- (Improvement) Remove developer machine path in PDB / error messages
- (Fix) HoneyComb infill not going to the right most edge of the image (#649)
- (Fix) AnyCubic machine names were not showing in most files
- (Fix) PWMX: Unable to set version 1
- (Fix) LGS: Converted files to lgs cause program to crash with `Value was either too large or too small for a Decimal` (#653)
- **UVtoolsCmd:**
- **print-properties:**
- (Change) `-b`, `--base` option to `-a`, `-all` to indicate all properties and sub-properties, now defaults to only show base properties
- (Add) `-r`, `--range` option to prints only the matching layer(s) index(es) in a range
- (Add) `-i`, `--indexes` option to prints only the matching layer(s) index(es)
- (Add) Command: `set-properties <input-file> <property=value> Set properties in a file or to it layers with new values`
- (Add) Command: `print-issues <input-file> Detect and print issues in a file`
- (Add) New option to the `run` command: `-p, --property <property=value> Set a property with a new value (Compatible with operations only)`
- (Remove) Command: `print-layers` as it has been moved to `print-properties`, use `-r :` to obtain same result as default on `print-layers`
- **Issues:**
- (Fix) Issues groups with only one issue was displaying the wrong area value
- (Fix) Volume incorrectly calculated, resulting in a high value for group of issues
- (Fix) Incorrect calculation of the bounding rectangle for a group of issues
- **Repair layers:**
- (Add) Switch to opt between "Re-detect the selected issues before repair" and "Use and repair the previous detected issues" (Default)
- (Improvement) Do not allow to run the tool if there are no detected issues when the option "Use and repair the previous detected issues" is selected
- (Improvement) Linux: Recompile libcvextern.so on a older system to be able to run on both older and newest system (#603)
- (Upgrade) .NET from 6.0.10 to 6.0.11
- **Layer:**
- (Add) Property: `LayerMatBoundingRectangle`
- (Add) Property: `LayerMatModelBoundingRectangle`
- (Add) Method: `GetLayerMat(roi)`
- **Issues:**
- **Islands:**
- (Improvement) Islands detection performance
- (Improvement) Required area to consider an island is now real area instead of bounding box area
- (Fix) Logic bug when combining with overhangs
- **Overhangs:**
- (Improvement) Overhangs detection performance
- (Improvement) Overhangs are now split and identified as separately in the layer
- (Improvement) Overhangs now shows the correct issue area and able to locate the problem region more precisely
- (Improvement) Compress overhangs into contours instead of using whole pixels, resulting in better render performance and less memory to hold the issue
- (Fix) Bug in overhang logic causing to detect the problem twice when combined with supports
- (Improvement) Touching bounds check logic to spare cycles
- **Tool - Raise platform on print finish:**
- (Add) Preset "Minimum": Sets to the minimum position
- (Add) Preset "Medium": Sets to half-way between minimum and maximum position
- (Add) Preset "Maximum": Sets to the maximum position
- (Add) Wait time: Sets the ensured wait time to stay still on the desired position.
This is useful if the printer firmware always move to top and you want to stay still on the set position for at least the desired time.
Note: The print time calculation will take this wait into consideration and display a longer print time.
- (Add) FileFormat: AnyCubic custom machine (.pwc)
- (Downgrade) OpenCV from 4.5.5 to 4.5.4 due a possible crash while detecting islands (Windows)
- **AnyCubic file format:**
- (Fix) Lift height and speed are not being correctly set on old version, keeping a constant value (#441)
- (Fix) Retract speed getter was not return value from TSMC if using version 516
- **Tool - Infill:**
- (Add) Waves infill type
- (Add) Concentric infill type
- (Add) Gyroid infill type (#443)
- (Change) Increase the default spacing from 200px to 300px
- (Improvement) Fastter infill processing by use the model bounds
- (Add) `FormatSpeedUnit` property to file formats to get the speed unit which the file use internally
- (Fix) UI: ROI rectangle can overlap scroll bars while selecting
- **Core:**
- (Add) Machine presets and able to load machine collection from PrusaSlicer
- (Improvement) Core: Reference EmguCV runtimes into core instead of the UI project
- **File formats:**
- **CXDLP:**
- (Add) Detection support for Halot One Pro
- (Add) Detection support for Halot One Plus
- (Add) Detection support for Halot Sky Plus
- (Add) Detection support for Halot Lite
- (Improvement) Better handling and detection of printer model when converting
- (Improvement) Discovered more fields meanings on format
- (Fix) Exposure time in format is `round(time * 10, 1)`
- (Fix) Speeds in format are in mm/s, was using mm/min before
- (Add) JXS format for Uniformation GKone [Zip+GCode]
- (Improvement) Saving and converting files now handle the file backup on Core instead on the UI, which prevents scripts and other projects lose the original file in case of error while saving
- (Fix) After load files they was flagged as requiring a full encode, preventing fast save a fresh file
- **UVtoolsCmd:**
- Bring back the commandline project
- Consult README to see the available commands and syntax
- Old terminal commands on UVtools still works for now, but consider switch to UVtoolsCmd or redirect the command using `UVtools --cmd "commands"`
- **Tools:**
- **Change print resolution:**
- (Add) Allow to change the display size to match the new printer
- (Add) Machine presets to help set both resolution and display size to a correct printer and auto set fix pixel ratio
- (Improvement) Real pixel pitch fixer due new display size information, this allow full transfers between different printers "without" invalidating the model size
- (Improvement) Better arrangement of the layout
- (Add) Infill: Option "Reinforce infill if possible", it was always on before, now default is off and configurable
- (Improvement) Always allow to export settings from tools
- **GCode:**
- (Improvement) After print the last layer, do one lift with the same layer settings before attempt a fast move to top
- (Improvement) Use the highest defined speed to send the build plate to top after finish print
- (Improvement) Append a wait sync command in the end of gcode if needed
- (Fix) When lift without a retract it still output the motor sync delay for the retract time and the wait time after retract
- **PrusaSlicer:**
- (Add) Printer: Creality Halot One Pro CL-70
- (Add) Printer: Creality Halot One Plus CL-79
- (Add) Printer: Creality Halot Sky Plus CL-92
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality CT133 Pro
- (Add) Printer: Creality CT-005 Pro
- (Add) Printer: Uniformation GKone
- (Add) Printer: FlashForge Foto 8.9S
- (Add) Printer: Elegoo Mars 2
- (Improvement) Rename all Creality printers
- (Fix) Creality model in print notes
- **Benchmark:**
- (Add) PNG, GZip, Deflate and LZ4 compress tests
- (Change) Test against a known image instead of random noise
- (Change) Single-thread tests from 100 to 200 and multi-thread tests from 1000 to 5000
- (Improvement) Same image instance is shared between tests instead of create new per test
- (Fix) Encode typo
- **Core:**
- (Add) Layer compression method: Allow to choose the compression method for layer image
- **PNG:** Compression=High Speed=Slow (Use with low RAM)
- **GZip:** Compression=Medium Speed=Medium (Optimal)
- **Deflate:** Compression=Medium Speed=Medium (Optimal)
- **LZ4:** Compression=Low Speed=Fast (Use with high RAM)
- (Improvement) Better handling on cancel operations and more immediate response
- (Fix) Extract: Zip Slip Vulnerability (CWE-22)
- **File formats:**
- (Improvement) Better handling of encode/decoding layers from zip files
- (Fix) ZCode: Canceling the file load can trigger an error
- (Fix) VDA: Unable to open vda zip files
- **Tools:**
- (Improvement) Allow operations to be aware of ROI and Masks before execution (#436)
- (Improvement) Scripting: Allow save and load profiles (#436)
- (Fix) Adjust layer height: When using the Offset type the last layer in the range was not taken in account (#435)
- **UI:**
- (Improvement) Allow layer zoom levels of 0.1x and 64x but constrain minimum zoom to the level of image fit
- (Improvement) Update change log now shows with markdown style and more readable
- (Fix) Windows MSI upgrade to this version (#432)
- (Fix) Auto-updater for Mac ARM, was downloading x64 instead
- **(Add) Suggestions:**
- A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
- **Avaliable suggestions:**
- **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
- **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
- **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
- **Layer height:** Using the right layer height is important to get successful prints:
Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
- Convert the project to Nullable aware and "null-safe"
- **File Formats:**
- (Add) `Volume` property to get the total model volume
- (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
- (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
If using scripts please update them, search for `.LayerManager.` and replace by `.`
- (Change) Chitubox encrypted format can now be saved as normal
- (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
- (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
- (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
- (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
- (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
- (Improvement) Convert scripts to use Nullable code
- **UI:**
- (Add) Fluent Dark theme
- (Add) Default Light theme
- (Add) Default Dark theme
- (Change) Use fontawesome and material design to render the icons instead of static png images
- (Change) Some icons
- (Change) Move log tab to clipboard tab
- (Change) Tooltip overlay default color
- (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
- (Fix) Center image icon for layer action button
- (Fix) Center image icon for save layer image button
- **Tools:**
- (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
- (Improvement) Rotate: Unable to use an angle of 0
- (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
- (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
- (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
- (Add) More default namespaces
- (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
- (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
- This brings big performance improvements, better JIT, faster I/O operations and others
- Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
- Due this macOS requirement starts at 10.15 (Catalina)
- Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
- **Tool - Morph:**
- (Add) Operator: White tophat - Removes small isolated pixels and only return its affected pixels (Image - Noise removal)
- (Add) Operator: Black tophat - Closes small holes inside the objects and only return its affected pixels (Gap closing - Image)
- (Add) Operator: Hit or miss - Finds pixels in a given kernel pattern
- (Remove) Operator: 'Isolate features' as that is the same as the 'White tophat' and is already inbuilt into OpenCV
- **Kernels:**
- (Add) Option: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Add) Kernels are now saved with the operation profile
- **PrusaSlicer:**
- (Add) Support to slice files to be converted for encrypted CTB format
- (Add) Printer: Elegoo Mars 3 (#370)
- (Add) Printer: EPAX E10 5K
- (Add) Printer: EPAX X10 5K
- (Add) Printer: Phrozen Sonic Mini 8K
- (Add) Printer: Phrozen Sonic Mega 8K
- (Fix) Printer: AnyCubic Photon Mono 4K - display size (#369)
- (Fix) Printer: AnyCubic Photon Mono X 6K - display size (#369)
- (Add) Tool - Double exposure: Kernel configuration
- (Add) Tool - Pixel arithmetic: Kernel configuration
- (Add) Calibration - Elephant foot: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Fix) Calibrate - Elephant foot: Redo (Ctrl + Z) the operation was crashing the application
- (Fix) CTB, PHZ, FDG: Converting files with a null machine name would cause a exception
- (Fix) Anycubic files: Bottom lift and speed were showing default values instead of real used value
- (Add) Setting - Max degree of parallelism: Sets the maximum number of concurrent tasks/threads/operations enabled to run by parallel method calls.
If your computer lags and freeze during operations you can reduce this number to reduce the workload and keep some cores available to other tasks as well.
<= 0: Will utilize however many threads the underlying scheduler provides, mostly this is the processor count.
1: Single thread. (#279)
- (Add) Tool - Light bleed compensation: Compensate the over-curing and light bleed from clear resins by dimming the sequential pixels
- (Add) Infill: Honeycomb infill type
- (Upgrade) MessageBox from 1.2.0 to 1.3.1 to fix the small size messages
* **Core:**
* Fix some improper locks for progress counter and change to Interlocked instead
* Fix a bug when chaging layer count by remove or add layers it will malform the file after save and crash the program with some tools and/or clipboard
* Fix when a operation fails by other reason different from cancelation it was not restoring the backup
* When manually delete/fix issues it will also backup the layers
* **LayerManager:**
* LayerManager is now readonly and no longer used to transpose layers, each FileFormat have now a unique `LayerManager` instance which is set on the generic constructor
* Implemented `List<Layer>` methods to easy modify the layers array
* Changing the `Layers` instance will now recompute some properties, call the properties rebuild and forced sanitize of the structure
* Better reallocation methods
* **Clipboard Manager:**
* Add the hability to do full backups, they will be marked with an asterisk (*) at clipboard items list
* When a partial backup is made and it backups all the layers it will be converted to full backup
* Clipboard can now restore a snapshot directly with `RestoreSnapshot`
* Prevent restore the initial backup upon file load and when clearing the clipboard
* Clip's that change the layer count will perform a full backup and also do a fail-safe backup behind if previous clip is not a full backup
* **Pixel dimming:**
* Allow to load an image file as a pattern (Do not use very large files or it will take much time to dump the data into the textbox)
* Empty lines on patterns will be discarded and not trigger validation error
* **File formats:**
* Add a layer height check on file load to prevent load files with more decimal digits than supported to avoid precision errors and bugs
* Fix a wrong cast causing seconds to miliseconds convertion to be caped to the wrong value
* Internally if a layer colection was replaced, all new layers will be marked as modified to avoid forgeting and ease the code
* **Tools:**
* Pixel dimming: Better render quality, it now respects AA better and produce better walls (#172)
* Elephant foot: It now respects AA better and produce better walls for wall dimming
* Layer Import: Cancelling the operation while importing layers was permanent supresseing layer properties update when changing a base property
* (Change) PrusaSlicer print profiles: Improved raft height and bottom layer count for better print success, less delamination, shorter time and reduce wear of FEP
* (Scripts): Add operation "Validate" pattern to docs and examples (#172)
* **Core:**
* Write "Unhandled Exceptions" to an "errors.log" file at user settings directory
* Increase layer height max precision from 2 to 3 decimals
* **Settings - Layer Preview:**
* Allow to set hollow line thickness to -1 to fill the area
* Add tooltip for "Auto rotate on load": Auto rotate the layer preview on file load for a landscape viewport
* Add option to masks outline color and thickness
* Add option to clear ROI when adding masks
* Add option "Auto flip on load": Auto flip the layer preview on file load if the file is marked to print mirrored on the printer LCD
* **Layer preview:**
* Add selectable rotation directions 90º (CW and CCW)
* Add preview flip (CTRL+F) horizontally and/or vertically
* Add maskable regions to process on a layer (SHIFT + Alt + Click) on a area
* ROI: Shortcut "Shift + left click" now also selects hollow black areas inside a white perimeter
* ROI: Shortcut "ESC + Shift" to clear only the ROI and leave masks in
* Fix a crash when using the pixel picker tool outside image bounds
* **Pixel editor:**
* Change drawings brush diameter limit from 255 to 4000 maximum
* When using layers below go lower than layer 0 it no longer apply the modifications
* **File formats:**
* Add an internal GCodeBuilder to generate identical gcode within formats with auto convertion, managing features and parsing information
* Internally rearrange formats properties and pass values to the base class
* Fix "Save As" filename when using formats with dual extensions
* CBDDLP and CTB: "LightPWM" was setting "BottomLightPWM" instead
* CWS: Fix problem with filenames with dots (.) and ending with numbers (#171)
* CWS: Improved the enconding and decoding performance
* CWS: Implement all available print paramenters and per layer, missing values are got from gcode interpretation
* CWS: Use set "light off delay" layer value instead of calculating it
* CWS: Get light off delay per layer parsed from gcode
* CWS - RGB flavour (Bene4 Mono): Warn about wrong resolution if width not multiples of 3 (#171)
* ZCode: Allow to set Bottom and Light intensity (LightPWM) on paramters and per layer
* ZCode: Allow to change bottom light pwm independent from normal light pwm
* LGS: Light off and bottom light off was setting the value on the wrong units
* UVJ: Unable to set per layer parameters
* **Issues:**
* When computing islands and resin traps together, they will not compute in parallel anymore to prevent CPU and tasks exaustion, it will calculate islands first and then resin traps, this should also speed up the process on weaker machines
* Gather resin trap areas together when computing for other issues to spare a decoding cycle latter
* When using a threshold for islands detection it was also appling it to the overhangs
* Fix the spare decoding conditional cycle for partial scans
* Change resin trap search from parallel to sync to prevent fake detections and missing joints at cost of speed (#13)
* **Tools:**
* Add layer selector: 'From first to current layer' and 'From current to last layer'
* I printed this file: Multiplier - Number of time(s) the file has been printed. Half numbers can be used to consume from a failed print. Example: 0.5x if a print canceled at 50% progress
* Pixel dimming: Increase wall thickness default from 5px to 10px
* Import layers: Importing layers was not marking layers as modified, then the save file won't save the new images in, to prevent other similar bugs, all layers that got replaced will be auto marked as modified
* (Add) Setting: Expand and show tool descriptions by default
* (Improvement) Drag and drop a file on Main Window while hold SHIFT key will open the file under a new instance
* (Improvement) PrusaSlicer & SL1 files: Allow to set custom variables on "Material - Notes" per resin to override the "Printer - Notes" variables
This will allow custom settings per resin, for example, if you want a higher 'lift height, lift speed, etc' on more viscous resins. (#141)
* (Change) Setting: Windows vertical margin to 60px
* (Fix) Export file was getting a "Parameter count mismatch" on some file formats (#140)
* (Fix) photon and cbddlp file formats with version 3 to never hash images
* (Fix) Windows was not geting the screen bounds from the active monitor
* (Fix) Tool windows height, vertical margin and position
* **(Fix) Exposure time finder:**
* Text label
* Set vertical splitter to not show decimals, int value
* Set vertical splitter default to 0
* Allow vertical splitter to accept negative values
* Optimized the default values
* Removed similar letters from text
* Add some symbols to text to validate overexposure
* Decrease Features height minimum value to 0.5mm
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* (Add) Infill: CubicDynamicLink - Alternates centers with lateral links, consume same resin as center linked and make model/infill stronger.
* (Add) Update estimate print time when modify dependent parameters (#103)
* (Add) Tool - Calculator: Old and new print time estimation (#103)
* (Fix) Print time calculation was using normal layers with bottom layer off time
* (Fix) Calculate print time based on each layer setting instead of global settings
* (Add) Changelog description to the new version update dialog
* (Add) Tool - Infill: Proper configurable infills
* (Add) Pixel area as "px²" to the layer bounds and ROI at layer bottom information bar
* (Add) Pixel dimming: Alternate pattern every x layers
* (Add) Pixel dimming: Lattice infill
* (Add) Solidify: Required minimum/maximum area to solidify found areas (Default values will produce the old behaviour)
* (Add) Issues: Allow to hide and ignore selected issues
* (Add) Issue - Touch boundary: Allow to configure Left, Top, Right, Bottom margins in pixels, defaults to 5px (#94)
* (Add) UVJ: Allow convert to another formats (#96)
* (Add) Setters to some internal Core properties for more abstraction
* (Improvement) Issue - Touch boundary: Only check boundary pixels if layer bounds overlap the set margins, otherwise, it will not waste cycles on check individual rows of pixels when not need to
* (Change) Place .ctb extension show first than .cbddlp due more popular this days
* (Change) Pixel dimming: Text "Borders" to "Walls"
* (Change) Issues: Remove "Remove" text from button, keep only the icon to free up space
* (Change) Ungroup extensions on "covert to" menu (#97)
* (Fix) Issues: Detect button has a incorrect "save" icon
* (Fix) SL1: Increase NumSlow property limit
* (Fix) UVJ: not decoding nor showing preview images
* (Fix) "Convert to" menu shows same options than previous loaded file when current file dont support convertions (#96)
* (Fix) Hides "Convert to" menu when unable to convert to another format (#96)
* (Fix) Program crash when demo file is disabled and tries to load a file in
* (Fix) Rare crash on startup when mouse dont move in startup period and user types a key in meanwhile
* (Fix) On a slow startup on progress window it will show "Decoded layers" as default text, changed to "Initializing"
Tiago Conceição