequential pixels groups
- **GCode:**
- (Improvement) Better parsing of the movements / lifts
- (Improvement) Better handling of lifts performed after cure the layer
- (Improvement) More fail-safe checks and sanitize of gcode while parsing
- (Improvement) CTBv3: Enable per layer settings if disabled when fast save without reencode
- (Upgrade) .NET from 5.0.8 to 5.0.9
- (Fix) PrusaSlicer printer: Longer Orange 4k with correct resolution and display size
- (Fix) Odd error when changing properties too fast in multi-thread
- **Windows MSI:**
- (Fix) Use the folder programs x64 instead of x86 for new installation path (#254)
- (Improvement) Mark program and all files as x64
- (Improvement) Add UVtools logo to side panel and top banner
- (Improvement) Add open-source logo to side panel
- (Improvement) License text aligment and bold title
- (Add) File format: OSLA / ODLP / OMSLA - Universal binary file format
- (Add) Calibration - Lift height: Generates test models with various strategies and increments to measure the optimal lift height or peel forces for layers given the printed area
- (Add) Layer Actions - Export layers to images (PNG, JPG/JPEG, JP2, TIF/TIFF, BMP, PBM, PGM, SR/RAS and SVG)
- (Add) About box: License with link
- (Add) Include a copy of the LICENSE on the packages
- (Improvement) File formats: Implement `Wait time before cure` properties on file formats with light-off delay, when used it will calculate the right light-off delay with that extra time and set to `LightOffDelay` property
- (Improvement) Change all date times to Utc instead of local
- (Fix) Tool - Flip: 'Both' were not working correctly
- (Fix) Linux: File 'UVtools.sh' with incorrect line break type, changed to \n (#258)
- **File formats:**
- (Add) Wait time before cure: The time to rest/wait in seconds before cure a new layer
- (Add) Wait time before after: The time to rest/wait in seconds after cure a new layer
- (Add) Wait time after lift: The time to rest/wait in seconds after a lift/peel move
- (Change) All gcode file formats dropped light-off delay field in favor of new 'Wait time before cure' field, setting light-off delay still valid but it redirects to the new field
- (Change) Reorder 'Light-off delay' before 'Exposure time'
- (Improvement) Recalculate the print time when a related property changes
- (Fix) Generic time estimation calculation was ignoring exposure times
- (Fix) Unable to load files with uppercase extensions
- (Fix) ZIP: Use G1 at end of gcode instead of G0
- (Fix) CWS: Use G1 for movements
- **(Fix) CXDLP:** (#240)
- Layer area calculation
- Validation checksum
- **(Fix) ZCODE:**
- Use G1 at end of gcode instead of G0 to prevent crash to top bug on firmware
- Put back the M18 motors off at end of gcode
- **GCode Builder/Parser:**
- (Add) Allow to choose between G0 and G1 for layer movements and end gcode
- (Fix) Safe guard: If the total print height is larger than set machine Z, do not raise/lower print on completeness
- (Fix) Light-off delay is the real delay time and not the calculated movement of the lifts plus the extra time
- (Improvement) Parse gcode line by line instead searching on a group of layers to allow a better control and identification
- **Tools:**
- **Change print parameters:**
- (Add) Tooltips to labels
- (Add) Sun UTF-8 to the Light PWM value unit to describe intensity
- (Improvement) Dynamic lifts: Round lift height and speed to 1 decimal
- (Fix) Exposure time finder: Time estimation when using 'Use different settings for layers with same Z positioning'
- **Prusa Slicer:**
- (Add) Note keyword: BottomWaitBeforeCure_xxx
- (Add) Note keyword: WaitBeforeCure_xxx
- (Add) Note keyword: BottomWaitAfterCure_xxx
- (Add) Note keyword: WaitAfterCure_xxx
- (Add) Note keyword: BottomWaitAfterLift_xxx
- (Add) Note keyword: WaitAfterLift_xxx
- (Change) Uniz IBEE: Remove light-off delay and implement wait time keywords
- **macOS:** (#236)
- (Remove) osx legacy packages from build and downloads
- (Fix) macOS: Simplify the libcvextern.dylib and remove libtesseract dependency
- (Fix) macOS: Include libusb-1.0.0.dylib
- Note: `brew install libusb` still required
- **UI:**
- (Fix) Refresh gcode does not update text on UI for ZIP, CWS, ZCODEX files
- (Fix) Operations: Import a .uvtop file by drag and drop into the UI would not load the layer range
- (Change) When convert a file, the result dialog will have Yes, No and Cancel actions, where No will open the converted file on current window, while Cancel will not perform any action (The old No behaviour)
- (Upgrade) EmguCV from 4.5.1 to 4.5.2
- **File formats:**
- (Add) Getter `IsAntiAliasingEmulated`: Gets whatever a file format uses real or emulated AntiAliasing
- (Add) Getter `IsDisplayPortrait`: Gets if the display is in portrait mode
- (Add) Getter `IsDisplayLandscape`: Gets if the display is in landscape mode
- **Tool - Resize:** (#235)
- (Fix) Division by 0 when start layer is equal to end layer
- (Fix) Calculations when using the option "Increase or decrease towards 100%"
- (Add) About window: OpenCV build number and a button to copy build information to clipboard
- (Improvement) Exposure exposure finder: Improve the **Multiple brightness** section to auto fill with correct values for file formats that use time fractions to emulate AntiAliasing, this can be used to replace the **Multiple exposures** section
- (Fix) UVJ: Error when using a null or empty layer array on manifest `config.json` file (#232)
- (Fix) GCode parser: When only a G4/wait command is present on a layer it was setting the global exposure time and discard the this value per layer
- (Upgrade) AvaloniaUI from 0.10.4 to 0.10.5
- (Improvement) VDT: Implement a new key for better auto convert files between with latest version of Tango
- (Change) Exposure time finder: Bar fence offset from 2px to 4px
- **Exposure time finder:**
- Add a enable option for each feature
- Add a staircase: Creates an incremental stair at top from left to right that goes up to the top layer
- Add a section dedicated to the bullseye and revamp the design
- Add a section for counter triangles (this will take the space of the old bullseye)
- Allow negative fence offset for zebra bars
- Allow to preview the exposure time information
- Changed some defaults
- (Add) Layer actions - Export layers to animated GIF
- **Note:** Non Windows users must install 'libgdiplus' dependency in order to use this tool
- (Add) Tools - Dynamic lifts: Generate dynamic lift height and speeds for each layer given it mass
- (Improvement) File formats using json files are now saved with human readable indentation
- (Fix) GCode builder: Raise to top on completion command was not being sent when feedrate units are in mm/min
- (Fix) Tools - Layer Range Selector: Fix the 'to layer' minimum to not allow negative values and limit to 0
* **File formats:**
* PhotonS: Implement the write/encode method to allow to use this format and fix the thumbnail
* VDT: Allow to auto convert the .vdt to the target printer format using the Machine - Notes, using a flag: FILEFORMAT_YourPrinterExtension, for example: FILEFORMAT_CTB
* (Fix) Unable to convert files with no thumbnails to other file format that requires thumbnails
* **Tools:**
* (Add) Re-height: Option to Anti-Aliasing layers
* (Fix) Morph and Blur: The combobox was not setting to the selected item when preform a redo operation (Ctrl+Shift+Z)
* **GUI:**
* (Change) Progress window to be a grid element inside MainWindow, this allow to reuse the graphics and its elements without the need of spawning a Window instance everytime a progress is shown, resulting in better performance and more fluid transaction
* (Improvement) Clear issues when generating calibration tests
* **File formats:**
* Add Voxeldance Tango (VDT)
* Add Makerbase MKS-DLP (MDLPv1)
* Add GR1 Workshop (GR1)
* Add Creality CXDLP (CXDLP)
* When decoding a file and have a empty resolution (Width: 0 or Height: 0) it will auto fix it by get and set the first layer image resolution to the file
* Fix when decoding a file it was already set to require a full encode, preventing fast saves on print parameters edits
* **GUI:**
* When file resolution dismatch from layer resolution, it is now possible to auto fix it by set the layer resolution to the file
* When loading a file with auto scan for issues disabled it will force auto scan for issues types that are instant to check (print height and empty layers), if any exists it will auto select issues tab
* **(Add) PrusaSlicer printers:**
* Creality HALOT-SKY CL-89
* Creality HALOT-SKY CL-60
* (Improvement) Tool - Adjust layer height: Improve the performance when multiplying layers / go with higher layer height
* (Fix) PrusaSlicer Printer - Wanhao D7: Change the auto convertion format from .zip to .xml.cws
Tiago Conceição