- (Change) `Layer.IsBottomLayer` no longer calculate the value using the position of the layer, a new property `IsBottomLayerByHeight` is now used to get that result
- (Improvement) Tool - Double exposure: Increase the bottom layer count per cloned bottom layer
- (Improvement) Calibration - Exposure time finder: Set the absolute bottom layer count accordingly when also testing for bottom time
- (Improvement) Goo: Enforce Wait times or Light-off-delay flag based on property set
- (Fix) AnyCubic and Goo: `PerLayerSetting` flag was set inverted causing printer not to follow layer settings when it should and also the otherwise (#689)
- (Fix) Tool - Scripting: Prevent from reload UI multiple times when using profiles (#694)
- (Improvement) Increase `PixelSize`, `PixelWdith` and `PixelHeight` precision from 3 to 4 decimals (#684)
- (Improvement) Suggestion wait time before/after cure: When unable to set time per layer and/or per bottom and normal layers it will show a simpler message with just one time that it can apply
- (Fix) Unable to apply the wait time before cure suggestion in some formats due incorrectly check for the wait time after cure availability (#686)
- (Improvement) CXDLP: Better parse of machine model from PrusaSlicer profile (#351)
- (Fix) OSF: Printer freezes at first layer (#657)
- (Upgrade) AvaloniaUI from 0.10.18 to 0.10.19
- **File formats:**
- (Improvement) Does not set `PerLayerSettings` flag when found different exposure times on transition layers, this fix the issue where users can't edit settings on printer menu when having transition layers (#507)
- (Fix) CTB for UniFormation GKtwo: Unable to show nor print files (#673)
- (Fix) CBDDLP corruption when downgrade version (#675)
- **PCB exposure:**
- (Add) EagleCAD XLN drill format (#676)
- (Add) Allow to re-order gerbers up and down on the grid
- (Change) Drill files does not require G05 to do the holes (#676)
- (Fix) Infinite loop on refresh preview when selecting drl files
- (Fix) Unable to individual invert drl files
- (Upgrade) .NET from 6.0.14 to 6.0.15
- (Add) Allow to pause and resume operations (#654)
- (Add) `Layer.FirstTransitionLayer`
- (Add) `Layer.LastTransitionLayer`
- (Add) File format: Elegoo GOO
- (Add) PrusaSlicer Printer: Elegoo Mars 4
- (Improvement) Allocate maximum GPU memory for Skia up to 256 MB
- (Improvement) Set and sanitize transition layers exposure time from last bottom layer and first normal layer instead of global times (#659)
- (Change) CXDLP: Default version from 2 to 3
- (Fix) UI was not rendering with GPU (ANGLE)
- (Fix) `Layer.IsTransitionLayer` was returning the wrong value
- (Upgrade) .NET from 6.0.13 to 6.0.14
- (Improvement) Remove developer machine path in PDB / error messages
- (Fix) HoneyComb infill not going to the right most edge of the image (#649)
- (Fix) AnyCubic machine names were not showing in most files
- (Fix) PWMX: Unable to set version 1
- (Fix) LGS: Converted files to lgs cause program to crash with `Value was either too large or too small for a Decimal` (#653)
- **UI:**
- (Improvement) Layer navigation load time by parallel `Mat` to `Bitmap` conversion
- (Improvement) Allow to show exceptions without the stack trace and detailed trigger action by using the `MessageExceiption` (#644)
- (Improvement) Allow progress to have and display a detailed log (#644)
- (Improvement) Convert format to another with multiple versions will now only show the possible versions for the extension
- **Suggestion - Wait time before cure:**
- (Improvement) Set the first wait time based on first valid layer mass rather than use the fixed limit
- (Improvement) Set zero time to empty and dummy layers
- (Improvement) When creating the dummy layer also increment the bottom layer count as the created layer count as one
- **PCB Exposure:**
- (Add) Excellon Drill Format (drl) to cut off holes (Implementation may lack some advanced features, please confirm the result) (#646)
- (Fix) Arc (G03) with negative offsets (I-/J-) was not drawing the shape correctly
- (Fix) Implement the rotation for the outline primitive (#645)
- **File formats:**
- (Improvement) Formats now sanitize the selected version before encode given the file extension, if version is out of range it will force the last known version
- (Fix) CBDDLP: Remove a table from the file that might cause layer corruption
- (Add) Operations - `AfterCompleteReport` property: Gets or sets an report to show to the user after complete the operation with success
- (Improvement) Suggestion - Wait time after cure: Set zero time to empty and dummy layers
- (Improvement) Slight improvement on the contour intersection check, yields better performance on resin and suction cup detection
- (Improvement) Allow to trigger message boxes from operations and scripts (#644)
- (Upgrade) .NET from 6.0.12 to 6.0.13
- (Add) File format: Anet N7 (#635)
- (Add) PrusaSlicer Printer: Anet N7 (#635)
- (Improvement) Each layer can now be aware of it own resolution
- (Improvement) Better set of file resolution from layers when using a compression codec other than png
- (Fix) Anet N4 printer reset on latest firmware (#633)
- (Fix) PrusaSlicer printers: Change thumbnails resolution to match file preview resolution (Fix stretch images)
- **CTB:**
- (Improvement) Split `uint PerLayerSettings` into `byte AntiAliasFlag`, `ushort Padding` and `byte PerLayerSettings`
- (Improvement) Change the way and value set to `PerLayerSettings`, this may fix some recent problems where printer doesn't respect per layer settings?
- **Issues:**
- (Fix) Resin traps and suction cups area sum, was losing precision due uint cast (#621)
- (Fix) Overhang area was incorrectly showing bounding rectangle area instead it real area
- (Fix) OSF: Unable to open certain files when using anti-aliasing
- (Upgrade) .NET from 6.0.11 to 6.0.12
- **Dynamic lifts:**
- (Improvement) Remove the 'light-off delay' set logic as it is now better integrated on 'Wait time before cure' suggestion and should run/applied there if intended
- (Fix) Prevent set NaN values to lift height and/or speed
- (Fix) Lift height and speed for the current layer must be calculated from previous layer (#618)
- (Improvement) Windows auto-updater will install the update without dialogs, just displaying installation progress
- **File formats:**
- (Add) File extension: .gktwo.ctb to `ChituboxFile` to be able to convert files for UniFormation GKtwo under special CTB format
- (Add) UniFormation GKtwo compatibility under CTB format, if exporting JXS rename to CTB before open
- (Fix) CTB, CBDDLP, PHOTON, FDG, PHZ: Read and write files larger then 4GB (#608)
- **PCB Exposure:**
- (Add) Offset X/Y to offset the PCB from it origin
- (Add) Allow to toggle between "Show preview image cropped by it bounds" and "Show full preview image (The final result)"
- (Improvement) Use rectangle instead of line for center line primitive (#607)
- (Fix) Implement rotation to polygon and center line primitives (#607)
- (Fix) Macros in a single line was not being parsed (#607)
- (Fix) Invert color per file was not affecting primitives
- **Network printers:**
- (Add) Socket requests with TCP and UDP
- (Add) AnyCubic printer preset (However it can't upload a file)
- (Add) Scripts in request path to allow a first request to fetch data to the final request:
- A script starts with **<\?** and ends with **?>**
- First parameter is the first request to get response content from
- Second parameter is the regex pattern to match content with
- Third parameter is the final request that supports a parameter from regex matching group, eg: **{#1}** is match Group[1] value
- **Example:** <\? getfiles > {0}\/(\d+\.[\da-zA-Z]+), > printfile,{#1} ?>
- (Change) Allow to print a filename without send it when upload request path is empty
- (Fix) Do not show printers with empty requests
- (Change) Default layer compression to Lz4 instead of Png
- (Improvement) Application is now culture aware but set part of `NumberFormat` to the `InvariantCulture.NumberFormat`
- (Improvement) Material cost now show with the current culture currency symbol due previous change
- (Improvement) Better submit of bug reports using sections and forms
- (Improvement) Linux: AppImage now have a help manual with possible arguments and parameters
- (Improvement) macOS: Codesign app on auto-installer and auto-upgrade to bypass arm64 run restriction (#431)
- (Improvement) macOS: Rebuilt arm64 libcvextern.dylib to run with less dependencies (#431)
- (Improvement) macOS: Try to show missing dependencies from openCV (if any) on the error message
- (Fix) UI: layers sorted lexicographically instead of numerically in the issues list view (#611)
- (Fix) PrusaSlicer printer parameters: UniFormation GKtwo
- **UVtoolsCmd:**
- **print-properties:**
- (Change) `-b`, `--base` option to `-a`, `-all` to indicate all properties and sub-properties, now defaults to only show base properties
- (Add) `-r`, `--range` option to prints only the matching layer(s) index(es) in a range
- (Add) `-i`, `--indexes` option to prints only the matching layer(s) index(es)
- (Add) Command: `set-properties <input-file> <property=value> Set properties in a file or to it layers with new values`
- (Add) Command: `print-issues <input-file> Detect and print issues in a file`
- (Add) New option to the `run` command: `-p, --property <property=value> Set a property with a new value (Compatible with operations only)`
- (Remove) Command: `print-layers` as it has been moved to `print-properties`, use `-r :` to obtain same result as default on `print-layers`
- **Issues:**
- (Fix) Issues groups with only one issue was displaying the wrong area value
- (Fix) Volume incorrectly calculated, resulting in a high value for group of issues
- (Fix) Incorrect calculation of the bounding rectangle for a group of issues
- **Repair layers:**
- (Add) Switch to opt between "Re-detect the selected issues before repair" and "Use and repair the previous detected issues" (Default)
- (Improvement) Do not allow to run the tool if there are no detected issues when the option "Use and repair the previous detected issues" is selected
- (Improvement) Linux: Recompile libcvextern.so on a older system to be able to run on both older and newest system (#603)
- (Upgrade) .NET from 6.0.10 to 6.0.11
- **Import thumbnails:**
- (Add) Import from file
- (Add) Import from file (Replace all)
- (Add) Import from current layer
- (Add) Import from current layer (Replace all)
- (Add) Import from random layer
- (Add) Import from random layer (Replace all)
- (Add) Import from heatmap
- (Add) Import from heatmap (Replace all)
- (Fix) Import from file could load in any image color type, resulting in wrong encoding on file save
- **Auto-upgrade script:** (Will only take effect on the next release)
- (Improvement) Add some marker/debug messages
- (Improvement) On generic Linux and macOS try to rename the folder if contain the version on it name to the upgraded version name
- (Improvement) Linux AppImage upgrades now renames to UVtools.AppImage
- (Improvement) Re-open the program with the current loaded file
- (Add) UVtoolsCmd: `set-preview, set-thumbnail <input-file> <file path|layer index|:random-layer|:heatmap> Sets and replace thumbnail(s) in the file [default: :heatmap]`. (#599)
Use `UVtoolsCmd set-preview -?` to view the full documentation
- (Improvement) Export layers to mesh: Write the file to a temporary location and move it to the target location when complete with success
- (Fix) Error when opening a file with light calculated issues that cause a complete issue detection and when there are auto applied suggestions that modify the layer count (#598)
- (Fix) Auto applying suggestions was not triggering a UI properties refresh, causing some values to show outdated
- (Fix) PCB exposure: Bad parsing of macros when the ending `%` is alone in a new line (#600)
- **Tools:**
- **PCB Exposure:**
- (Add) Allow to scale the drawing sizes per gerber file
- (Add) Allow to invert the drawing polarity per gerber file (#592)
- (Add) Allow to drag and drop files into "Add files" button and grid header
- (Improvement) Do not add empty layers when usable to draw or when draw a all black image
- (Improvement) "Merge all gerbers into one layer" will now draw all gerber into one image instead of perform the Max(of all gerbers pixels), allowing to subtract areas as they are on gerbers
- **Import layers:** Fix error when trying to insert layers
- **Export layers images:** Better compression of contours for SVG export, resulting in smooth curves, better visuals and lower file size
- (Add) Outline: Triangulate
- (Remove) Avalonia.Diagnostics dependency in release mode
- **File formats:**
- (Add) Property: DisplayTotalOnTime
- (Add) Property: DisplayTotalOffTime
- (Add) SL1File Property: high_viscosity_tilt_time
- **Tools**
- **I printed this file**
- (Add) Display on time for the print information
- (Improvement) Labels on numeric box
- (Improvement) Show print time label formatted as hh:mm:ss
- **PCB Exposure:**
- (Improvement) Increase "Exposure time" maximum from 200s to 1000s (#592)
- (Fix) Set `BottomLightHeight` to 0
- (Fix) Set `TransitionLayerCount` to 0
- **Issues:**
- (Improvement) Overhang detection by using a dynamic cross kernel
- (Improvement) Bring back the discard logic of "false-positive" islands based on overhang detection but improve the threshold of the detection to be safer (#591, #591)
- **PrusaSlicer:**
- (Change) Elegoo Mars 2 to use file version 4
- (Change) Elegoo Mars 2 Pro to use file version 4
- (Add) Status bar: On and Off time (hh:mm:ss) as tooltip in the Print time label
- (Improvement) When any of libcvextern dependencies are missing, it try to show the missing libraries in the error message (Linux only)
- (Improvement) Auto-upgrade procedure for non-Windows systems
- (Improvement) macOS arm64 (M1/M2) can now run natively if installed via the auto installer script
- (Fix) Error on Mat cache manager when file have only one layer
- (Fix) Suggestion "Transition layer count" shows as never applied when using with file formats that use in-firmware transition layers
- (Upgrade) openCV from 4.5.4 to 4.6.0
- Custom library is now built to strip unused dependencies and reduce library size
- (Remove) arch and rhel packages in favor of a generic linux
- **File formats:**
- (Add) AnyCubic PM3R (#587)
- (Add) AnyCubic PMX2
- (Fix) LGS: `LightOffDelay` is `WaitTimeBeforeCure` in this format
- **PrusaSlicer printer:**
- (Add) AnyCubic Photon M3 Premium
- (Add) AnyCubic Photon Mono X2
- (Fix) Scripting: Unable to use sub-classes (#583)
- (Fix) Loading an image as file cause application to crash
- (Fix) "File - Send to" doesn't ignore case on file extension names resulting in ignore files in a uppercase even if extension is correct
- (Fix) Do not show layer material milliliters when value is 0 or the percentage is NaN
- (Fix) Auto-upgrade on Linux with AppImage integrated on system causes the file name to grow with hash strings
- **File formats:**
- (Add) `TransitionLayerCount` modifier to: Chitubox Zip, CWS, JXS, OSLA, PW*, UVJ, ZCodex, ZCode
- (Add) Utility methods for transition layers calculation/parse
- (Improvement) Calculate and set `TransitionLayerCount` property in file decode based on layer exposure time configuration
- **GCode:**
- (Improvement) GCode: Able to parse layer image file with appended numbers on the filename (Afecting CWS) (#577)
- (Fix) Bad parsing of the file when it comes from Lychee or NovaMaker slicer (Afecting CWS)
- (Fix) Incorrect parse of "Wait time before cure" from layers when printer require wait sync moves (Afecting CWS)
- **Tools:**
- (Add) External tests: The Complete Resin 3D Printing Settings Guide for Beginners
- (Add) External tests: 9 settings for faster printing
- (Improvement) Fade exposure time: Set `TransitionLayerCount` property with the affected layer count
- **Suggestions:**
- (Add) Transition layers: If you are printing flat on the build plate your model will print better when using a smooth transition exposure time instead of a harsh variation, resulting in reduced layer line effect and avoid possible problems due the large exposure difference.
This is not so important when your model print raised under a raft/supports unaffected by the bottom exposure, in that case, it's fine to ignore this.
- (Add) Model position: Printing on a corner will reduce the FEP stretch forces when detaching from the model during a lift sequence, benefits are: Reduced lift height and faster printing, less stretch, less FEP marks, better FEP lifespan, easier to peel, less prone to failure and use the screen pixels more evenly.
If the model is too large to fit within the margin(s) on the screen, it will attempt to center it on that same axis to avoid touching on screen edge(s) and to give a sane margin from it.
- **Status bar:**
- (Add) Transition layers: 0/-0.00s
- (Improvement) Change "Layer Height: 0.000mm" to "Layers: count @ 0.000mm"
- (Improvement) Change "Bottom layers: 0" to "Bottom layers: 0/0.000mm"
- (Change) Show user informative message about CTB Encrypted file format once per ten file loads
- (Upgrade) .NET from 6.0.9 to 6.0.10
- (Fix) Windows MSI installation not upgrading well when downgrade libraries
- **Layer:**
- (Add) Property: `LayerMatBoundingRectangle`
- (Add) Property: `LayerMatModelBoundingRectangle`
- (Add) Method: `GetLayerMat(roi)`
- **Issues:**
- **Islands:**
- (Improvement) Islands detection performance
- (Improvement) Required area to consider an island is now real area instead of bounding box area
- (Fix) Logic bug when combining with overhangs
- **Overhangs:**
- (Improvement) Overhangs detection performance
- (Improvement) Overhangs are now split and identified as separately in the layer
- (Improvement) Overhangs now shows the correct issue area and able to locate the problem region more precisely
- (Improvement) Compress overhangs into contours instead of using whole pixels, resulting in better render performance and less memory to hold the issue
- (Fix) Bug in overhang logic causing to detect the problem twice when combined with supports
- (Improvement) Touching bounds check logic to spare cycles
- **Tool - Raise platform on print finish:**
- (Add) Preset "Minimum": Sets to the minimum position
- (Add) Preset "Medium": Sets to half-way between minimum and maximum position
- (Add) Preset "Maximum": Sets to the maximum position
- (Add) Wait time: Sets the ensured wait time to stay still on the desired position.
This is useful if the printer firmware always move to top and you want to stay still on the set position for at least the desired time.
Note: The print time calculation will take this wait into consideration and display a longer print time.
- (Add) FileFormat: AnyCubic custom machine (.pwc)
- (Downgrade) OpenCV from 4.5.5 to 4.5.4 due a possible crash while detecting islands (Windows)
- **UI:**
- (Improvement) Auto show a horizontal scroll bar on wider than screen contents on the tool windows
- (Improvement) Move normal windows to zero position if negative and auto constrain height if necessary
- (Improvement) Set a minimum width and minimum height for tool windows
- (Fix) Setting - "Allow resize the tool windows" had been lost and no effect when checked
- (Add) Windows MSI - Option: Add installation directory to system PATH environment variable
- (Improvement) Better fetch of UVtools.Core.dll on PowerShell scripts under Windows
- (Improvement) Better handling in get the process output, this fixes processor name not being shown on macOS
- **Windows MSI installer:**
- (Add) UVtools folder to start menu with:
- UVtools
- UVtoolsCmd
- Uninstall UVtools
- (Add) Prompt for add open in UVtools when right-click on supported files
- (Add) Prompt for create desktop shortcut
- (Add) Prompt for launch UVtools after the installation
- (Improvement) Cleanup and simplify the install project
- (Add) PrusaSlicer printer: Peopoly Phenom Forge
- (Upgrade) .NET from 6.0.8 to 6.0.9
- (Fix) Corruption in file after attempt to save to a locked file (#551)
- **File formats:**
- **Anycubic file format:**
- (Add) Compatibility with the next version 517 of the format
- (Improvement) Discovered and implemented more unknown fields
- (Improvement) Dispose layer RLE bytes after encoding
- (Fix) When creating or converting to anycubic file, it don't set the extra table mark name
- (Fix) Only attempt to activate the advanced mode (TSMC) when the BottomLiftHeight2 or LiftHeight2 gets changed
- (Add) Methods: `OnBeforeEncode` and `OnAfterEncode`
- (Improvement) `IsUsingTSMC` now also checks for BottomLiftHeight2 and BottomRetractHeight2
- (Fix) OSF: Can't decode some files
- (Fix) Undo cause application to crash (#543)
- (Add) Debug sub menu to test some behaviours (Only when compiled in debug mode, not visible on public release)
- (Add) Utility method `LayerExists` to the file formats to know if specific layer index exists in the collection
- (Improvement) Add loaded file information to the crash dialog message
- (Fix) Message dialog height do not expand with text (#537)
- (Fix) Crash when all layers get removed and UI attempt to show a layer (#538)
- (Fix) GCode: Improve the regex for parsing layer index from comments, also fixes chitubox zip format layer parsing
- (Fix) MacOS: Auto updater was not copying the files to the right location, leading to not upgrade the program. However this version still need to update manually
- **File formats:**
- (Add) OSF (Vlare Open File Format)
- (Fix) CTB Encrypted: Bottom Retract Height for TSMC was constraining incorrectly with the normal total retract height
- (Fix) CWS: Only issue `;<Slice>` command when the exposure is about to happen (#514)
- **GCode:**
- (Add) Command `CommandWaitSyncDelay` for movement wait sync delay instead of depending on G4 wait command
- (Fix) Wrong parsing and set of wait times when using a wait after lift / wait before retract
- (Improvement) Auto update: Make sure the download url exists before attempt the download, if not, instead it will prompt for manual download and update
- (Improvement) MacOS: Remove `com.apple.quarantine` flag from the auto downloaded files
- (Upgrade) .NET from 6.0.7 to 6.0.8
- (Upgrade) AvaloniaUI from 0.10.17 to 0.10.18
- **Tools**
- **PCB Exposure:**
- (Add) Able to choose the size midpoint rounding method (#520)
- (Fix) Allow to flash alone D03 commands (#520)
- (Fix) Correct line thickness to have at least 1px error (#523)
- (Improvement) Layer arithmetic: Use ; to split and start a new arithmetic operation
- (Add) Cmd: Convert command now allow to pass 'auto' as target type to auto convert specific files, valid for SL1 files configured with FILEFORMAT_xxx (#522)
- (Add) GCode: Command to sync and wait for movement completion [Only enabled for cws format] (#514)
- (Add) VDT: Transition layer count
- (Upgrade) AvaloniaUI from 0.10.16 to 0.10.17
- **File formats:**
- (Add) `LayerImageType`: Gets the layer image data type used on this file format
- (Improvement) jxs, rgb.cws and xml.cws: Improve the layer image read/write performance by a significant amount
- (Fix) xml.cws: Wanhao printers need 32 bit png instead of 8 bit png (#514)
- **PCB Exposure:**
- (Add) Parse of deprecated commands (G70, G71, G90, G91)
- (Fix) Able to have parameterless macro apertures (#503)
- **UI:**
- (Add) Menu -> File -> Free unused RAM: Force the garbage collection of all unused objects within the program to free unused memory (RAM).
It's never required for the end user run this. The program will automatically take care of it when required.
This function is for debug purposes.
- (Improvement) Window title bar: Show elapsed minutes and seconds instead of total seconds minutes and second
- (Fix) Tool - Mask: Loaded image resolution shows as (unloaded)
- (Fix) Applying a large set of modifications in layer depth with pixel editor cause huge memory spike due layer aggregation without disposing, leading to program crash on most cases where RAM is insufficient (#506)
- (Upgrade) AvaloniaUI from 0.10.15 to 0.10.16
- (Add) Layer action - Export layers to HTML: Export file information and layers to an html file
- (Change) CXDLP: Validate header and footer value must start with "CXSW3D" instead of force equal to "CXSW3DV2" (#501)
- (Upgrade) .NET from 6.0.5 to 6.0.6
- **PCB Exposure:**
- (Add) Gerber file extensions: gko, gtl, gto, gts, gbl, gbo, gbs, gml
- (Fix) Trailing zeros suppression mode and improve the parsing of the coordinate string (#492)
- (Fix) Allow coordinates without number `XYD0*` to indicate `X=0` and `Y=0`
- (Fix) Do not try to fetch apertures lower than index 10 when a `D02` (closed shutter) is found alone
- **PCB Exposure:**
- (Fix) Able to omit X or Y coordinate and use last known value in place
- (Fix) Reusing macros in apertures was causing to use the last aperture values for all previous apertures that share the same macro name
- (Fix) Implement the inch measurement (%MOIN*%)
- (Fix) Crash when redo the operation (Ctrl + Shift + Z)
- **UI - Issue list:**
- (Add) Context menu when right click issues to select an action
- (Add) Option to solidify suction cups when right click on the issue
- (Improvement) Better confirmation text when click on remove issue(s) with detailed list of actions
- **PCB Exposure:**
- (Add) Able to select multiple files and create a layer per file or merge them into one layer
- (Add) Able to import files from a zip file
- (Improvement) Round pixel coordinates and line thickness
- (Improvement) Better position precision for primitives
- (Improvement) Disable the ok button if no files were selected
- (Change) Do not auto mirror based on printer lcd mirror type
- (Fix) Limit line thickness to 1px minimum
- (Fix) Allow leading zero omit from XY coordinates (#492)
- (Fix) Mirror option was shifting the board position
- (Add) Calibrate - Blooming effect: Generates test models with various strategies and increments to measure the blooming effect
- (Add) Setting: Issues - Default order by, changes the default order on the issues list (#482)
- (Improvement) CTBv4 and encrypted: Fetch `BottomWaitTimes` virtual property from first bottom layer that has at least 2 pixels (#483)
- (Fix) Linux: Enable desktop integration for AppImages (#490)
- (Fix) Extracting zip contents inside folders would cause a error and not extract those contents
- (Upgrade) AvaloniaUI from 0.10.14 to 0.10.15 [Fixes auto-size problems]
- (Add) Information about the loaded file when copying from the about box
- (Improvement) Tools are now disabled on the menu if not supported by the file format once each file load (#476)
- (Fix) Tool - Edit tool parameters: Overlap label on "per layer override" mode (#478)
- (Fix) Corruption of `GZip` and `Deflate` layer compression methods
- **Core:**
- (Add) Getter `FileFormat.DisplayPixelCount` Gets the display total number of pixels (ResolutionX * ResolutionY)
- (Add) Getter `Layer.NonZeroPixelRatio` Gets the ratio between non zero pixels and display number of pixels
- (Add) Getter `Layer.NonZeroPixelPercentage` Gets the percentage of non zero pixels relative to the display number of pixels
- (Add) Getter `Layer.PreviousHeightLayer()` Gets the previous layer with a different height from the current, returns null if no previous layer
- (Add) Getter `Layer.NextHeightLayer()` Gets the next layer with a different height from the current, returns null if no next layer
- (Add) Method `Layer.GetPreviousLayerWithAtLeastPixelCountOf()` Gets the previous layer matching at least a number of pixels, returns null if no previous layer
- (Add) Method `Layer.GetNextLayerWithAtLeastPixelCountOf()` Gets the next layer matching at least a number of pixels, returns null if no next layer
- (Add) Method `Operation.GetRoiOrVolumeBounds()` returns the selected ROI rectangle or model volume bounds rectangle
- (Add) Documentation around `Operation` methods
- (Fix) Open files in partial mode when the resolution is not defined would cause a `NullPointerException` (#474)
- **Suggestion: Wait time before cure**
- (Add) Proportional maximum time change: Sets the maximum allowed time difference relative to the previous layer (#471)
- (Add) Proportional mass get modes: Previous, Average and Maximum relative to a defined height (#471)
- (Change) Proportional set type sets fallback time to the first layer
- (Fix) Proportional set type was taking current layer mass instead of looking to the previous cured layer (#471)
- **Tools:**
- **Edit print parameters:**
- (Change) Incorporate the unit label into the numeric input box
- (Change) Allow TSMC speeds to be 0 as minimum value (#472)
- (Fix) PCB Exposure: The thumbnail has random noise around the image
- **Settings:**
- (Add) Tools: "Always prompt for confirmation before execute the operation"
- (Fix) Changing layer compression method when no file is loaded would cause a error
- **UI:**
- (Add) Holding Shift key while drag and drop a .uvtop file will try to execute the operation without showing the window or prompt
- (Add) Drag and drop a .cs or .csx file into UVtools will load and show the scripting dialog with the file selected
- (Add) Errors that crash application will now show an report window with the crash information and able to fast report them
- (Add) "Version" key and value on registry to tell the current installed version (Windows MSI only)
- (Upgrade) AvaloniaUI from 0.10.13 to 0.10.14
- (Upgrade) .NET from 6.0.4 to 6.0.5
- (Add) Suggestion - Wait time before cure: Allow to set the number of layers to smooth transition from bottom to normal wait time (Defaults to 8)
- (Fix) Tool - PCB Exposure: Pixels per millimeter was been set to fixed value instead of use printer lcd pitch, causing wrong dimentions on different from 50µm pitch
- (Fix) Tool - PCB Exposure: Unable to run the tool when the display size information isn't available
- **Tools:**
- (Add) PCB exposure: Converts a gerber file to a pixel perfect image given your printer LCD/resolution to exposure the copper traces.
- (Improvement) Export settings now indent the XML to be more user friendly to edit
- (Improvement) Layer import: Allow to have profiles
- (Improvement) Layer import: Validates if selected files exists before execute
- (Fix) Lithophane: Disallow having start threshold equal to end threshold
- (Add) Windows explorer: Right-click on files will show "Open with UVtools" on context menu which opens the selected file on UVtools (Windows MSI only)
- (Improvement) Island and overhang detection: Ignore detection on all layers that are in direct contact with the plate (On same first layer position)
- (Improvement) Cmd: Better error messages for convert command when using shared extensions and no extension
- **UI:**
- (Add) Setting: Restore window last position - If enabled, it will restore the main window last known client position on startup (#460)
- (Add) Setting: Restore window last size - If enabled, it will restore the main window last known client size on startup (#460)
- (Improvement) If there are missing dependencies it will show a proper window with information instead of crashing application without any visuals
- (Improvement) Start maximized is set before windows spawn to prevent the flicker effect on main window
- (Add) File formats: Property `IsUsingTSMC` - Indicates whatever file globals are using TSMC or not
- (Change) Lithophane: Noise removal and gap closing iterations defaults to 0
- (Fix) Anycubic files: Printers are unable to use TSMC values after save (#457)
- (Fix) Pixel Editor button is hidden when using screens with scalling > 100% [dirty-fix] (#458)
- (Upgrade) .NET from 6.0.3 to 6.0.4
- **PrusaSlicer:**
- (Add) AnyCubic M3
- (Add) AnyCubic M3 Max
- (Add) AnyCubic M3 Plus
- (Change) AnyCubic Photon Mono 4K: Display size and remove offset from bed shape
- (Change) AnyCubic Photon Mono X 6K: Display size and remove offset from bed shape
- (Add) File format: AnyCubic PM3 and PM3M (#454)
- (Fix) Tool - Lithophane: Value unit for "Lithophane height" was in px instead of mm
- **Shortcuts:**
- (Add) **Delete:** While on layer preview and with roi or mask(s) selected, will remove the selected area from layer
- (Add) **Alt + Delete:** While on layer preview and with roi or mask(s) selected, will remove the selected area from all layers
- (Add) **Ctrl + Delete:** While on layer preview, will remove the current layer
- (Add) **Insert:** While on layer preview and with roi or mask(s) selected, will keep only the selected area in layer
- (Add) **Alt + Insert:** While on layer preview and with roi or mask(s) selected, will keep only the selected area in all layers
- (Add) **Ctrl + Insert:** While on layer preview, will clone the current layer
- (Add) **Home:** While on layer preview will go to first layer
- (Add) **End:** While on layer preview will go to last layer
- (Add) **Page up:** While on layer preview will skip +10 layers
- (Add) **Page down:** While on layer preview will skip -10 layers
- (Add) Tool - Lithophane: Generate lithophane from a picture
- (Fix) Pixel arithmetic: When run with masks it produce a incorrect outcome
- (Fix) CXDLP: Layer area table miscalculation, causing slow down prints
- **Settings:**
- (Add) Remove source file after automatic conversion (#444)
- (Add) Remove source file after manual conversion (#444)
- (Add) **Average resin bottle cost:** The average cost per one resin bottle of 1000ml.
Used to calculate the material cost when the file lacks that information.
Use 0 to disable this feature and only show the cost if file have that information.
If this value is changed, you need to reload the current file to update the cost.
- (Change) Move "Expand and show tool descriptions by default" to From `General` to `Tools` tab (Setting will reset to default)
- **File formats:**
- (Add) Property `StartingMaterialMilliliters`: Gets the starting material milliliters when the file was loaded
- (Add) Property `StartingMaterialCost`: Gets the starting material cost when the file was loaded
- (Add) Property `MaterialMilliliterCost`: Gets the material cost per one milliliter
- (Improvement) Update `MaterialCost` when `MaterialMilliliters` changes (#449)
- **Raft relief:**
- (Add) Linked lines: Remove the raft, keep supports and link them with lines
- (Improvement) Change the supports detection parameters to be more effective and precise on detect the starting layer
- (Fix) Brightness percentage not getting updated
- (Fix) Remove anti-aliased edges from Tabs
- (Improvement) Core: Minor clean-up
- (Fix) Issue repair error when 'Auto repair layers and issues on file load' is enabled (#446)
- (Fix) UI: Selecting a object with ROI when flip is verically, will cause 1px up-shift on the preview
- (Fix) macOS permission error due loss of attributes on the build script, WSL have bug with mv, using ln&rm instead
- **AnyCubic file format:**
- (Fix) Lift height and speed are not being correctly set on old version, keeping a constant value (#441)
- (Fix) Retract speed getter was not return value from TSMC if using version 516
- **Tool - Infill:**
- (Add) Waves infill type
- (Add) Concentric infill type
- (Add) Gyroid infill type (#443)
- (Change) Increase the default spacing from 200px to 300px
- (Improvement) Fastter infill processing by use the model bounds
- (Add) `FormatSpeedUnit` property to file formats to get the speed unit which the file use internally
- (Fix) UI: ROI rectangle can overlap scroll bars while selecting
- **Core:**
- (Add) Machine presets and able to load machine collection from PrusaSlicer
- (Improvement) Core: Reference EmguCV runtimes into core instead of the UI project
- **File formats:**
- **CXDLP:**
- (Add) Detection support for Halot One Pro
- (Add) Detection support for Halot One Plus
- (Add) Detection support for Halot Sky Plus
- (Add) Detection support for Halot Lite
- (Improvement) Better handling and detection of printer model when converting
- (Improvement) Discovered more fields meanings on format
- (Fix) Exposure time in format is `round(time * 10, 1)`
- (Fix) Speeds in format are in mm/s, was using mm/min before
- (Add) JXS format for Uniformation GKone [Zip+GCode]
- (Improvement) Saving and converting files now handle the file backup on Core instead on the UI, which prevents scripts and other projects lose the original file in case of error while saving
- (Fix) After load files they was flagged as requiring a full encode, preventing fast save a fresh file
- **UVtoolsCmd:**
- Bring back the commandline project
- Consult README to see the available commands and syntax
- Old terminal commands on UVtools still works for now, but consider switch to UVtoolsCmd or redirect the command using `UVtools --cmd "commands"`
- **Tools:**
- **Change print resolution:**
- (Add) Allow to change the display size to match the new printer
- (Add) Machine presets to help set both resolution and display size to a correct printer and auto set fix pixel ratio
- (Improvement) Real pixel pitch fixer due new display size information, this allow full transfers between different printers "without" invalidating the model size
- (Improvement) Better arrangement of the layout
- (Add) Infill: Option "Reinforce infill if possible", it was always on before, now default is off and configurable
- (Improvement) Always allow to export settings from tools
- **GCode:**
- (Improvement) After print the last layer, do one lift with the same layer settings before attempt a fast move to top
- (Improvement) Use the highest defined speed to send the build plate to top after finish print
- (Improvement) Append a wait sync command in the end of gcode if needed
- (Fix) When lift without a retract it still output the motor sync delay for the retract time and the wait time after retract
- **PrusaSlicer:**
- (Add) Printer: Creality Halot One Pro CL-70
- (Add) Printer: Creality Halot One Plus CL-79
- (Add) Printer: Creality Halot Sky Plus CL-92
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality CT133 Pro
- (Add) Printer: Creality CT-005 Pro
- (Add) Printer: Uniformation GKone
- (Add) Printer: FlashForge Foto 8.9S
- (Add) Printer: Elegoo Mars 2
- (Improvement) Rename all Creality printers
- (Fix) Creality model in print notes
- (Add) Raft relief: Tabs type - Creates tabs around the raft to easily insert a tool under it and detach the raft from build plate
- (Add) Linux AppImage binaries (You won't get them with auto-update, please download AppImage once before can use auto-update feature in the future)
- (Change) Rename "layer compression method" to "layer compression codec", please redefine the codec setting if you changed before
- (Improvement) Linux and macOS releases are now compiled, published and packed under Linux (WSL). Windows release still and must be published under windows.
Tiago Conceição