- **Benchmark:**
- (Add) PNG, GZip, Deflate and LZ4 compress tests
- (Change) Test against a known image instead of random noise
- (Change) Single-thread tests from 100 to 200 and multi-thread tests from 1000 to 5000
- (Improvement) Same image instance is shared between tests instead of create new per test
- (Fix) Encode typo
- **Core:**
- (Add) Layer compression method: Allow to choose the compression method for layer image
- **PNG:** Compression=High Speed=Slow (Use with low RAM)
- **GZip:** Compression=Medium Speed=Medium (Optimal)
- **Deflate:** Compression=Medium Speed=Medium (Optimal)
- **LZ4:** Compression=Low Speed=Fast (Use with high RAM)
- (Improvement) Better handling on cancel operations and more immediate response
- (Fix) Extract: Zip Slip Vulnerability (CWE-22)
- **File formats:**
- (Improvement) Better handling of encode/decoding layers from zip files
- (Fix) ZCode: Canceling the file load can trigger an error
- (Fix) VDA: Unable to open vda zip files
- **Tools:**
- (Improvement) Allow operations to be aware of ROI and Masks before execution (#436)
- (Improvement) Scripting: Allow save and load profiles (#436)
- (Fix) Adjust layer height: When using the Offset type the last layer in the range was not taken in account (#435)
- **UI:**
- (Improvement) Allow layer zoom levels of 0.1x and 64x but constrain minimum zoom to the level of image fit
- (Improvement) Update change log now shows with markdown style and more readable
- (Fix) Windows MSI upgrade to this version (#432)
- (Fix) Auto-updater for Mac ARM, was downloading x64 instead
- **(Add) Suggestions:**
- A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
- **Avaliable suggestions:**
- **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
- **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
- **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
- **Layer height:** Using the right layer height is important to get successful prints:
Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
- Convert the project to Nullable aware and "null-safe"
- **File Formats:**
- (Add) `Volume` property to get the total model volume
- (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
- (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
If using scripts please update them, search for `.LayerManager.` and replace by `.`
- (Change) Chitubox encrypted format can now be saved as normal
- (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
- (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
- (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
- (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
- (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
- (Improvement) Convert scripts to use Nullable code
- **UI:**
- (Add) Fluent Dark theme
- (Add) Default Light theme
- (Add) Default Dark theme
- (Change) Use fontawesome and material design to render the icons instead of static png images
- (Change) Some icons
- (Change) Move log tab to clipboard tab
- (Change) Tooltip overlay default color
- (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
- (Fix) Center image icon for layer action button
- (Fix) Center image icon for save layer image button
- **Tools:**
- (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
- (Improvement) Rotate: Unable to use an angle of 0
- (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
- (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
- (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
- (Add) More default namespaces
- (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
- (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
- This brings big performance improvements, better JIT, faster I/O operations and others
- Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
- Due this macOS requirement starts at 10.15 (Catalina)
- Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
- **File formats:**
- (Add) Transition layer count to the supported files and auto compute transition time on corresponding layers in software mode
- (Add) `HaveTransitionLayers`, `TransitionLayersType`, `BottomLayers`, `NormalLayers`, `TransitionLayers`, `TsmcLayers` properties
- (Add) Layer: `IsTransitionLayer` property
- (Add) SL1: Keyword `TransitionLayerCount_xxx` - Sets the number of transition layers
- (Improvement) CTB, PHZ, FDG: Implement the `ModifiedTimestampMinutes` field, it was the MysteriousId before as an unknown field
- (Fix) CWS: Open in partial mode will cause an exception and prevent file from load
- **CCode:**
- (Add) Allow inverse lifts to work as an retract
- (Fix) Parsing of WaitTimeAfterLift was incorrect when lacking a lift sequence
- (Fix) Layers lacking an exposure time was defaulting to global time, now defaults to 0
- (Fix) Layers without a LED ON (M106) was setting `LightPWM` to the max value (255), now defaults to 0
- **Tools:**
- **Timelapse:**
- (Add) Information: Raise Layer count equivalence
- (Add) Information: Additional lifts to be generated
- (Add) Option: Ensure the last layer - If enabled, it will generate an obligatory layer to cover the last layer
- (Improvement) Optimize lift for virtual layer mode, allowing set a slow and fast lift / retract by using another virtual layyer to emulate a lift
- (Improvement) Allow to define slow and fast speed for virtual layer mode even if TSMC isn't supported
- (Add) Fade exposure time: Setting 'Disable firmware transition layers' - Attempt to disable firmware strict transition layers in favor of this tool
- (Add) Calibration tests: Attempt to auto disable the firmware transifiton layers
- (Change) Edit print parameters: Allow set `BottomLiftHeight` and `LiftHeight` to 0mm
- **UI:**
- (Improvement) Disallow drop files into UI when is processing data / disabled and prevent crashing from that action
- (Improvement) Information tab visibility and MinHeight for data grids
- (Improvement) Hide/show GCode tab when necessary (dependent on file format)
- (Improvement) The 'save as' will show the new file into 'Open recent' files
- **PrusaSlicer printers:**
- (Add) Elegoo Jupiter
- (Add) EPAX X1 4KS
- (Add) EPAX DX1 Pro
- (Add) EPAX DX10 Pro 5K
- (Add) EPAX DX10 Pro 8K
- (Add) EPAX E10 8K
- (Add) EPAX X133 6K
- **UI:**
- (Add) When converting file formats with multiple available versions, it will prompt to select the version to use
- (Add) Remove CTBv4 from convert menu (Will require readjust settings for default extension if you are using an below extension) (#286)
- (Change) Rename CTBv3 to CTB on the convert menu
- (Fix) CXDLP: Set version 3 was setting wrong information
- **Tool - Morph:**
- (Add) Operator: White tophat - Removes small isolated pixels and only return its affected pixels (Image - Noise removal)
- (Add) Operator: Black tophat - Closes small holes inside the objects and only return its affected pixels (Gap closing - Image)
- (Add) Operator: Hit or miss - Finds pixels in a given kernel pattern
- (Remove) Operator: 'Isolate features' as that is the same as the 'White tophat' and is already inbuilt into OpenCV
- **Kernels:**
- (Add) Option: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Add) Kernels are now saved with the operation profile
- **PrusaSlicer:**
- (Add) Support to slice files to be converted for encrypted CTB format
- (Add) Printer: Elegoo Mars 3 (#370)
- (Add) Printer: EPAX E10 5K
- (Add) Printer: EPAX X10 5K
- (Add) Printer: Phrozen Sonic Mini 8K
- (Add) Printer: Phrozen Sonic Mega 8K
- (Fix) Printer: AnyCubic Photon Mono 4K - display size (#369)
- (Fix) Printer: AnyCubic Photon Mono X 6K - display size (#369)
- (Add) Tool - Double exposure: Kernel configuration
- (Add) Tool - Pixel arithmetic: Kernel configuration
- (Add) Calibration - Elephant foot: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Fix) Calibrate - Elephant foot: Redo (Ctrl + Z) the operation was crashing the application
- (Fix) CTB, PHZ, FDG: Converting files with a null machine name would cause a exception
- (Fix) Anycubic files: Bottom lift and speed were showing default values instead of real used value
- **File formats:**
- (Add) Allow to partial open the files for read and/or change properties, the layer images won't be read nor cached (Fast)
- (Add) More abstraction on partial save
- **Scripting:**
- (Add) ScriptOpenFolderDialogInput - Selects a folder path
- (Add) ScriptOpenFileDialogInput - Selectes a file to open
- (Add) ScriptSaveFileDialogInput - Selects a file to save
- (Add) [UNSAVED] tag to the title bar when there are unsaved changes on the current session
- (Improvement) Better handling of empty images on the UI
- Issues:
- (Add) Suction cups: Add a auto repair feature for this issues by drill a vertical vent hole (#296)
- (Add) Layer issue track bar: Colorize the issue tracker map with it own colors (Configurable)
- (Add) Allow to group issues by type and/or layer
- (Improvement) Order issues by area in descending order
- (Improvement) Always bring the selected issue into view on the list
- (Fix) When manually removing a issue from the list, it will no longer reselect other and make the user lost track of the remove issue
- (Fix) Allow to ignore all issue type
- (Fix) Material ml calculation was calculating a bad value for PhotonWorkshop files
- (Add) Setting - Max degree of parallelism: Sets the maximum number of concurrent tasks/threads/operations enabled to run by parallel method calls.
If your computer lags and freeze during operations you can reduce this number to reduce the workload and keep some cores available to other tasks as well.
<= 0: Will utilize however many threads the underlying scheduler provides, mostly this is the processor count.
1: Single thread. (#279)
- **(Fix) CTB:**
- Converting a file to version 4 won't port the TMSC values (#271)
- Force version 3 when on version 4 and converting to photon or cbddlp
- **(Improvement) Export to SVG image:**
- Group \<g\> all layer objects
- Intersect all childs on same \<path\>
- **PrusaSlicer:**
- (Rename) Printer keywords notes:
- BottomWaitBeforeCure -> BottomWaitTimeBeforeCure
- WaitBeforeCure -> WaitTimeBeforeCure
- BottomWaitAfterCure -> BottomWaitTimeAfterCure
- WaitAfterCure -> WaitTimeAfterCure
- BottomWaitAfterLift -> BottomWaitTimeAfterLift
- WaitAfterLift -> WaitTimeAfterLift
- (Change) PrusaSlicer gcode printers to reflect the previous changes
- (Change) PrusaSlicer Creality Hallot printers with better values by default
- (Fix) PrusaSlicer printers with TMSC values was not being ported to the file format
- (Fix) CXDLP: The light-off delay is not present on the format, instead the wait time before cure is used, this was leading to high wait and print times
- (Fix) Converting from files that aren't both TSMC compatible won't set the bottom and lift height
- (Fix) Error when changing the layer collection with another with higher layer count than the previous
- **File formats:**
- Add and remove some image types that can be open
- (Add) `CanProcess` method to know if a file can be read under a format and to allow diferent formats with same extension
- (Fix) `LiftHeightTotal` and `RetractHeight` was rounding to no decimals and returning wrong values
- (Improvement) Round all float setters on `Layer` class
- (Improvement) Decode/encode RAM usage and performance by processing in batch groups
- **Pixel Dimming:** (#262)
- (Add) Option "Lightening pixels" to add brightness/lightening instead of dimming/subtract pixels
- (Fix) "Dim walls only" would reset body brightness by increase pixel brightness two times it value
- **Pixel Arithmetic:**
- (Change) Transpose "Pixel Dimming" to "Pixel Arithmetic"
- (Improvement) New options and manipulations
- **(Fix) Exposure time finder:**
- Generate top staircase based on selected measure (px or mm)
- Zebra bars when used in mm measures, it was using X density instead Y to calculate the thickness
- Move 'Unit of measure' to 'Object configuration'
- Custom text with wrong Y position when using out of portion resolutions/LCDs
- **CTBv4:**
- (Fix) More Unknown fields discovered and implemented
- (Fix) Reserved table is 384 bytes instead of 420
- (Fix) When full encoding it was forcing to change to version 3. This also affected convertions. (#263)
- (Fix) `BottomRetractHeight2` was being set to `BottomRetractSpeed2`
- (Fix) `RetractHeight2` was being set to `RetracSpeed2`
- (Fix) The PrintParametersV4 table address
- (Fix) Generates invalid files to open with Chitubox and printers (#263)
- (Fix) Better progress report
- **(Add) PrusaSlicer printer notes variables:**
- BottomLiftHeight2
- BottomLiftSpeed2
- LiftHeight2
- LiftSpeed2
- BottomRetractSpeed
- BottomRetractSpeed2
- BottomRetractHeight2
- BottomRetractSpeed2
- RetractHeight2
- RetractSpeed2
- **UI:**
- (Add) File - Open current file folder (Ctrl+Shift+L): Locate and open the folder that contain the current loaded file
- (Improvement) Hide some virtual extensions from file open dialog filters
- (Improvement) UI: Refresh active thumbnail when changed
- (Change) Icon for File - Open and Open in a new file
- (Change) Rename File - Extract to: Extract file contents
- (Upgrade) AvaloniaUI from 0.10.6 to 0.10.7
- (Fix) PW0, PWM, PWMX, PWMO, PWMS: Unable to decode some files with AntiAliasing (#143)
- **Command line arguments:**
- (Add) Convert files: UVtools.exe -c \<inputfile\> \<outputfile1/ext1\> [outputfile2/ext2]
- (Add) Extract files: UVtools.exe -e \<inputfile\> [output_folder]
- https://github.com/sn4k3/UVtools#command-line-arguments
- **File formats:**
- (Add) Implement TSMC (Two Stage Motor Control) for the supported formats
- (Add) Implement 'Bottom retract speed' for the supported formats
- (Add) LGS: Support for lgs120 and lg4k (#218)
- (Add) CTB: Special/virtual file extensions .v2.ctb, .v3.ctb, .v4.ctb to force a convertion to the set version (2 to 4). The .ctb is Version 3 by default when creating/converting files
- (Improvement) Better performance for file formats that decode images in sequential pixels groups
- **GCode:**
- (Improvement) Better parsing of the movements / lifts
- (Improvement) Better handling of lifts performed after cure the layer
- (Improvement) More fail-safe checks and sanitize of gcode while parsing
- (Improvement) CTBv3: Enable per layer settings if disabled when fast save without reencode
- (Upgrade) .NET from 5.0.8 to 5.0.9
- (Fix) PrusaSlicer printer: Longer Orange 4k with correct resolution and display size
- (Fix) Odd error when changing properties too fast in multi-thread
- **Windows MSI:**
- (Fix) Use the folder programs x64 instead of x86 for new installation path (#254)
- (Improvement) Mark program and all files as x64
- (Improvement) Add UVtools logo to side panel and top banner
- (Improvement) Add open-source logo to side panel
- (Improvement) License text aligment and bold title
- (Add) File format: OSLA / ODLP / OMSLA - Universal binary file format
- (Add) Calibration - Lift height: Generates test models with various strategies and increments to measure the optimal lift height or peel forces for layers given the printed area
- (Add) Layer Actions - Export layers to images (PNG, JPG/JPEG, JP2, TIF/TIFF, BMP, PBM, PGM, SR/RAS and SVG)
- (Add) About box: License with link
- (Add) Include a copy of the LICENSE on the packages
- (Improvement) File formats: Implement `Wait time before cure` properties on file formats with light-off delay, when used it will calculate the right light-off delay with that extra time and set to `LightOffDelay` property
- (Improvement) Change all date times to Utc instead of local
- (Fix) Tool - Flip: 'Both' were not working correctly
- (Fix) Linux: File 'UVtools.sh' with incorrect line break type, changed to \n (#258)
- **File formats:**
- (Add) Wait time before cure: The time to rest/wait in seconds before cure a new layer
- (Add) Wait time before after: The time to rest/wait in seconds after cure a new layer
- (Add) Wait time after lift: The time to rest/wait in seconds after a lift/peel move
- (Change) All gcode file formats dropped light-off delay field in favor of new 'Wait time before cure' field, setting light-off delay still valid but it redirects to the new field
- (Change) Reorder 'Light-off delay' before 'Exposure time'
- (Improvement) Recalculate the print time when a related property changes
- (Fix) Generic time estimation calculation was ignoring exposure times
- (Fix) Unable to load files with uppercase extensions
- (Fix) ZIP: Use G1 at end of gcode instead of G0
- (Fix) CWS: Use G1 for movements
- **(Fix) CXDLP:** (#240)
- Layer area calculation
- Validation checksum
- **(Fix) ZCODE:**
- Use G1 at end of gcode instead of G0 to prevent crash to top bug on firmware
- Put back the M18 motors off at end of gcode
- **GCode Builder/Parser:**
- (Add) Allow to choose between G0 and G1 for layer movements and end gcode
- (Fix) Safe guard: If the total print height is larger than set machine Z, do not raise/lower print on completeness
- (Fix) Light-off delay is the real delay time and not the calculated movement of the lifts plus the extra time
- (Improvement) Parse gcode line by line instead searching on a group of layers to allow a better control and identification
- **Tools:**
- **Change print parameters:**
- (Add) Tooltips to labels
- (Add) Sun UTF-8 to the Light PWM value unit to describe intensity
- (Improvement) Dynamic lifts: Round lift height and speed to 1 decimal
- (Fix) Exposure time finder: Time estimation when using 'Use different settings for layers with same Z positioning'
- **Prusa Slicer:**
- (Add) Note keyword: BottomWaitBeforeCure_xxx
- (Add) Note keyword: WaitBeforeCure_xxx
- (Add) Note keyword: BottomWaitAfterCure_xxx
- (Add) Note keyword: WaitAfterCure_xxx
- (Add) Note keyword: BottomWaitAfterLift_xxx
- (Add) Note keyword: WaitAfterLift_xxx
- (Change) Uniz IBEE: Remove light-off delay and implement wait time keywords
- **macOS:** (#236)
- (Remove) osx legacy packages from build and downloads
- (Fix) macOS: Simplify the libcvextern.dylib and remove libtesseract dependency
- (Fix) macOS: Include libusb-1.0.0.dylib
- Note: `brew install libusb` still required
- **UI:**
- (Fix) Refresh gcode does not update text on UI for ZIP, CWS, ZCODEX files
- (Fix) Operations: Import a .uvtop file by drag and drop into the UI would not load the layer range
- (Change) When convert a file, the result dialog will have Yes, No and Cancel actions, where No will open the converted file on current window, while Cancel will not perform any action (The old No behaviour)
- (Upgrade) AvaloniaUI from 0.10.4 to 0.10.5
- (Improvement) VDT: Implement a new key for better auto convert files between with latest version of Tango
- (Change) Exposure time finder: Bar fence offset from 2px to 4px
* **File formats:**
* Add Voxeldance Tango (VDT)
* Add Makerbase MKS-DLP (MDLPv1)
* Add GR1 Workshop (GR1)
* Add Creality CXDLP (CXDLP)
* When decoding a file and have a empty resolution (Width: 0 or Height: 0) it will auto fix it by get and set the first layer image resolution to the file
* Fix when decoding a file it was already set to require a full encode, preventing fast saves on print parameters edits
* **GUI:**
* When file resolution dismatch from layer resolution, it is now possible to auto fix it by set the layer resolution to the file
* When loading a file with auto scan for issues disabled it will force auto scan for issues types that are instant to check (print height and empty layers), if any exists it will auto select issues tab
* **(Add) PrusaSlicer printers:**
* Creality HALOT-SKY CL-89
* Creality HALOT-SKY CL-60
* (Improvement) Tool - Adjust layer height: Improve the performance when multiplying layers / go with higher layer height
* (Fix) PrusaSlicer Printer - Wanhao D7: Change the auto convertion format from .zip to .xml.cws
* **Core:**
* Fix some improper locks for progress counter and change to Interlocked instead
* Fix a bug when chaging layer count by remove or add layers it will malform the file after save and crash the program with some tools and/or clipboard
* Fix when a operation fails by other reason different from cancelation it was not restoring the backup
* When manually delete/fix issues it will also backup the layers
* **LayerManager:**
* LayerManager is now readonly and no longer used to transpose layers, each FileFormat have now a unique `LayerManager` instance which is set on the generic constructor
* Implemented `List<Layer>` methods to easy modify the layers array
* Changing the `Layers` instance will now recompute some properties, call the properties rebuild and forced sanitize of the structure
* Better reallocation methods
* **Clipboard Manager:**
* Add the hability to do full backups, they will be marked with an asterisk (*) at clipboard items list
* When a partial backup is made and it backups all the layers it will be converted to full backup
* Clipboard can now restore a snapshot directly with `RestoreSnapshot`
* Prevent restore the initial backup upon file load and when clearing the clipboard
* Clip's that change the layer count will perform a full backup and also do a fail-safe backup behind if previous clip is not a full backup
* **Pixel dimming:**
* Allow to load an image file as a pattern (Do not use very large files or it will take much time to dump the data into the textbox)
* Empty lines on patterns will be discarded and not trigger validation error
* **Core:**
* Write "Unhandled Exceptions" to an "errors.log" file at user settings directory
* Increase layer height max precision from 2 to 3 decimals
* **Settings - Layer Preview:**
* Allow to set hollow line thickness to -1 to fill the area
* Add tooltip for "Auto rotate on load": Auto rotate the layer preview on file load for a landscape viewport
* Add option to masks outline color and thickness
* Add option to clear ROI when adding masks
* Add option "Auto flip on load": Auto flip the layer preview on file load if the file is marked to print mirrored on the printer LCD
* **Layer preview:**
* Add selectable rotation directions 90º (CW and CCW)
* Add preview flip (CTRL+F) horizontally and/or vertically
* Add maskable regions to process on a layer (SHIFT + Alt + Click) on a area
* ROI: Shortcut "Shift + left click" now also selects hollow black areas inside a white perimeter
* ROI: Shortcut "ESC + Shift" to clear only the ROI and leave masks in
* Fix a crash when using the pixel picker tool outside image bounds
* **Pixel editor:**
* Change drawings brush diameter limit from 255 to 4000 maximum
* When using layers below go lower than layer 0 it no longer apply the modifications
* **File formats:**
* Add an internal GCodeBuilder to generate identical gcode within formats with auto convertion, managing features and parsing information
* Internally rearrange formats properties and pass values to the base class
* Fix "Save As" filename when using formats with dual extensions
* CBDDLP and CTB: "LightPWM" was setting "BottomLightPWM" instead
* CWS: Fix problem with filenames with dots (.) and ending with numbers (#171)
* CWS: Improved the enconding and decoding performance
* CWS: Implement all available print paramenters and per layer, missing values are got from gcode interpretation
* CWS: Use set "light off delay" layer value instead of calculating it
* CWS: Get light off delay per layer parsed from gcode
* CWS - RGB flavour (Bene4 Mono): Warn about wrong resolution if width not multiples of 3 (#171)
* ZCode: Allow to set Bottom and Light intensity (LightPWM) on paramters and per layer
* ZCode: Allow to change bottom light pwm independent from normal light pwm
* LGS: Light off and bottom light off was setting the value on the wrong units
* UVJ: Unable to set per layer parameters
* **Issues:**
* When computing islands and resin traps together, they will not compute in parallel anymore to prevent CPU and tasks exaustion, it will calculate islands first and then resin traps, this should also speed up the process on weaker machines
* Gather resin trap areas together when computing for other issues to spare a decoding cycle latter
* When using a threshold for islands detection it was also appling it to the overhangs
* Fix the spare decoding conditional cycle for partial scans
* Change resin trap search from parallel to sync to prevent fake detections and missing joints at cost of speed (#13)
* **Tools:**
* Add layer selector: 'From first to current layer' and 'From current to last layer'
* I printed this file: Multiplier - Number of time(s) the file has been printed. Half numbers can be used to consume from a failed print. Example: 0.5x if a print canceled at 50% progress
* Pixel dimming: Increase wall thickness default from 5px to 10px
* Import layers: Importing layers was not marking layers as modified, then the save file won't save the new images in, to prevent other similar bugs, all layers that got replaced will be auto marked as modified
* (Add) Setting: Auto repair layers and issues on file load
* (Improvement) When ComputeIssuesOnLoad is enabled and issues are detected it will switch the view to the Issues tab
* **(Improvement) Raft Relief:**
* Add parameter "Mask layer index": Defines the mask layer to use and ignore the white blobs on the raft
* Increase the automatic support detection allowance on more odd shapes
* Prevent layer 0 to be used as a mask, if so it will quit
* If the ignored layer number are set and equal or larger than mask layer index it will quit
* Fix progress count when using ignored layers
* Change supports dilate kernel from Elipse to Rectangle for a better coverage of the pad
* Change the default values for a more conservative values
* (Fix) When both ComputeIssuesOnLoad and ComputeIssuesOnClickTab are enabled, clicking the issues tab will rescan for issues
* (Fix) Tools: Set a default profile insn't working
* (Fix) Redoing the last operation was not recovering the custom ROI on the operation
* (Improvement) Cache per layer and global used material for faster calculations
* (Improvement) Better internal PrintTime management
* **(Improvement) GUI:**
* Show per layer used material percentage compared to the rest model
* Show total of millimeters cured per layer if available
* Show bounds and ROI in millimeters if available
* Show display width and height below resolution if available
* Don't split (Actions / Refresh / Save) region when resize window and keep those fixed
* **(Improvement) Calibrate - Grayscale:**
* Add a option to convert brightness to exposure time on divisions text
* Adjust text position to be better centered and near from the center within divisions
* (Fix) Calculate the used material with global layer height instead of calculate height from layer difference which lead to wrong values in parallel computation
* (Fix) Converting files were not setting the new file as parent for the layer manager, this affected auto convertions from SL1 and lead to crashes and bad calculations if file were not reloaded from the disk (#150, #151)
* (Fix) PositionZ rounding error when removing layers
* (Add) Computed used material milliliters for each layer, it will dynamic change if pixels are added or subtracted
* (Add) Computed used material milliliters for whole model, it will dynamic change if pixels are added or subtracted
* (Improvement) Round cost, material ml and grams from 2 to 3 decimals
* (Improvement) Operation profiles: Allow to save and get a custom layer range instead of pre-defined ranges
* **(Improvement)** PhotonWorkshop files: (#149)
* Fill in the display width, height and MaxZ values for the printers
* Fill in the xy pixel size values for the printers
* Change ResinType to PriceCurrencyDec and Add PriceCurrencySymbol
* Change Offset1 on header to PrintTime
* Change Offset1 on layer table as NonZeroPixelCount, the number of white pixels on the layer
* Fix LayerPositionZ to calculate the correct value based on each layer height and fix internal layer layer height which was been set to position z
* Force PerLayerOverride to be always 1 after save the file
* (Fix) Actions - Remove and clone layers was selecting all layer range instead of the current layer
* (Fix) Redo last action was not getting back the layer range on some cases
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
* **PrusaSlicer:**
* **In this release is recommended to discard your printer and refresh it with uvtools updated printer or replace notes over**
* (Add) FILEFORMAT_XXX variable to auto-convert to that file format once open in UVtools
* (Update) Print profiles fields with new PrusaSlicer version
* (Remove) LayerOffDelay from printer notes and use only the LightOffDelay variable instead, both were being used, to avoid redundacy LayerOffDelay was dropped. Please update your printer accordingly!
* (Remove) FLIP_XY compability from printers
* (Remove) AntiAlias variable from printers
* **(Add) Settings - Automations:**
* Auto save the file after apply any automation(s)
* Auto convert SL1 files to the target format when possible and load it back
* Auto set the extra 'light-off delay' based on lift height and speed.
* (Add) Allow all and future formats to convert between them without knowing each other (Abstraction)
* (Add) XYResolution and XYResolutionUm property to file formats
* (Add) Calculator - Optimal model tilt: Calculates the optimal model tilt angle for printing and to minimize the visual layer effect
* (Add) Bottom layer count to the status bar
* **(Add) FileFormat propertiers:**
* MirrorDisplay: If images need to be mirrored on lcd to print on the correct orientation (If available)
* MaxPrintHeight: The maximum Z build volume of the printer (If available)
* (Add) ZCodex: Print paramenter light-off delay"
* (Add) SL1: Implement missing keys: host_type, physical_printer_settings_id and support_small_pillar_diameter_percent
* (Change) File formats: Round all setters floats to 2 decimals
* (Change) Island Repair: "Remove Islands Below Equal Pixels" limit from 255 to 65535 (#124)
* (Change) LightOffTime variables to LayerOffDelay
* (Fix) Files with upper case extensions doesn't load in
* **(Fix) SL1:**
* Prevent error when bottle volume is 0
* bool values were incorrectly parsed
* (Fix) **ZIP:**
* Material volume was set to grams
* Bed Y was not being set
Tiago Conceição