- **File formats:**
- (Add) Property: DisplayTotalOnTime
- (Add) Property: DisplayTotalOffTime
- (Add) SL1File Property: high_viscosity_tilt_time
- **Tools**
- **I printed this file**
- (Add) Display on time for the print information
- (Improvement) Labels on numeric box
- (Improvement) Show print time label formatted as hh:mm:ss
- **PCB Exposure:**
- (Improvement) Increase "Exposure time" maximum from 200s to 1000s (#592)
- (Fix) Set `BottomLightHeight` to 0
- (Fix) Set `TransitionLayerCount` to 0
- **Issues:**
- (Improvement) Overhang detection by using a dynamic cross kernel
- (Improvement) Bring back the discard logic of "false-positive" islands based on overhang detection but improve the threshold of the detection to be safer (#591, #591)
- **PrusaSlicer:**
- (Change) Elegoo Mars 2 to use file version 4
- (Change) Elegoo Mars 2 Pro to use file version 4
- (Add) Status bar: On and Off time (hh:mm:ss) as tooltip in the Print time label
- (Improvement) When any of libcvextern dependencies are missing, it try to show the missing libraries in the error message (Linux only)
- (Improvement) Auto-upgrade procedure for non-Windows systems
- (Improvement) macOS arm64 (M1/M2) can now run natively if installed via the auto installer script
- (Fix) Error on Mat cache manager when file have only one layer
- (Fix) Suggestion "Transition layer count" shows as never applied when using with file formats that use in-firmware transition layers
- (Upgrade) openCV from 4.5.4 to 4.6.0
- Custom library is now built to strip unused dependencies and reduce library size
- (Remove) arch and rhel packages in favor of a generic linux
- **Shortcuts:**
- (Add) **Delete:** While on layer preview and with roi or mask(s) selected, will remove the selected area from layer
- (Add) **Alt + Delete:** While on layer preview and with roi or mask(s) selected, will remove the selected area from all layers
- (Add) **Ctrl + Delete:** While on layer preview, will remove the current layer
- (Add) **Insert:** While on layer preview and with roi or mask(s) selected, will keep only the selected area in layer
- (Add) **Alt + Insert:** While on layer preview and with roi or mask(s) selected, will keep only the selected area in all layers
- (Add) **Ctrl + Insert:** While on layer preview, will clone the current layer
- (Add) **Home:** While on layer preview will go to first layer
- (Add) **End:** While on layer preview will go to last layer
- (Add) **Page up:** While on layer preview will skip +10 layers
- (Add) **Page down:** While on layer preview will skip -10 layers
- (Add) Tool - Lithophane: Generate lithophane from a picture
- (Fix) Pixel arithmetic: When run with masks it produce a incorrect outcome
- (Fix) CXDLP: Layer area table miscalculation, causing slow down prints
- **Core:**
- (Add) Machine presets and able to load machine collection from PrusaSlicer
- (Improvement) Core: Reference EmguCV runtimes into core instead of the UI project
- **File formats:**
- **CXDLP:**
- (Add) Detection support for Halot One Pro
- (Add) Detection support for Halot One Plus
- (Add) Detection support for Halot Sky Plus
- (Add) Detection support for Halot Lite
- (Improvement) Better handling and detection of printer model when converting
- (Improvement) Discovered more fields meanings on format
- (Fix) Exposure time in format is `round(time * 10, 1)`
- (Fix) Speeds in format are in mm/s, was using mm/min before
- (Add) JXS format for Uniformation GKone [Zip+GCode]
- (Improvement) Saving and converting files now handle the file backup on Core instead on the UI, which prevents scripts and other projects lose the original file in case of error while saving
- (Fix) After load files they was flagged as requiring a full encode, preventing fast save a fresh file
- **UVtoolsCmd:**
- Bring back the commandline project
- Consult README to see the available commands and syntax
- Old terminal commands on UVtools still works for now, but consider switch to UVtoolsCmd or redirect the command using `UVtools --cmd "commands"`
- **Tools:**
- **Change print resolution:**
- (Add) Allow to change the display size to match the new printer
- (Add) Machine presets to help set both resolution and display size to a correct printer and auto set fix pixel ratio
- (Improvement) Real pixel pitch fixer due new display size information, this allow full transfers between different printers "without" invalidating the model size
- (Improvement) Better arrangement of the layout
- (Add) Infill: Option "Reinforce infill if possible", it was always on before, now default is off and configurable
- (Improvement) Always allow to export settings from tools
- **GCode:**
- (Improvement) After print the last layer, do one lift with the same layer settings before attempt a fast move to top
- (Improvement) Use the highest defined speed to send the build plate to top after finish print
- (Improvement) Append a wait sync command in the end of gcode if needed
- (Fix) When lift without a retract it still output the motor sync delay for the retract time and the wait time after retract
- **PrusaSlicer:**
- (Add) Printer: Creality Halot One Pro CL-70
- (Add) Printer: Creality Halot One Plus CL-79
- (Add) Printer: Creality Halot Sky Plus CL-92
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality CT133 Pro
- (Add) Printer: Creality CT-005 Pro
- (Add) Printer: Uniformation GKone
- (Add) Printer: FlashForge Foto 8.9S
- (Add) Printer: Elegoo Mars 2
- (Improvement) Rename all Creality printers
- (Fix) Creality model in print notes
- **(Add) Suggestions:**
- A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
- **Avaliable suggestions:**
- **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
- **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
- **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
- **Layer height:** Using the right layer height is important to get successful prints:
Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
- Convert the project to Nullable aware and "null-safe"
- **File Formats:**
- (Add) `Volume` property to get the total model volume
- (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
- (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
If using scripts please update them, search for `.LayerManager.` and replace by `.`
- (Change) Chitubox encrypted format can now be saved as normal
- (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
- (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
- (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
- (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
- (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
- (Improvement) Convert scripts to use Nullable code
- **UI:**
- (Add) Fluent Dark theme
- (Add) Default Light theme
- (Add) Default Dark theme
- (Change) Use fontawesome and material design to render the icons instead of static png images
- (Change) Some icons
- (Change) Move log tab to clipboard tab
- (Change) Tooltip overlay default color
- (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
- (Fix) Center image icon for layer action button
- (Fix) Center image icon for save layer image button
- **Tools:**
- (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
- (Improvement) Rotate: Unable to use an angle of 0
- (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
- (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
- (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
- (Add) More default namespaces
- (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
- (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
- This brings big performance improvements, better JIT, faster I/O operations and others
- Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
- Due this macOS requirement starts at 10.15 (Catalina)
- Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
Tiago Conceição