- **File formats:**
- (Add) OSF (Vlare Open File Format)
- (Fix) CTB Encrypted: Bottom Retract Height for TSMC was constraining incorrectly with the normal total retract height
- (Fix) CWS: Only issue `;<Slice>` command when the exposure is about to happen (#514)
- **GCode:**
- (Add) Command `CommandWaitSyncDelay` for movement wait sync delay instead of depending on G4 wait command
- (Fix) Wrong parsing and set of wait times when using a wait after lift / wait before retract
- (Improvement) Auto update: Make sure the download url exists before attempt the download, if not, instead it will prompt for manual download and update
- (Improvement) MacOS: Remove `com.apple.quarantine` flag from the auto downloaded files
- (Upgrade) .NET from 6.0.7 to 6.0.8
- (Upgrade) AvaloniaUI from 0.10.17 to 0.10.18
- **Tools**
- **PCB Exposure:**
- (Add) Able to choose the size midpoint rounding method (#520)
- (Fix) Allow to flash alone D03 commands (#520)
- (Fix) Correct line thickness to have at least 1px error (#523)
- (Improvement) Layer arithmetic: Use ; to split and start a new arithmetic operation
- (Add) Cmd: Convert command now allow to pass 'auto' as target type to auto convert specific files, valid for SL1 files configured with FILEFORMAT_xxx (#522)
- (Add) GCode: Command to sync and wait for movement completion [Only enabled for cws format] (#514)
- (Add) VDT: Transition layer count
- (Upgrade) AvaloniaUI from 0.10.16 to 0.10.17
- **PCB Exposure:**
- (Add) Parse of deprecated commands (G70, G71, G90, G91)
- (Fix) Able to have parameterless macro apertures (#503)
- **UI:**
- (Add) Menu -> File -> Free unused RAM: Force the garbage collection of all unused objects within the program to free unused memory (RAM).
It's never required for the end user run this. The program will automatically take care of it when required.
This function is for debug purposes.
- (Improvement) Window title bar: Show elapsed minutes and seconds instead of total seconds minutes and second
- (Fix) Tool - Mask: Loaded image resolution shows as (unloaded)
- (Fix) Applying a large set of modifications in layer depth with pixel editor cause huge memory spike due layer aggregation without disposing, leading to program crash on most cases where RAM is insufficient (#506)
- (Upgrade) AvaloniaUI from 0.10.15 to 0.10.16
- **PCB Exposure:**
- (Add) Able to select multiple files and create a layer per file or merge them into one layer
- (Add) Able to import files from a zip file
- (Improvement) Round pixel coordinates and line thickness
- (Improvement) Better position precision for primitives
- (Improvement) Disable the ok button if no files were selected
- (Change) Do not auto mirror based on printer lcd mirror type
- (Fix) Limit line thickness to 1px minimum
- (Fix) Allow leading zero omit from XY coordinates (#492)
- (Fix) Mirror option was shifting the board position
- (Add) Calibrate - Blooming effect: Generates test models with various strategies and increments to measure the blooming effect
- (Add) Setting: Issues - Default order by, changes the default order on the issues list (#482)
- (Improvement) CTBv4 and encrypted: Fetch `BottomWaitTimes` virtual property from first bottom layer that has at least 2 pixels (#483)
- (Fix) Linux: Enable desktop integration for AppImages (#490)
- (Fix) Extracting zip contents inside folders would cause a error and not extract those contents
- (Upgrade) AvaloniaUI from 0.10.14 to 0.10.15 [Fixes auto-size problems]
- (Add) Information about the loaded file when copying from the about box
- (Improvement) Tools are now disabled on the menu if not supported by the file format once each file load (#476)
- (Fix) Tool - Edit tool parameters: Overlap label on "per layer override" mode (#478)
- (Fix) Corruption of `GZip` and `Deflate` layer compression methods
- **Core:**
- (Add) Getter `FileFormat.DisplayPixelCount` Gets the display total number of pixels (ResolutionX * ResolutionY)
- (Add) Getter `Layer.NonZeroPixelRatio` Gets the ratio between non zero pixels and display number of pixels
- (Add) Getter `Layer.NonZeroPixelPercentage` Gets the percentage of non zero pixels relative to the display number of pixels
- (Add) Getter `Layer.PreviousHeightLayer()` Gets the previous layer with a different height from the current, returns null if no previous layer
- (Add) Getter `Layer.NextHeightLayer()` Gets the next layer with a different height from the current, returns null if no next layer
- (Add) Method `Layer.GetPreviousLayerWithAtLeastPixelCountOf()` Gets the previous layer matching at least a number of pixels, returns null if no previous layer
- (Add) Method `Layer.GetNextLayerWithAtLeastPixelCountOf()` Gets the next layer matching at least a number of pixels, returns null if no next layer
- (Add) Method `Operation.GetRoiOrVolumeBounds()` returns the selected ROI rectangle or model volume bounds rectangle
- (Add) Documentation around `Operation` methods
- (Fix) Open files in partial mode when the resolution is not defined would cause a `NullPointerException` (#474)
- **Suggestion: Wait time before cure**
- (Add) Proportional maximum time change: Sets the maximum allowed time difference relative to the previous layer (#471)
- (Add) Proportional mass get modes: Previous, Average and Maximum relative to a defined height (#471)
- (Change) Proportional set type sets fallback time to the first layer
- (Fix) Proportional set type was taking current layer mass instead of looking to the previous cured layer (#471)
- **Tools:**
- **Edit print parameters:**
- (Change) Incorporate the unit label into the numeric input box
- (Change) Allow TSMC speeds to be 0 as minimum value (#472)
- (Fix) PCB Exposure: The thumbnail has random noise around the image
- **Settings:**
- (Add) Tools: "Always prompt for confirmation before execute the operation"
- (Fix) Changing layer compression method when no file is loaded would cause a error
- **UI:**
- (Add) Holding Shift key while drag and drop a .uvtop file will try to execute the operation without showing the window or prompt
- (Add) Drag and drop a .cs or .csx file into UVtools will load and show the scripting dialog with the file selected
- (Add) Errors that crash application will now show an report window with the crash information and able to fast report them
- (Add) "Version" key and value on registry to tell the current installed version (Windows MSI only)
- (Upgrade) AvaloniaUI from 0.10.13 to 0.10.14
- (Upgrade) .NET from 6.0.4 to 6.0.5
- **Tools:**
- (Add) PCB exposure: Converts a gerber file to a pixel perfect image given your printer LCD/resolution to exposure the copper traces.
- (Improvement) Export settings now indent the XML to be more user friendly to edit
- (Improvement) Layer import: Allow to have profiles
- (Improvement) Layer import: Validates if selected files exists before execute
- (Fix) Lithophane: Disallow having start threshold equal to end threshold
- (Add) Windows explorer: Right-click on files will show "Open with UVtools" on context menu which opens the selected file on UVtools (Windows MSI only)
- (Improvement) Island and overhang detection: Ignore detection on all layers that are in direct contact with the plate (On same first layer position)
- (Improvement) Cmd: Better error messages for convert command when using shared extensions and no extension
- **Shortcuts:**
- (Add) **Delete:** While on layer preview and with roi or mask(s) selected, will remove the selected area from layer
- (Add) **Alt + Delete:** While on layer preview and with roi or mask(s) selected, will remove the selected area from all layers
- (Add) **Ctrl + Delete:** While on layer preview, will remove the current layer
- (Add) **Insert:** While on layer preview and with roi or mask(s) selected, will keep only the selected area in layer
- (Add) **Alt + Insert:** While on layer preview and with roi or mask(s) selected, will keep only the selected area in all layers
- (Add) **Ctrl + Insert:** While on layer preview, will clone the current layer
- (Add) **Home:** While on layer preview will go to first layer
- (Add) **End:** While on layer preview will go to last layer
- (Add) **Page up:** While on layer preview will skip +10 layers
- (Add) **Page down:** While on layer preview will skip -10 layers
- (Add) Tool - Lithophane: Generate lithophane from a picture
- (Fix) Pixel arithmetic: When run with masks it produce a incorrect outcome
- (Fix) CXDLP: Layer area table miscalculation, causing slow down prints
- **Settings:**
- (Add) Remove source file after automatic conversion (#444)
- (Add) Remove source file after manual conversion (#444)
- (Add) **Average resin bottle cost:** The average cost per one resin bottle of 1000ml.
Used to calculate the material cost when the file lacks that information.
Use 0 to disable this feature and only show the cost if file have that information.
If this value is changed, you need to reload the current file to update the cost.
- (Change) Move "Expand and show tool descriptions by default" to From `General` to `Tools` tab (Setting will reset to default)
- **File formats:**
- (Add) Property `StartingMaterialMilliliters`: Gets the starting material milliliters when the file was loaded
- (Add) Property `StartingMaterialCost`: Gets the starting material cost when the file was loaded
- (Add) Property `MaterialMilliliterCost`: Gets the material cost per one milliliter
- (Improvement) Update `MaterialCost` when `MaterialMilliliters` changes (#449)
- **Raft relief:**
- (Add) Linked lines: Remove the raft, keep supports and link them with lines
- (Improvement) Change the supports detection parameters to be more effective and precise on detect the starting layer
- (Fix) Brightness percentage not getting updated
- (Fix) Remove anti-aliased edges from Tabs
- (Improvement) Core: Minor clean-up
- (Fix) Issue repair error when 'Auto repair layers and issues on file load' is enabled (#446)
- (Fix) UI: Selecting a object with ROI when flip is verically, will cause 1px up-shift on the preview
- (Fix) macOS permission error due loss of attributes on the build script, WSL have bug with mv, using ln&rm instead
- **AnyCubic file format:**
- (Fix) Lift height and speed are not being correctly set on old version, keeping a constant value (#441)
- (Fix) Retract speed getter was not return value from TSMC if using version 516
- **Tool - Infill:**
- (Add) Waves infill type
- (Add) Concentric infill type
- (Add) Gyroid infill type (#443)
- (Change) Increase the default spacing from 200px to 300px
- (Improvement) Fastter infill processing by use the model bounds
- (Add) `FormatSpeedUnit` property to file formats to get the speed unit which the file use internally
- (Fix) UI: ROI rectangle can overlap scroll bars while selecting
- **Core:**
- (Add) Machine presets and able to load machine collection from PrusaSlicer
- (Improvement) Core: Reference EmguCV runtimes into core instead of the UI project
- **File formats:**
- **CXDLP:**
- (Add) Detection support for Halot One Pro
- (Add) Detection support for Halot One Plus
- (Add) Detection support for Halot Sky Plus
- (Add) Detection support for Halot Lite
- (Improvement) Better handling and detection of printer model when converting
- (Improvement) Discovered more fields meanings on format
- (Fix) Exposure time in format is `round(time * 10, 1)`
- (Fix) Speeds in format are in mm/s, was using mm/min before
- (Add) JXS format for Uniformation GKone [Zip+GCode]
- (Improvement) Saving and converting files now handle the file backup on Core instead on the UI, which prevents scripts and other projects lose the original file in case of error while saving
- (Fix) After load files they was flagged as requiring a full encode, preventing fast save a fresh file
- **UVtoolsCmd:**
- Bring back the commandline project
- Consult README to see the available commands and syntax
- Old terminal commands on UVtools still works for now, but consider switch to UVtoolsCmd or redirect the command using `UVtools --cmd "commands"`
- **Tools:**
- **Change print resolution:**
- (Add) Allow to change the display size to match the new printer
- (Add) Machine presets to help set both resolution and display size to a correct printer and auto set fix pixel ratio
- (Improvement) Real pixel pitch fixer due new display size information, this allow full transfers between different printers "without" invalidating the model size
- (Improvement) Better arrangement of the layout
- (Add) Infill: Option "Reinforce infill if possible", it was always on before, now default is off and configurable
- (Improvement) Always allow to export settings from tools
- **GCode:**
- (Improvement) After print the last layer, do one lift with the same layer settings before attempt a fast move to top
- (Improvement) Use the highest defined speed to send the build plate to top after finish print
- (Improvement) Append a wait sync command in the end of gcode if needed
- (Fix) When lift without a retract it still output the motor sync delay for the retract time and the wait time after retract
- **PrusaSlicer:**
- (Add) Printer: Creality Halot One Pro CL-70
- (Add) Printer: Creality Halot One Plus CL-79
- (Add) Printer: Creality Halot Sky Plus CL-92
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality Halot Lite CL-89L
- (Add) Printer: Creality CT133 Pro
- (Add) Printer: Creality CT-005 Pro
- (Add) Printer: Uniformation GKone
- (Add) Printer: FlashForge Foto 8.9S
- (Add) Printer: Elegoo Mars 2
- (Improvement) Rename all Creality printers
- (Fix) Creality model in print notes
- (Add) Raft relief: Tabs type - Creates tabs around the raft to easily insert a tool under it and detach the raft from build plate
- (Add) Linux AppImage binaries (You won't get them with auto-update, please download AppImage once before can use auto-update feature in the future)
- (Change) Rename "layer compression method" to "layer compression codec", please redefine the codec setting if you changed before
- (Improvement) Linux and macOS releases are now compiled, published and packed under Linux (WSL). Windows release still and must be published under windows.
- **Benchmark:**
- (Add) PNG, GZip, Deflate and LZ4 compress tests
- (Change) Test against a known image instead of random noise
- (Change) Single-thread tests from 100 to 200 and multi-thread tests from 1000 to 5000
- (Improvement) Same image instance is shared between tests instead of create new per test
- (Fix) Encode typo
- **Core:**
- (Add) Layer compression method: Allow to choose the compression method for layer image
- **PNG:** Compression=High Speed=Slow (Use with low RAM)
- **GZip:** Compression=Medium Speed=Medium (Optimal)
- **Deflate:** Compression=Medium Speed=Medium (Optimal)
- **LZ4:** Compression=Low Speed=Fast (Use with high RAM)
- (Improvement) Better handling on cancel operations and more immediate response
- (Fix) Extract: Zip Slip Vulnerability (CWE-22)
- **File formats:**
- (Improvement) Better handling of encode/decoding layers from zip files
- (Fix) ZCode: Canceling the file load can trigger an error
- (Fix) VDA: Unable to open vda zip files
- **Tools:**
- (Improvement) Allow operations to be aware of ROI and Masks before execution (#436)
- (Improvement) Scripting: Allow save and load profiles (#436)
- (Fix) Adjust layer height: When using the Offset type the last layer in the range was not taken in account (#435)
- **UI:**
- (Improvement) Allow layer zoom levels of 0.1x and 64x but constrain minimum zoom to the level of image fit
- (Improvement) Update change log now shows with markdown style and more readable
- (Fix) Windows MSI upgrade to this version (#432)
- (Fix) Auto-updater for Mac ARM, was downloading x64 instead
- **(Add) Suggestions:**
- A new module that detect bad or parameters out of a defined range and suggest a change on the file, those can be auto applied if configured to do so
- **Avaliable suggestions:**
- **Bottom layer count:** Bottom layers should be kept to a minimum, usually from 2 to 3, it function is to provide a good adhesion to the first layer on the build plate, using a high count have disadvantages.
- **Wait time before cure:** Rest some time before cure the layer is crucial to let the resin settle after the lift sequence and allow some time for the arm settle at the correct Z position as the resin will offer some resistance and push the structure.
This lead to better quality with more successful prints, less lamination problems, better first layers with more success of stick to the build plate and less elephant foot effect.
- **Wait time after cure:** Rest some time after cure the layer and before the lift sequence can be important to allow the layer to cooldown a bit and detach better from the FEP.
- **Layer height:** Using the right layer height is important to get successful prints:
Thin layers may cause problems on adhesion, lamination, will print much slower and have no real visual benefits.
Thick layers may not fully cure no matter the exposure time you use, causing lamination and other hazards. Read your resin dtasheet to know the limits.
Using layer height with too many decimal digits may produce a wrong positioning due stepper step loss and/or Z axis quality.
- **Core:**
- Convert the project to Nullable aware and "null-safe"
- **File Formats:**
- (Add) `Volume` property to get the total model volume
- (Add) `SanitizeLayers` method to reassign indexes and force attribute parent file
- (Improvement) Merge `LayerManager` into `FileFormat` and cleanup: This affects the whole project and external scripts.
If using scripts please update them, search for `.LayerManager.` and replace by `.`
- (Change) Chitubox encrypted format can now be saved as normal
- (Fix) Converted files layers was pointing to the source file and related to it
- **Layers:**
- (Add) Methods: `ResetParameters`, `CopyParametersTo`, `CopyExposureTo`, `CopyWaitTimesTo`
- (Improvement) `IsBottomLayer` property will also return true when the index is inside bottom layer count
- **Scripting:**
- (Add) Configuration variable: `MinimumVersionToRun` - Sets the minimum version able to run the script
- (Improvement) Allow run scripts written in C# 10 with the new namespace; style as well as nullables methods
- (Improvement) Convert scripts to use Nullable code
- **UI:**
- (Add) Fluent Dark theme
- (Add) Default Light theme
- (Add) Default Dark theme
- (Change) Use fontawesome and material design to render the icons instead of static png images
- (Change) Some icons
- (Change) Move log tab to clipboard tab
- (Change) Tooltip overlay default color
- (Improvement) Windows position for tool windows, sometimes framework can return negative values affecting positions, now limits to 0 (#387)
- (Fix) Center image icon for layer action button
- (Fix) Center image icon for save layer image button
- **Tools:**
- (Add) Layer re-height: Offset mode, change layers position by a defined offset (#423)
- (Improvement) Rotate: Unable to use an angle of 0
- (Improvement) Remove layers: Will not recalcualte and reset properties of layers anymore, allowing removing layers on dynamic layer height models and others
- (Improvement) Clone layers: Will not recalcualte and reset properties of layers anymore, allowing cloning layers on dynamic layer height models and others
- (Fix) Exposure time finder: Very small printers may not print the stock object as it is configured, lead to a unknown error while generating the test. It will now show a better error message and advice a solution (#426)
- **Terminal:**
- (Add) More default namespaces
- (Improvement) Set a MinHeight for the rows to prevent spliter from eat the elements
- (Change) Set working space to the MainWindow instead of TerminalWindow
- **(Upgrade) .NET from 5.0.14 to 6.0.3**
- This brings big performance improvements, better JIT, faster I/O operations and others
- Read more: https://devblogs.microsoft.com/dotnet/performance-improvements-in-net-6
- Due this macOS requirement starts at 10.15 (Catalina)
- Read more: https://github.com/dotnet/core/blob/main/release-notes/6.0/supported-os.md
- (Add) Native support for MacOS ARM64 architecture (Mac M1 and upcomming Mac's) (#187)
- (Exchange) Dependency Newtonsoft Json by System.Text.Json to parse the json documents
- (Remove) "Automations - Light-off delay" in favor of new suggestion "wait time before cure" module
- (Fix) File - Send to: Winrar or 7zip have a wrong extension on the list (uvt) when should be (uvj)
- (Upgrade) AvaloniaUI from 0.10.12 to 0.10.13
- **File formats:**
- (Add) Transition layer count to the supported files and auto compute transition time on corresponding layers in software mode
- (Add) `HaveTransitionLayers`, `TransitionLayersType`, `BottomLayers`, `NormalLayers`, `TransitionLayers`, `TsmcLayers` properties
- (Add) Layer: `IsTransitionLayer` property
- (Add) SL1: Keyword `TransitionLayerCount_xxx` - Sets the number of transition layers
- (Improvement) CTB, PHZ, FDG: Implement the `ModifiedTimestampMinutes` field, it was the MysteriousId before as an unknown field
- (Fix) CWS: Open in partial mode will cause an exception and prevent file from load
- **CCode:**
- (Add) Allow inverse lifts to work as an retract
- (Fix) Parsing of WaitTimeAfterLift was incorrect when lacking a lift sequence
- (Fix) Layers lacking an exposure time was defaulting to global time, now defaults to 0
- (Fix) Layers without a LED ON (M106) was setting `LightPWM` to the max value (255), now defaults to 0
- **Tools:**
- **Timelapse:**
- (Add) Information: Raise Layer count equivalence
- (Add) Information: Additional lifts to be generated
- (Add) Option: Ensure the last layer - If enabled, it will generate an obligatory layer to cover the last layer
- (Improvement) Optimize lift for virtual layer mode, allowing set a slow and fast lift / retract by using another virtual layyer to emulate a lift
- (Improvement) Allow to define slow and fast speed for virtual layer mode even if TSMC isn't supported
- (Add) Fade exposure time: Setting 'Disable firmware transition layers' - Attempt to disable firmware strict transition layers in favor of this tool
- (Add) Calibration tests: Attempt to auto disable the firmware transifiton layers
- (Change) Edit print parameters: Allow set `BottomLiftHeight` and `LiftHeight` to 0mm
- **UI:**
- (Improvement) Disallow drop files into UI when is processing data / disabled and prevent crashing from that action
- (Improvement) Information tab visibility and MinHeight for data grids
- (Improvement) Hide/show GCode tab when necessary (dependent on file format)
- (Improvement) The 'save as' will show the new file into 'Open recent' files
- **PrusaSlicer printers:**
- (Add) Elegoo Jupiter
- (Add) EPAX X1 4KS
- (Add) EPAX DX1 Pro
- (Add) EPAX DX10 Pro 5K
- (Add) EPAX DX10 Pro 8K
- (Add) EPAX E10 8K
- (Add) EPAX X133 6K
- **Core:**
- (Add) Utilities methods (`MinimumSpeed`, `MaximumSpeed`, `CreateMat`, `CreateMatWithDummyPixel`, `FileFormat.CopyParameters`)
- (Improvement) Issues - Print Height: Group all layers outside the valid print height
- **FileFormats:**
- (Add) Generic / Phrozen ZIP format
- (Add) Information/modifier to file formats to tell whatever is possible to use custom PositionZ per layer
- (Add) Safe checks in order to run some tools, related to the previous "PositionZ" point
- (Improvement) if blank, allow the previous layer to have a higher Z position than the successor layer
- (Improvement) SL1: Implement the missing keys from new features of PrusaSlicer 2.4.0
- (Fix) Calling a partial save action without a progress instance would cause a crash
- (Fix) GCode: Unable to parse the "Wait time after lift" when a second lift (TSMC) was present, leading to a sum on "Wait time before cure"
- **Tools:**
- (Add) Timelapse: Raise the build platform to a set position every odd-even height to be able to take a photo and create a time-lapse video of the print
- (Add) Scripting: ScriptToggleSwitchInput
- **Raise on print finish:**
- (Add) Reapply check and prevent run the tool in that case
- (Fix) It was incorrectly marked to be able to run in partial mode
- (Fix) The dummy pixel was beeing set to a wrong location
- **Layers:**:
- (Change) When set Wait times to a negative value, it will set the global wait time value accordingly
- (Change) Allow ExposureTime to be 0
- **Commandline arguments**
- (Add) --run-operation \<input_file\> \<operation_file.uvtop\>
- (Add) --run-script \<input_file\> \<script_file.cs\>
- (Add) --copy-parameters \<from_file\> \<to_file\>
- **UI:**
- (Add) When open a file with missing crucial information, prompt the user to fill in that information (Optional)
- (Add) Warn user about misfunction when open a file with invalid layer height of 0mm
- (Improvement) Layer information: Only show the "Exposure time" when its availiable on the file format
- (Improvement) When a file is about to get auto-converted once loaded and the output file already exists, prompt user for overwrite action
- (Improvement) Set default culture info at top most of the program to avoid strange problems with commandline arguments
- (Upgrade) .NET from 5.0.13 to 5.0.14
- (Downgrade) OpenCV from 4.5.5 to 4.5.4 due the crash while detecting islands (Linux and MacOS) (#411, #415, #416)
- **Pixel Arithmetic:**
- (Add) Corrode: Number of passes
- (Change) Corrode: Noise area default from 3px² to 1px²
- (Change) Fuzzy skin preset: Wall thickness from 6px to 4px
- (Change) Fuzzy skin preset: Max noise offset: 64
- (Add) Core: More helper functions: Area, Volume, LastBottomLayer, BottomLayersHeight, SetNoDelays, SetWaitTimeBeforeCureOrLightOffDelay
- (Change) Display the current layer volume instead of area
- (Fix) Having a first empty layer will miscalculate the model rectangle bounds
- (Fix) Tool - Calculator - Model tilt: Change formula to use arctan instead of tanh
- (Upgrade) OpenCV from 4.5.4 to 4.5.5
- (Upgrade) AvaloniaUI from 0.10.11 to 0.10.12 (#378)
- **PrusaSlicer:**
- (Fix) Printer: AnyCubic Photon Mono 4K - bed origin (#369)
- (Fix) Printer: AnyCubic Photon Mono X 6K - bed origin (#369)
- (Fix) Anycubic files: Soft-save on versions below 516 can corrupt the file (#396)
- (Fix) Pixel editor: Place a line on a mirrored virtual layer was previewing the line in the wrong orientation (#399)
- **Pixel Arithmetic:**
- (Add) Corode: Noise pixel area, defaulting to 3px2
- (Change) Corode: Cryptonumeric random to normal random to speed up calculation
- (Change) Fuzzy skin preset: Set a ignore threshold area of 5000px2
- (Improvement) Masking performance and auto crop the layer to speed up the processing when using an "Apply to" other than "All"
- (Fix) Some "Apply to" methods was creating a wrong mask with some operators
- **CXDLP V3:**
- (Fix) Checksum (CRC32) (#389)
- (Fix) Software name and material name serialization
- **Tool - Morph:**
- (Add) Operator: White tophat - Removes small isolated pixels and only return its affected pixels (Image - Noise removal)
- (Add) Operator: Black tophat - Closes small holes inside the objects and only return its affected pixels (Gap closing - Image)
- (Add) Operator: Hit or miss - Finds pixels in a given kernel pattern
- (Remove) Operator: 'Isolate features' as that is the same as the 'White tophat' and is already inbuilt into OpenCV
- **Kernels:**
- (Add) Option: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Add) Kernels are now saved with the operation profile
- **PrusaSlicer:**
- (Add) Support to slice files to be converted for encrypted CTB format
- (Add) Printer: Elegoo Mars 3 (#370)
- (Add) Printer: EPAX E10 5K
- (Add) Printer: EPAX X10 5K
- (Add) Printer: Phrozen Sonic Mini 8K
- (Add) Printer: Phrozen Sonic Mega 8K
- (Fix) Printer: AnyCubic Photon Mono 4K - display size (#369)
- (Fix) Printer: AnyCubic Photon Mono X 6K - display size (#369)
- (Add) Tool - Double exposure: Kernel configuration
- (Add) Tool - Pixel arithmetic: Kernel configuration
- (Add) Calibration - Elephant foot: Use dynamic kernel to enhancement the quality of the borders (#367)
- (Fix) Calibrate - Elephant foot: Redo (Ctrl + Z) the operation was crashing the application
- (Fix) CTB, PHZ, FDG: Converting files with a null machine name would cause a exception
- (Fix) Anycubic files: Bottom lift and speed were showing default values instead of real used value
- **Change resolution:**
- (Add) Presets: 5K UHD, 6K and 8K UHD
- (Add) Resulting pixel ratio information
- (Add) Fix the pixel ratio by resize the layers images with the proposed ratio to match the new resolution
- (Fix) New images could have noise when processed on linux and macos
- (Add) Layer slider debounce time to render the image [Configurable] (#343)
- (Fix) CTB v1: Incorrect getter for the LightOffDelay
- (Fix) Reallocating layers were not notifying nor updating the layer collection about the changes, leading to wrong layer count
- (Fix) Undo and redo now also reverts the file resolution when changed
- **File -> Send to -> Device**
- (Add) Progress with the transfered megabyte(s) and allow to cancel the transfer
- (Add) It will prompt for drive ejection [Configurable - On by default] [Windows only] (#340)
- (Add) File formats properties:
- `DisplayDiagonal`: Display diagonal size in millimeters
- `DisplayDiagonalInches`: Display diagonal size in inches
- `DisplayAspectRatio`: Display aspect ratio
- (Add) Detect incorrect image ratio upon file load and warn user about it
- **(Improvement) SL1:** (#314)
- Complete the SL1 file format with some defaults for convertions
- Change some data types from bool to byte as in recent prusaslicer changes
- (Upgrade) .NET from 5.0.10 to 5.0.11
- (Upgrade) AvaloniaUI from 0.10.7 to 0.10.8
- (Fix) PWS, PW0, PWM, PWMX, PWMO, PWMS: Incorrect set of layer height for the layer definition when using same positioned layers
- **Pixel arithmetic**
- (Add) Apply to - Model surface: Apply only to model surface/visible pixels
- (Add) Apply to - Model surface & inset: Apply only to model surface/visible pixels and within a inset from walls
- (Add) Preset: Fuzy skin
- (Improvement) Speed up the Corrode method
- (Change) Heal anti-aliasing threshold from 169 to 119
- **Calibration - Grayscale:**
- (Add) Enable or disable text
- (Fix) Calibration - Grayscale: Crash program when redo (Ctrl+Z)
- (Change) Some defaults to better values
- (Fix) Layer arithmetic: Crash program when redo (Ctrl+Z)
- **Issues:**
- (Add) Suction cups: Additional setting to specify the required minimum height to be flagged as a issue (#302)
- (Change) Allow touching bounds to have a bounding rectangle and zoom into the issue
- (Change) Disable the ability to copy issues row text from list as this is crashing the program
- (Change) Decrease cache count of the layers from x10 to x5 to free RAM
- (Fix) Touching bounds are reporting areas of 0
- (Fix) Draw crosshair for issues are called multiple times
- (Fix) Detection error when resin traps are enabled on some cases (#303)
- (Fix) Resin trap false-positives (#305)
- (Fix) When removing multiple islands at once only the first is cleared from the issue list
- **UI:**
- (Change) Tool - Resize icon
- (Change) Move "Crosshairs" button inside "Issues" button
- (Add) Tool - Morph - Offset crop: Like erode but discards the outer pixels
- (Fix) Corrected bottom lift unit label in light-off delay calculator (#304)
- (Add) Allow to choose custom locations for "Send to"
- (Improvement) Better random generation for benchmark
- (Fix) Outline - Hollow areas: Not outlining the second closing contour for contours with child
- (Fix) Pixel editor - Eraser: It was selecting the whole blob even if have inner parents
- **File formats:**
- Add and remove some image types that can be open
- (Add) `CanProcess` method to know if a file can be read under a format and to allow diferent formats with same extension
- (Fix) `LiftHeightTotal` and `RetractHeight` was rounding to no decimals and returning wrong values
- (Improvement) Round all float setters on `Layer` class
- (Improvement) Decode/encode RAM usage and performance by processing in batch groups
- **Pixel Dimming:** (#262)
- (Add) Option "Lightening pixels" to add brightness/lightening instead of dimming/subtract pixels
- (Fix) "Dim walls only" would reset body brightness by increase pixel brightness two times it value
- **Pixel Arithmetic:**
- (Change) Transpose "Pixel Dimming" to "Pixel Arithmetic"
- (Improvement) New options and manipulations
- **(Fix) Exposure time finder:**
- Generate top staircase based on selected measure (px or mm)
- Zebra bars when used in mm measures, it was using X density instead Y to calculate the thickness
- Move 'Unit of measure' to 'Object configuration'
- Custom text with wrong Y position when using out of portion resolutions/LCDs
- **CTBv4:**
- (Fix) More Unknown fields discovered and implemented
- (Fix) Reserved table is 384 bytes instead of 420
- (Fix) When full encoding it was forcing to change to version 3. This also affected convertions. (#263)
- (Fix) `BottomRetractHeight2` was being set to `BottomRetractSpeed2`
- (Fix) `RetractHeight2` was being set to `RetracSpeed2`
- (Fix) The PrintParametersV4 table address
- (Fix) Generates invalid files to open with Chitubox and printers (#263)
- (Fix) Better progress report
- **(Add) PrusaSlicer printer notes variables:**
- BottomLiftHeight2
- BottomLiftSpeed2
- LiftHeight2
- LiftSpeed2
- BottomRetractSpeed
- BottomRetractSpeed2
- BottomRetractHeight2
- BottomRetractSpeed2
- RetractHeight2
- RetractSpeed2
- **UI:**
- (Add) File - Open current file folder (Ctrl+Shift+L): Locate and open the folder that contain the current loaded file
- (Improvement) Hide some virtual extensions from file open dialog filters
- (Improvement) UI: Refresh active thumbnail when changed
- (Change) Icon for File - Open and Open in a new file
- (Change) Rename File - Extract to: Extract file contents
- (Upgrade) AvaloniaUI from 0.10.6 to 0.10.7
- (Fix) PW0, PWM, PWMX, PWMO, PWMS: Unable to decode some files with AntiAliasing (#143)
- **Command line arguments:**
- (Add) Convert files: UVtools.exe -c \<inputfile\> \<outputfile1/ext1\> [outputfile2/ext2]
- (Add) Extract files: UVtools.exe -e \<inputfile\> [output_folder]
- https://github.com/sn4k3/UVtools#command-line-arguments
- **File formats:**
- (Add) Implement TSMC (Two Stage Motor Control) for the supported formats
- (Add) Implement 'Bottom retract speed' for the supported formats
- (Add) LGS: Support for lgs120 and lg4k (#218)
- (Add) CTB: Special/virtual file extensions .v2.ctb, .v3.ctb, .v4.ctb to force a convertion to the set version (2 to 4). The .ctb is Version 3 by default when creating/converting files
- (Improvement) Better performance for file formats that decode images in sequential pixels groups
- **GCode:**
- (Improvement) Better parsing of the movements / lifts
- (Improvement) Better handling of lifts performed after cure the layer
- (Improvement) More fail-safe checks and sanitize of gcode while parsing
- (Improvement) CTBv3: Enable per layer settings if disabled when fast save without reencode
- (Upgrade) .NET from 5.0.8 to 5.0.9
- (Fix) PrusaSlicer printer: Longer Orange 4k with correct resolution and display size
- (Fix) Odd error when changing properties too fast in multi-thread
- **Windows MSI:**
- (Fix) Use the folder programs x64 instead of x86 for new installation path (#254)
- (Improvement) Mark program and all files as x64
- (Improvement) Add UVtools logo to side panel and top banner
- (Improvement) Add open-source logo to side panel
- (Improvement) License text aligment and bold title
- (Add) File format: OSLA / ODLP / OMSLA - Universal binary file format
- (Add) Calibration - Lift height: Generates test models with various strategies and increments to measure the optimal lift height or peel forces for layers given the printed area
- (Add) Layer Actions - Export layers to images (PNG, JPG/JPEG, JP2, TIF/TIFF, BMP, PBM, PGM, SR/RAS and SVG)
- (Add) About box: License with link
- (Add) Include a copy of the LICENSE on the packages
- (Improvement) File formats: Implement `Wait time before cure` properties on file formats with light-off delay, when used it will calculate the right light-off delay with that extra time and set to `LightOffDelay` property
- (Improvement) Change all date times to Utc instead of local
- (Fix) Tool - Flip: 'Both' were not working correctly
- (Fix) Linux: File 'UVtools.sh' with incorrect line break type, changed to \n (#258)
- **(Add) PrusaSlicer printers:**
- Creality HALOT-MAX CL-133
- Nova3D Elfin2
- Nova3D Elfin2 Mono SE
- Nova3D Elfin3 Mini
- Nova3D Bene4
- Nova3D Bene5
- Nova3D Whale
- Nova3D Whale2
- **About box:**
- (Add) Runtime information
- (Fix) Limit panels width and height to not overgrow
- **(Fix) macOS:**
- macOS version auto-upgrade (Will only work on future releases and if running v2.16.0 or greater)
- Demo file not loading
- Auto disable windows scaling factor when on Monjave or greater on new instalations
- (Add) Tool: Raise platform on print finish
- (Add) CXDLP: Support for Halot MAX CL-133
- (Improvement) Tools: Better handling/validation of tools that are unable to run with abstraction
- (Improvement) CWS: Simplify filenames inside the archive
- (Upgrade) EmguCV from 4.5.2 to 4.5.3
- (Change) Allow to set layer `LightPWM` to 0
- (Fix) Arrange dropdown arrow from layer image save icon to be at center
- **File formats:**
- (Add) Wait time before cure: The time to rest/wait in seconds before cure a new layer
- (Add) Wait time before after: The time to rest/wait in seconds after cure a new layer
- (Add) Wait time after lift: The time to rest/wait in seconds after a lift/peel move
- (Change) All gcode file formats dropped light-off delay field in favor of new 'Wait time before cure' field, setting light-off delay still valid but it redirects to the new field
- (Change) Reorder 'Light-off delay' before 'Exposure time'
- (Improvement) Recalculate the print time when a related property changes
- (Fix) Generic time estimation calculation was ignoring exposure times
- (Fix) Unable to load files with uppercase extensions
- (Fix) ZIP: Use G1 at end of gcode instead of G0
- (Fix) CWS: Use G1 for movements
- **(Fix) CXDLP:** (#240)
- Layer area calculation
- Validation checksum
- **(Fix) ZCODE:**
- Use G1 at end of gcode instead of G0 to prevent crash to top bug on firmware
- Put back the M18 motors off at end of gcode
- **GCode Builder/Parser:**
- (Add) Allow to choose between G0 and G1 for layer movements and end gcode
- (Fix) Safe guard: If the total print height is larger than set machine Z, do not raise/lower print on completeness
- (Fix) Light-off delay is the real delay time and not the calculated movement of the lifts plus the extra time
- (Improvement) Parse gcode line by line instead searching on a group of layers to allow a better control and identification
- **Tools:**
- **Change print parameters:**
- (Add) Tooltips to labels
- (Add) Sun UTF-8 to the Light PWM value unit to describe intensity
- (Improvement) Dynamic lifts: Round lift height and speed to 1 decimal
- (Fix) Exposure time finder: Time estimation when using 'Use different settings for layers with same Z positioning'
- **Prusa Slicer:**
- (Add) Note keyword: BottomWaitBeforeCure_xxx
- (Add) Note keyword: WaitBeforeCure_xxx
- (Add) Note keyword: BottomWaitAfterCure_xxx
- (Add) Note keyword: WaitAfterCure_xxx
- (Add) Note keyword: BottomWaitAfterLift_xxx
- (Add) Note keyword: WaitAfterLift_xxx
- (Change) Uniz IBEE: Remove light-off delay and implement wait time keywords
- **macOS:** (#236)
- (Remove) osx legacy packages from build and downloads
- (Fix) macOS: Simplify the libcvextern.dylib and remove libtesseract dependency
- (Fix) macOS: Include libusb-1.0.0.dylib
- Note: `brew install libusb` still required
- **UI:**
- (Fix) Refresh gcode does not update text on UI for ZIP, CWS, ZCODEX files
- (Fix) Operations: Import a .uvtop file by drag and drop into the UI would not load the layer range
- (Change) When convert a file, the result dialog will have Yes, No and Cancel actions, where No will open the converted file on current window, while Cancel will not perform any action (The old No behaviour)
- **Exposure time finder:**
- (Add) [ME] Option: 'Use different settings for layers with same Z positioning'
- (Add) [ME] Option: 'Lift height' for same Z positioned layers
- (Add) [ME] Option: 'Light-off delay' for same Z positioned layers
- (Improvement) Auto-detect and optimize the 'multiple exposures' test to decrease the print time, by set a minimal lift to almost none
- (Improvement) Better information on the thumbnail
- (Fix) Importing a profile would crash the application
- (Fix) Error with 'Pattern loaded model' fails when generating more models than build plate can afford (#239)
- **GCode:**
- (Fix) When the last layer have no lifts and a move to top command is set on end, that value were being set incorrectly as last layer position
- (Fix) Layer parsing from mm/s to mm/m bad convertion
- (Add) File formats: Setter `SuppressRebuildGCode` to disable or enable the gcode auto rebuild when needed, set this to false to manually write your own gcode
- (Fix) ZCode: Some test files come with layer height of 0mm on a property, in that case lookup layer height on the second property as fallback
- (Upgrade) EmguCV from 4.5.1 to 4.5.2
- **File formats:**
- (Add) Getter `IsAntiAliasingEmulated`: Gets whatever a file format uses real or emulated AntiAliasing
- (Add) Getter `IsDisplayPortrait`: Gets if the display is in portrait mode
- (Add) Getter `IsDisplayLandscape`: Gets if the display is in landscape mode
- **Tool - Resize:** (#235)
- (Fix) Division by 0 when start layer is equal to end layer
- (Fix) Calculations when using the option "Increase or decrease towards 100%"
- (Add) About window: OpenCV build number and a button to copy build information to clipboard
- (Improvement) Exposure exposure finder: Improve the **Multiple brightness** section to auto fill with correct values for file formats that use time fractions to emulate AntiAliasing, this can be used to replace the **Multiple exposures** section
- (Fix) UVJ: Error when using a null or empty layer array on manifest `config.json` file (#232)
- (Fix) GCode parser: When only a G4/wait command is present on a layer it was setting the global exposure time and discard the this value per layer
Tiago Conceição