v1.3.5

* (Add) Pixel Dimming: Chamfer - Allow the number of walls pixels to be gradually varied as the operation progresses from the starting layer to the ending layer (#106)
* (Add) PrusaSlicer print profiles: 0.01, 0.02, 0.03, 0.04, 0.15, 0.2
* (Change) Morph: "Fade" to "Chamfer" naming, created profiles need redo
* (Change) Pixel Dimming: Allow start with 0px walls when using "Walls Only"
* (Change) PrusaSlicer print profiles names, reduced bottom layers and raft height
* (Remove) PrusaSlicer print profiles with 3 digit z precision (0.025 and 0.035)
* (Fix) PW0, PWS, PWMX, PWMO, PWMS, PWX file formats, where 4 offsets (16 bytes) were missing on preview image, leading to wrong table size. Previous converted files with UVtools wont open from now on, you need to reconvert them. (ezrec/uv3dp#124)
* (Fix) Unable to run Re-Height tool due a rounding problem on some cases (#101)
* (Fix) Layer preview end with exception when no per layer settings are available (SL1 case)

CHANGELOG.md

@@ -1,5 +1,17 @@
 # Changelog
 
+## 04/11/2020 - v1.3.5
+
+* (Add) Pixel Dimming: Chamfer - Allow the number of walls pixels to be gradually varied as the operation progresses from the starting layer to the ending layer (#106)
+* (Add) PrusaSlicer print profiles: 0.01, 0.02, 0.03, 0.04, 0.15, 0.2
+* (Change) Morph: "Fade" to "Chamfer" naming, created profiles need redo
+* (Change) Pixel Dimming: Allow start with 0px walls when using "Walls Only"
+* (Change) PrusaSlicer print profiles names, reduced bottom layers and raft height
+* (Remove) PrusaSlicer print profiles with 3 digit z precision (0.025 and 0.035)
+* (Fix) PW0, PWS, PWMX, PWMO, PWMS, PWX file formats, where 4 offsets (16 bytes) were missing on preview image, leading to wrong table size. Previous converted files with UVtools wont open from now on, you need to reconvert them. (ezrec/uv3dp#124)
+* (Fix) Unable to run Re-Height tool due a rounding problem on some cases (#101)
+* (Fix) Layer preview end with exception when no per layer settings are available (SL1 case)
+
 ## 26/11/2020 - v1.3.4
 
 * (Add) Infill: CubicDynamicLink - Alternates centers with lateral links, consume same resin as center linked and make model/infill stronger.

PrusaSlicer/sla_print/Universal 0.01 - Heavy Supports.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:37:18 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:52:44 UTC
 compatible_printers = 
 compatible_printers_condition = 
 default_sla_print_profile = 
@@ -8,7 +8,7 @@ hollowing_enable = 0
 hollowing_min_thickness = 3
 hollowing_quality = 0.5
 inherits = 0.025 UltraDetail
-layer_height = 0.025
+layer_height = 0.01
 output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
 pad_around_object = 0
 pad_around_object_everywhere = 0
@@ -21,7 +21,7 @@ pad_object_connector_width = 0.5
 pad_object_gap = 1
 pad_wall_height = 0
 pad_wall_slope = 90
-pad_wall_thickness = 1
+pad_wall_thickness = 0.4
 sla_print_settings_id = 
 slice_closing_radius = 0.005
 support_base_diameter = 3

PrusaSlicer/sla_print/Universal 0.01 - Medium Supports.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:36:13 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:52:52 UTC
 compatible_printers = 
 compatible_printers_condition = 
 default_sla_print_profile = 
@@ -8,7 +8,7 @@ hollowing_enable = 0
 hollowing_min_thickness = 3
 hollowing_quality = 0.5
 inherits = 0.025 UltraDetail
-layer_height = 0.025
+layer_height = 0.01
 output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
 pad_around_object = 0
 pad_around_object_everywhere = 0
@@ -21,7 +21,7 @@ pad_object_connector_width = 0.5
 pad_object_gap = 1
 pad_wall_height = 0
 pad_wall_slope = 90
-pad_wall_thickness = 1
+pad_wall_thickness = 0.4
 sla_print_settings_id = 
 slice_closing_radius = 0.005
 support_base_diameter = 3

PrusaSlicer/sla_print/Universal 0.02 - Heavy Supports.ini

@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:51:04 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 6
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.025 UltraDetail
+layer_height = 0.02
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 1
+support_head_penetration = 0.6
+support_head_width = 2
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.5
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1

PrusaSlicer/sla_print/Universal 0.02 - Medium Supports.ini

@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:50:13 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 6
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.025 UltraDetail
+layer_height = 0.02
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.8
+support_head_penetration = 0.4
+support_head_width = 2
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.2
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1

PrusaSlicer/sla_print/Universal 0.03 - Heavy Supports.ini

@@ -1,14 +1,14 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:34:54 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:52:05 UTC
 compatible_printers = 
 compatible_printers_condition = 
 default_sla_print_profile = 
-faded_layers = 10
+faded_layers = 4
 hollowing_closing_distance = 2
 hollowing_enable = 0
 hollowing_min_thickness = 3
 hollowing_quality = 0.5
 inherits = 0.035 Detail
-layer_height = 0.035
+layer_height = 0.03
 output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
 pad_around_object = 0
 pad_around_object_everywhere = 0
@@ -21,7 +21,7 @@ pad_object_connector_width = 0.5
 pad_object_gap = 1
 pad_wall_height = 0
 pad_wall_slope = 90
-pad_wall_thickness = 1
+pad_wall_thickness = 0.4
 sla_print_settings_id = 
 slice_closing_radius = 0.005
 support_base_diameter = 3

PrusaSlicer/sla_print/Universal 0.03 - Medium Supports.ini

@@ -1,14 +1,14 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:34:31 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:52:15 UTC
 compatible_printers = 
 compatible_printers_condition = 
 default_sla_print_profile = 
-faded_layers = 10
+faded_layers = 4
 hollowing_closing_distance = 2
 hollowing_enable = 0
 hollowing_min_thickness = 3
 hollowing_quality = 0.5
 inherits = 0.035 Detail
-layer_height = 0.035
+layer_height = 0.03
 output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
 pad_around_object = 0
 pad_around_object_everywhere = 0
@@ -21,7 +21,7 @@ pad_object_connector_width = 0.5
 pad_object_gap = 1
 pad_wall_height = 0
 pad_wall_slope = 90
-pad_wall_thickness = 1
+pad_wall_thickness = 0.4
 sla_print_settings_id = 
 slice_closing_radius = 0.005
 support_base_diameter = 3

PrusaSlicer/sla_print/Universal 0.04 - Heavy Supports.ini

@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:53:43 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 4
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.05 Normal
+layer_height = 0.04
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 1
+support_head_penetration = 0.6
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.5
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1

PrusaSlicer/sla_print/Universal 0.04 - Medium Supports.ini

@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:53:55 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 4
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.05 Normal
+layer_height = 0.04
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.8
+support_head_penetration = 0.4
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.2
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1

PrusaSlicer/sla_print/Universal 0.05 - Heavy Supports.ini

@@ -1,8 +1,8 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:24:57 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:54:04 UTC
 compatible_printers = 
 compatible_printers_condition = 
 default_sla_print_profile = 
-faded_layers = 10
+faded_layers = 3
 hollowing_closing_distance = 2
 hollowing_enable = 0
 hollowing_min_thickness = 3
@@ -21,7 +21,7 @@ pad_object_connector_width = 0.5
 pad_object_gap = 1
 pad_wall_height = 0
 pad_wall_slope = 90
-pad_wall_thickness = 1
+pad_wall_thickness = 0.4
 sla_print_settings_id = 
 slice_closing_radius = 0.005
 support_base_diameter = 3

PrusaSlicer/sla_print/Universal 0.05 - Medium Supports.ini

@@ -1,8 +1,8 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:23:55 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:54:10 UTC
 compatible_printers = 
 compatible_printers_condition = 
 default_sla_print_profile = 
-faded_layers = 10
+faded_layers = 3
 hollowing_closing_distance = 2
 hollowing_enable = 0
 hollowing_min_thickness = 3
@@ -21,7 +21,7 @@ pad_object_connector_width = 0.5
 pad_object_gap = 1
 pad_wall_height = 0
 pad_wall_slope = 90
-pad_wall_thickness = 1
+pad_wall_thickness = 0.4
 sla_print_settings_id = 
 slice_closing_radius = 0.005
 support_base_diameter = 3

PrusaSlicer/sla_print/Universal 0.10 - Heavy Supports.ini

@@ -1,8 +1,8 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:30:54 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:55:43 UTC
 compatible_printers = 
 compatible_printers_condition = 
 default_sla_print_profile = 
-faded_layers = 10
+faded_layers = 3
 hollowing_closing_distance = 2
 hollowing_enable = 0
 hollowing_min_thickness = 3
@@ -21,7 +21,7 @@ pad_object_connector_width = 0.5
 pad_object_gap = 1
 pad_wall_height = 0
 pad_wall_slope = 90
-pad_wall_thickness = 1
+pad_wall_thickness = 0.4
 sla_print_settings_id = 
 slice_closing_radius = 0.005
 support_base_diameter = 3

PrusaSlicer/sla_print/Universal 0.10 - Medium Supports.ini

@@ -1,8 +1,8 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-09-05 at 15:51:14 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:55:50 UTC
 compatible_printers = 
 compatible_printers_condition = 
 default_sla_print_profile = 
-faded_layers = 10
+faded_layers = 3
 hollowing_closing_distance = 2
 hollowing_enable = 0
 hollowing_min_thickness = 3
@@ -21,7 +21,7 @@ pad_object_connector_width = 0.5
 pad_object_gap = 1
 pad_wall_height = 0
 pad_wall_slope = 90
-pad_wall_thickness = 1
+pad_wall_thickness = 0.4
 sla_print_settings_id = 
 slice_closing_radius = 0.005
 support_base_diameter = 3

PrusaSlicer/sla_print/Universal 0.15 - Heavy Supports.ini

@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:57:42 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 3
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.1 Fast
+layer_height = 0.15
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 1
+support_head_penetration = 0.7
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.5
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1

PrusaSlicer/sla_print/Universal 0.15 - Medium Supports.ini

@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:57:49 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 3
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.1 Fast
+layer_height = 0.15
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.9
+support_head_penetration = 0.5
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.3
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1

PrusaSlicer/sla_print/Universal 0.20 - Heavy Supports.ini

@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:58:16 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 3
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.1 Fast
+layer_height = 0.2
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 1
+support_head_penetration = 0.7
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.5
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1

PrusaSlicer/sla_print/Universal 0.20 - Medium Supports.ini

@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:58:26 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 3
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.1 Fast
+layer_height = 0.2
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.9
+support_head_penetration = 0.5
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.3
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1

UVtools.Cmd/UVtools.Cmd.csproj

@@ -20,7 +20,7 @@
   </PropertyGroup>
 
   <ItemGroup>
-    <PackageReference Include="System.CommandLine" Version="2.0.0-beta1.20427.1" />
+    <PackageReference Include="System.CommandLine" Version="2.0.0-beta1.20574.7" />
   </ItemGroup>
 
   <ItemGroup>

UVtools.Core/Extensions/MathExtensions.cs

@@ -7,6 +7,7 @@
  */
 
 using System;
+using System.Globalization;
 
 namespace UVtools.Core.Extensions
 {
@@ -76,5 +77,38 @@ namespace UVtools.Core.Extensions
 
             return value;
         }
+
+        public static uint DecimalDigits(this float val)
+        {
+            var valStr = val.ToString(CultureInfo.InvariantCulture).TrimEnd('0');
+            if (string.IsNullOrEmpty(valStr)) return 0;
+
+            var index = valStr.IndexOf('.');
+            if (index < 0) return 0;
+
+            return (uint) (valStr.Substring(index).Length - 1);
+        }
+
+        public static uint DecimalDigits(this double val)
+        {
+            var valStr = val.ToString(CultureInfo.InvariantCulture).TrimEnd('0');
+            if (string.IsNullOrEmpty(valStr)) return 0;
+
+            var index = valStr.IndexOf('.');
+            if (index < 0) return 0;
+
+            return (uint)(valStr.Substring(index).Length - 1);
+        }
+
+        public static uint DecimalDigits(this decimal val)
+        {
+            var valStr = val.ToString(CultureInfo.InvariantCulture).TrimEnd('0');
+            if (string.IsNullOrEmpty(valStr) || valStr[valStr.Length-1] == '.') return 0;
+
+            var index = valStr.IndexOf('.');
+            if (index < 0) return 0;
+
+            return (uint)(valStr.Substring(index).Length - 1);
+        }
     }
 }

UVtools.Core/FileFormats/PhotonWorkshopFile.cs

@@ -268,6 +268,11 @@ namespace UVtools.Core.FileFormats
             /// </summary>
             [FieldOrder(3)] public uint Height { get; set; } = 168;
 
+            [FieldOrder(4)] public uint Offset1 { get; set; }
+            [FieldOrder(5)] public uint Offset2 { get; set; }
+            [FieldOrder(6)] public uint Offset3 { get; set; }
+            [FieldOrder(7)] public uint Offset4 { get; set; }
+
             [Ignore] public uint DataSize => Width * Height * 2;
 
             // little-endian 16bit colors, RGB 565 encoded.
@@ -1133,7 +1138,7 @@ namespace UVtools.Core.FileFormats
                     Debug.Write("Preview -> ");
                     Debug.WriteLine(PreviewSettings);
 
-                    //PreviewSettings.Validate((int) PreviewSettings.DataSize);
+                    PreviewSettings.Validate((int) PreviewSettings.DataSize);
 
                     PreviewSettings.Data = new byte[PreviewSettings.DataSize];
                     inputFile.ReadBytes(PreviewSettings.Data);

UVtools.Core/Layer/Layer.cs

@@ -839,13 +839,24 @@ namespace UVtools.Core
                 alternatePatternMask = patternMask;
             }
 
+            int wallThickness = LayerManager.MutateGetIterationChamfer(
+                Index,
+                operation.LayerIndexStart,
+                operation.LayerIndexEnd,
+                (int)operation.WallThicknessStart,
+                (int)operation.WallThicknessEnd,
+                operation.Chamfer
+                );
+
+
             using (Mat dst = LayerMat)
             using (Mat erode = new Mat())
             using (Mat diff = new Mat())
             {
                 Mat target = operation.GetRoiOrDefault(dst);
 
-                CvInvoke.Erode(target, erode, kernel, anchor, (int) operation.WallThickness, BorderType.Reflect101, default);
+
+                CvInvoke.Erode(target, erode, kernel, anchor, wallThickness, BorderType.Reflect101, default);
                 CvInvoke.Subtract(target, erode, diff);
 
                 

UVtools.Core/Layer/LayerManager.cs

@@ -494,7 +494,7 @@ namespace UVtools.Core
             });
         }
 
-        private void MutateGetVarsIterationFade(uint startLayerIndex, uint endLayerIndex, int iterationsStart, int iterationsEnd, ref bool isFade, out float iterationSteps, out int maxIteration)
+        public static void MutateGetVarsIterationChamfer(uint startLayerIndex, uint endLayerIndex, int iterationsStart, int iterationsEnd, ref bool isFade, out float iterationSteps, out int maxIteration)
         {
             iterationSteps = 0;
             maxIteration = 0;
@@ -504,7 +504,7 @@ namespace UVtools.Core
             maxIteration = Math.Max(iterationsStart, iterationsEnd);
         }
 
-        private int MutateGetIterationVar(bool isFade, int iterationsStart, int iterationsEnd, float iterationSteps, int maxIteration, uint startLayerIndex, uint layerIndex)
+        public static int MutateGetIterationVar(bool isFade, int iterationsStart, int iterationsEnd, float iterationSteps, int maxIteration, uint startLayerIndex, uint layerIndex)
         {
             if (!isFade) return iterationsStart;
             // calculate iterations based on range
@@ -513,7 +513,15 @@ namespace UVtools.Core
                 : iterationsStart - (layerIndex - startLayerIndex) * iterationSteps);
 
             // constrain
-            return Math.Min(Math.Max(1, iterations), maxIteration);
+            return Math.Min(Math.Max(0, iterations), maxIteration);
+        }
+
+        public static int MutateGetIterationChamfer(uint layerIndex, uint startLayerIndex, uint endLayerIndex, int iterationsStart,
+            int iterationsEnd, bool isFade)
+        {
+            MutateGetVarsIterationChamfer(startLayerIndex, endLayerIndex, iterationsStart, iterationsEnd, ref isFade,
+                out float iterationSteps, out int maxIteration);
+            return MutateGetIterationVar(isFade, iterationsStart, iterationsEnd, iterationSteps, maxIteration, startLayerIndex, layerIndex);
         }
 
         public void Morph(OperationMorph operation, BorderType borderType = BorderType.Default, MCvScalar borderValue = default, OperationProgress progress = null)
@@ -521,8 +529,8 @@ namespace UVtools.Core
             if (progress is null) progress = new OperationProgress();
             progress.Reset(operation.ProgressAction, operation.LayerRangeCount);
 
-            var isFade = operation.FadeInOut;
+            var isFade = operation.Chamfer;
-            MutateGetVarsIterationFade(
+            MutateGetVarsIterationChamfer(
                 operation.LayerIndexStart,
                 operation.LayerIndexEnd,
                 (int) operation.IterationsStart,

UVtools.Core/Operations/OperationLayerReHeight.cs

@@ -10,6 +10,7 @@ using System;
 using System.Collections.Generic;
 using System.Globalization;
 using System.Text;
+using UVtools.Core.Extensions;
 using UVtools.Core.Objects;
 
 namespace UVtools.Core.Operations
@@ -65,32 +66,24 @@ namespace UVtools.Core.Operations
 
         public static OperationLayerReHeightItem[] GetItems(uint layerCount, decimal layerHeight)
         {
-            List<OperationLayerReHeightItem> list = new List<OperationLayerReHeightItem>();
+            var list = new List<OperationLayerReHeightItem>();
-            for (byte i = 2; i < 255; i++) // Lower
+            for (byte i = 2; i < 255; i++) // Go lower heights
             {
                 if (layerHeight / i < 0.01m) break;
-                var countStr = (layerCount / (decimal)i).ToString(CultureInfo.InvariantCulture);
+                if ((layerCount * (decimal)i).DecimalDigits() > 0) continue; // Cant multiply layers, no half layers!
-                if (countStr.IndexOf(".", StringComparison.Ordinal) >= 0) continue; // Cant multiply layers
+                if ((layerHeight / i).DecimalDigits() > 2) continue; // Cant divide height, more than 2 digits
-                countStr = (layerHeight / i).ToString(CultureInfo.InvariantCulture);
-                int decimalCount = countStr.Substring(countStr.IndexOf(".", StringComparison.Ordinal)).Length - 1;
-                if (decimalCount > 2) continue; // Cant multiply height
 
-                var item = new OperationLayerReHeightItem(false, i, layerHeight / i, layerCount * i);
+                var item = new OperationLayerReHeightItem(false, i, Math.Round(layerHeight / i, 2), layerCount * i);
                 list.Add(item);
             }
 
-            for (byte i = 2; i < 255; i++) // Higher
+            for (byte i = 2; i < 255; i++) // Go higher heights
             {
                 if (layerHeight * i > 0.2m) break;
-                var countStr = (layerCount / (decimal)i).ToString(CultureInfo.InvariantCulture);
+                if ((layerCount / (decimal)i).DecimalDigits() > 0) continue; // Cant divide layers, no half layers!
-                if (countStr.IndexOf(".", StringComparison.Ordinal) >= 0) continue; // Cant multiply layers
+                if ((layerHeight * i).DecimalDigits() > 2) continue; // Cant multiply height, more than 2 digits
 
-
+                var item = new OperationLayerReHeightItem(true, i, Math.Round(layerHeight * i, 2), layerCount / i);
-                countStr = (layerHeight * i).ToString(CultureInfo.InvariantCulture);
-                int decimalCount = countStr.Substring(countStr.IndexOf(".", StringComparison.Ordinal)).Length - 1;
-                if (decimalCount > 2) continue; // Cant multiply height
-
-                var item = new OperationLayerReHeightItem(true, i, layerHeight * i, layerCount / i);
                 list.Add(item);
             }
 

UVtools.Core/Operations/OperationMorph.cs

@@ -19,7 +19,7 @@ namespace UVtools.Core.Operations
         private MorphOp _morphOperation = MorphOp.Erode;
         private uint _iterationsStart = 1;
         private uint _iterationsEnd = 1;
-        private bool _fadeInOut;
+        private bool _chamfer;
 
         #region Overrides
 
@@ -80,10 +80,10 @@ namespace UVtools.Core.Operations
             set => RaiseAndSetIfChanged(ref _iterationsEnd, value);
         }
 
-        public bool FadeInOut
+        public bool Chamfer
         {
-            get => _fadeInOut;
+            get => _chamfer;
-            set => RaiseAndSetIfChanged(ref _fadeInOut, value);
+            set => RaiseAndSetIfChanged(ref _chamfer, value);
         }
 
         [XmlIgnore]
@@ -91,7 +91,7 @@ namespace UVtools.Core.Operations
 
         public override string ToString()
         {
-            var result = $"[{_morphOperation}] [Iterations: {_iterationsStart}/{_iterationsEnd}] [Fade: {_fadeInOut}]" + LayerRangeString;
+            var result = $"[{_morphOperation}] [Iterations: {_iterationsStart}/{_iterationsEnd}] [Chamfer: {_chamfer}]" + LayerRangeString;
             if (!string.IsNullOrEmpty(ProfileName)) result = $"{ProfileName}: {result}";
             return result;
         }
@@ -102,7 +102,7 @@ namespace UVtools.Core.Operations
 
         private bool Equals(OperationMorph other)
         {
-            return _morphOperation == other._morphOperation && _iterationsStart == other._iterationsStart && _iterationsEnd == other._iterationsEnd && _fadeInOut == other._fadeInOut;
+            return _morphOperation == other._morphOperation && _iterationsStart == other._iterationsStart && _iterationsEnd == other._iterationsEnd && _chamfer == other._chamfer;
         }
 
         public override bool Equals(object obj)
@@ -117,7 +117,7 @@ namespace UVtools.Core.Operations
                 var hashCode = (int) _morphOperation;
                 hashCode = (hashCode * 397) ^ (int) _iterationsStart;
                 hashCode = (hashCode * 397) ^ (int) _iterationsEnd;
-                hashCode = (hashCode * 397) ^ _fadeInOut.GetHashCode();
+                hashCode = (hashCode * 397) ^ _chamfer.GetHashCode();
                 return hashCode;
             }
         }

UVtools.Core/Operations/OperationPixelDimming.cs

@@ -17,8 +17,10 @@ namespace UVtools.Core.Operations
     [Serializable]
     public class OperationPixelDimming : Operation
     {
-        private uint _wallThickness = 5;
+        private uint _wallThicknessStart = 5;
+        private uint _wallThicknessEnd = 5;
         private bool _wallsOnly;
+        private bool _chamfer;
         private Matrix<byte> _pattern;
         private Matrix<byte> _alternatePattern;
         private ushort _alternatePatternPerLayers = 1;
@@ -44,10 +46,10 @@ namespace UVtools.Core.Operations
         public override StringTag Validate(params object[] parameters)
         {
             var sb = new StringBuilder();
-            if (WallThickness == 0 && WallsOnly)
+            /*if (WallThicknessStart == 0 && WallsOnly)
             {
                 sb.AppendLine("Border size must be positive in order to use \"Dim only borders\" function.");
-            }
+            }*/
 
             if (Pattern is null && AlternatePattern is null)
             {
@@ -60,10 +62,16 @@ namespace UVtools.Core.Operations
 
         #region Properties
 
-        public uint WallThickness
+        public uint WallThicknessStart
         {
-            get => _wallThickness;
+            get => _wallThicknessStart;
-            set => RaiseAndSetIfChanged(ref _wallThickness, value);
+            set => RaiseAndSetIfChanged(ref _wallThicknessStart, value);
+        }
+
+        public uint WallThicknessEnd
+        {
+            get => _wallThicknessEnd;
+            set => RaiseAndSetIfChanged(ref _wallThicknessEnd, value);
         }
 
         public bool WallsOnly
@@ -72,6 +80,12 @@ namespace UVtools.Core.Operations
             set => RaiseAndSetIfChanged(ref _wallsOnly, value);
         }
 
+        public bool Chamfer
+        {
+            get => _chamfer;
+            set => RaiseAndSetIfChanged(ref _chamfer, value);
+        }
+
         /// <summary>
         /// Use the alternate pattern every <see cref="AlternatePatternPerLayers"/> layers
         /// </summary>
@@ -108,7 +122,7 @@ namespace UVtools.Core.Operations
 
         public override string ToString()
         {
-            var result = $"[Border: {_wallThickness}px] [Only borders: {_wallsOnly}] [Alternate every: {_alternatePatternPerLayers}]" + LayerRangeString;
+            var result = $"[Border: {_wallThicknessStart}px to {_wallThicknessEnd}px] [Chamfer: {_chamfer}] [Only borders: {_wallsOnly}] [Alternate every: {_alternatePatternPerLayers}]" + LayerRangeString;
             if (!string.IsNullOrEmpty(ProfileName)) result = $"{ProfileName}: {result}";
             return result;
         }
@@ -119,7 +133,7 @@ namespace UVtools.Core.Operations
 
         protected bool Equals(OperationPixelDimming other)
         {
-            return _wallThickness == other._wallThickness && _wallsOnly == other._wallsOnly;
+            return _wallThicknessStart == other._wallThicknessStart && _wallsOnly == other._wallsOnly;
         }
 
         public override bool Equals(object obj)
@@ -134,7 +148,7 @@ namespace UVtools.Core.Operations
         {
             unchecked
             {
-                return ((int) _wallThickness * 397) ^ _wallsOnly.GetHashCode();
+                return ((int) _wallThicknessStart * 397) ^ _wallsOnly.GetHashCode();
             }
         }
 

UVtools.Core/UVtools.Core.csproj

@@ -10,7 +10,7 @@
     <RepositoryUrl>https://github.com/sn4k3/UVtools</RepositoryUrl>
     <PackageProjectUrl>https://github.com/sn4k3/UVtools</PackageProjectUrl>
     <Description>MSLA/DLP, file analysis, repair, conversion and manipulation</Description>
-    <Version>1.3.4</Version>
+    <Version>1.3.5</Version>
     <Copyright>Copyright © 2020 PTRTECH</Copyright>
     <PackageIcon>UVtools.png</PackageIcon>
     <Platforms>AnyCPU;x64</Platforms>

UVtools.GUI/Controls/Tools/CtrlToolMorph.cs

@@ -36,7 +36,7 @@ namespace UVtools.GUI.Controls.Tools
             base.UpdateOperation();
             Operation.IterationsStart = (uint) nmIterationsStart.Value;
             Operation.IterationsEnd = (uint) nmIterationsEnd.Value;
-            Operation.FadeInOut = cbIterationsFade.Checked;
+            Operation.Chamfer = cbIterationsFade.Checked;
             Operation.MorphOperation = (MorphOp)((StringTag) cbMorphOperation.SelectedItem).Tag;
             Operation.Kernel.Anchor = ctrlKernel.KernelAnchor;
             Operation.Kernel.Matrix = ctrlKernel.GetMatrix();

UVtools.GUI/Controls/Tools/CtrlToolPixelDimming.cs

@@ -43,7 +43,7 @@ namespace UVtools.GUI.Controls.Tools
         public override bool UpdateOperation()
         {
             base.UpdateOperation();
-            Operation.WallThickness = (uint) nmBorderSize.Value;
+            Operation.WallThicknessStart = (uint) nmBorderSize.Value;
             Operation.WallsOnly = cbDimsOnlyBorders.Checked;
 
 

UVtools.InstallerMM/UVtools.InstallerMM.wxs

@@ -1003,29 +1003,53 @@
               </Component>
             </Directory>
             <Directory Id="owd324203F33CD6B2D491618D3D363F997F" Name="sla_print">
-              <Component Id="owc41FE63F25880E5E4D3CEA71EBD852385" Guid="1ba12bdd-a46f-fc86-8cc3-7da5b8f14609">
+              <Component Id="owc988205CB4C2FC6EA3D41704B657C5681" Guid="5dd3f394-0e58-76db-f891-78c219b5339e">
-                <File Id="owf41FE63F25880E5E4D3CEA71EBD852385" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.025 UltraDetail - Heavy Supports.ini" KeyPath="yes" />
+                <File Id="owf988205CB4C2FC6EA3D41704B657C5681" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.01 - Heavy Supports.ini" KeyPath="yes" />
               </Component>
-              <Component Id="owcA0B8FBCBD1A4173B45BA94F0E1E1C67E" Guid="0128c1a1-a9c4-ee47-bf69-56e64bdbf266">
+              <Component Id="owc4F3C7BA82787F7CE088482EF33C78BC7" Guid="93f4648f-2a87-6bb3-7307-e3b2fe27591f">
-                <File Id="owfA0B8FBCBD1A4173B45BA94F0E1E1C67E" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.025 UltraDetail - Medium Supports.ini" KeyPath="yes" />
+                <File Id="owf4F3C7BA82787F7CE088482EF33C78BC7" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.01 - Medium Supports.ini" KeyPath="yes" />
               </Component>
-              <Component Id="owcF7480920216B5D545244DAD3B157F915" Guid="37497b06-511e-8000-454b-f6cc91ad8e3c">
+              <Component Id="owc32F3B55EC604E72AB3E2CBF3284ED826" Guid="064f01a1-52a6-8f88-a160-13fee848444c">
-                <File Id="owfF7480920216B5D545244DAD3B157F915" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.035 Detail - Heavy Supports.ini" KeyPath="yes" />
+                <File Id="owf32F3B55EC604E72AB3E2CBF3284ED826" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.02 - Heavy Supports.ini" KeyPath="yes" />
               </Component>
-              <Component Id="owc3EC82AA8BBA5F58285C6B572699C3EEA" Guid="51996820-0c91-375a-d43a-a71610706d06">
+              <Component Id="owc43A40112BBFB048562D12C4E2E58C8B5" Guid="01e92245-916a-7b5a-e545-a7c6394041f5">
-                <File Id="owf3EC82AA8BBA5F58285C6B572699C3EEA" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.035 Detail - Medium Supports.ini" KeyPath="yes" />
+                <File Id="owf43A40112BBFB048562D12C4E2E58C8B5" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.02 - Medium Supports.ini" KeyPath="yes" />
               </Component>
-              <Component Id="owcC4EC407B090C47EBE3ABDE911C434B63" Guid="4bcff130-af1a-1715-f04f-8b22e50680dd">
+              <Component Id="owcA27D4D8B15C011B3790643C4A1B00661" Guid="249c6c1e-5613-e22c-fd9f-36d549071815">
-                <File Id="owfC4EC407B090C47EBE3ABDE911C434B63" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.05 Normal - Heavy Supports.ini" KeyPath="yes" />
+                <File Id="owfA27D4D8B15C011B3790643C4A1B00661" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.03 - Heavy Supports.ini" KeyPath="yes" />
               </Component>
-              <Component Id="owc5C47C07A27D86292990E17E9F5C68987" Guid="57884306-5184-0776-b0be-5aaf576ff822">
+              <Component Id="owc34F74C04D60157E217A40D1B948F4B62" Guid="1016acd9-7e5e-6764-1511-e4dba988d3f2">
-                <File Id="owf5C47C07A27D86292990E17E9F5C68987" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.05 Normal - Medium Supports.ini" KeyPath="yes" />
+                <File Id="owf34F74C04D60157E217A40D1B948F4B62" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.03 - Medium Supports.ini" KeyPath="yes" />
               </Component>
-              <Component Id="owcB8B31F13E6BE0274BB89D48BB3C5DA65" Guid="3eaaf9a4-3327-7d66-a578-42c8a53214de">
+              <Component Id="owc7904A21F5D16A27BDCBF240575031DE0" Guid="46bbf031-1607-56f4-3b51-f8f627a1f7f4">
-                <File Id="owfB8B31F13E6BE0274BB89D48BB3C5DA65" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.1 Fast - Heavy Supports.ini" KeyPath="yes" />
+                <File Id="owf7904A21F5D16A27BDCBF240575031DE0" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.04 - Heavy Supports.ini" KeyPath="yes" />
               </Component>
-              <Component Id="owcD02936F8537D5E1A8838BA53E493CA0B" Guid="05d01723-d21f-c5de-e159-54d916c4865c">
+              <Component Id="owc2B441689691FEC00B7B263EAD5C86002" Guid="36d4eee3-4ef4-135a-78b3-22e7daa37092">
-                <File Id="owfD02936F8537D5E1A8838BA53E493CA0B" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.1 Fast - Medium Supports.ini" KeyPath="yes" />
+                <File Id="owf2B441689691FEC00B7B263EAD5C86002" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.04 - Medium Supports.ini" KeyPath="yes" />
+              </Component>
+              <Component Id="owc815E6AD1B21376FEEF54113695A5C221" Guid="08a67749-8d90-9d25-d535-d5a0c8b2b7dd">
+                <File Id="owf815E6AD1B21376FEEF54113695A5C221" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.05 - Heavy Supports.ini" KeyPath="yes" />
+              </Component>
+              <Component Id="owcB7DCBF9D6771C07DED7DFD3475A2B942" Guid="2b6a6b3b-cc19-fb01-850e-2b82c9959d05">
+                <File Id="owfB7DCBF9D6771C07DED7DFD3475A2B942" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.05 - Medium Supports.ini" KeyPath="yes" />
+              </Component>
+              <Component Id="owc0D8987D85101CB001DC4DC10FA5289AD" Guid="8b33c25d-8466-ad61-abdd-485fdf1b686e">
+                <File Id="owf0D8987D85101CB001DC4DC10FA5289AD" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.10 - Heavy Supports.ini" KeyPath="yes" />
+              </Component>
+              <Component Id="owc50D2BF90F467F36608822CBBEA7AAD24" Guid="7816893f-d916-c266-286e-c305755f4274">
+                <File Id="owf50D2BF90F467F36608822CBBEA7AAD24" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.10 - Medium Supports.ini" KeyPath="yes" />
+              </Component>
+              <Component Id="owc4ED39C8A5521E8D8F652122F1391BEE7" Guid="f5d525d9-36a8-8f20-7132-a3837ac667c8">
+                <File Id="owf4ED39C8A5521E8D8F652122F1391BEE7" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.15 - Heavy Supports.ini" KeyPath="yes" />
+              </Component>
+              <Component Id="owc67CE50B90C2334EE96FD81F894C657CE" Guid="91a69bac-800a-7280-0763-0a907778bbea">
+                <File Id="owf67CE50B90C2334EE96FD81F894C657CE" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.15 - Medium Supports.ini" KeyPath="yes" />
+              </Component>
+              <Component Id="owc4EBB2288E3F6027567BCA149BD247731" Guid="c36f9208-8fe7-e520-313f-eac6f7487c10">
+                <File Id="owf4EBB2288E3F6027567BCA149BD247731" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.20 - Heavy Supports.ini" KeyPath="yes" />
+              </Component>
+              <Component Id="owc33EDBA249FAD8C66CFD67EF0812F9D99" Guid="7b49a51b-8a43-11c8-de4c-4e82552700fc">
+                <File Id="owf33EDBA249FAD8C66CFD67EF0812F9D99" Source="$(var.SourceDir)\Assets\PrusaSlicer\sla_print\Universal 0.20 - Medium Supports.ini" KeyPath="yes" />
               </Component>
             </Directory>
           </Directory>

UVtools.WPF/Controls/Tools/ToolLayerReHeightControl.axaml.cs

@@ -8,7 +8,7 @@ namespace UVtools.WPF.Controls.Tools
     {
         public OperationLayerReHeight Operation => BaseOperation as OperationLayerReHeight;
 
-        public OperationLayerReHeight.OperationLayerReHeightItem[] Presets { get; } = OperationLayerReHeight.GetItems(
+        public OperationLayerReHeight.OperationLayerReHeightItem[] Presets => OperationLayerReHeight.GetItems(
             App.SlicerFile.LayerCount,
             (decimal)App.SlicerFile.LayerHeight);
 

UVtools.WPF/Controls/Tools/ToolMorphControl.axaml

@@ -10,7 +10,7 @@
     <Grid RowDefinitions="Auto,10,Auto" ColumnDefinitions="Auto,10,*">
       <TextBlock
         ToolTip.Tip="Selects the number of iterations/passes to perform on each layer using this mutator.
-  &#x0a;Enable the 'Fade in/out' to fade the iteration over layers, you can use a start iteration higher than end to perform a inverse fade.
+  &#x0a;Enable the 'Chamfer' to chamfer the iteration over layers, you can use a start iteration higher than end to perform a inverse chamfer.
   &#x0a;WARNING: Using high iteration values can destroy your model depending on the mutator being used, please use low values or with caution!"
       VerticalAlignment="Center"
       Text="Iterations:"/>
@@ -30,19 +30,19 @@
         <TextBlock
           VerticalAlignment="Center"
           Text="To:"
-          IsEnabled="{Binding Operation.FadeInOut}"/>
+          IsEnabled="{Binding Operation.Chamfer}"/>
 
         <NumericUpDown
           Minimum="1"
           Width="70"
           Value="{Binding Operation.IterationsEnd}"
-          IsEnabled="{Binding Operation.FadeInOut}"
+          IsEnabled="{Binding Operation.Chamfer}"
           />
 
         <CheckBox
           ToolTip.Tip="Allow the number of iterations to be gradually varied as the operation progresses from the starting layer to the ending layer."
-          Content="Fade in/out"
+          Content="Chamfer"
-          IsChecked="{Binding Operation.FadeInOut}"
+          IsChecked="{Binding Operation.Chamfer}"
           />
       </StackPanel>
 

UVtools.WPF/Controls/Tools/ToolPixelDimmingControl.axaml

@@ -14,11 +14,33 @@
         Minimum="0"
         Maximum="1000"
         Width="80"
-        Value="{Binding Operation.WallThickness}"
+        Value="{Binding Operation.WallThicknessStart}"
+        />
+
+
+      <TextBlock
+        VerticalAlignment="Center"
+        Text="To:"
+        IsEnabled="{Binding Operation.Chamfer}"
+        />
+      <NumericUpDown
+        Minimum="0"
+        Maximum="1000"
+        Width="80"
+        Value="{Binding Operation.WallThicknessEnd}"
+        IsEnabled="{Binding Operation.Chamfer}"
         />
       <TextBlock
         VerticalAlignment="Center"
         Text="px"
+        IsEnabled="{Binding Operation.Chamfer}"
+        />
+
+      <CheckBox
+        Margin="20,0,0,0"
+        Content="Chamfer walls"
+        ToolTip.Tip="Allow the number of walls pixels to be gradually varied as the operation progresses from the starting layer to the ending layer."
+        IsChecked="{Binding Operation.Chamfer}"
         />
 
       <CheckBox

UVtools.WPF/MainWindow.Information.cs

@@ -342,13 +342,19 @@ namespace UVtools.WPF
             //CurrentLayerProperties.Add(new StringTag(nameof(layer.BoundingRectangle), layer.BoundingRectangle.ToString()));
             //CurrentLayerProperties.Add(new StringTag(nameof(layer.NonZeroPixelCount), layer.NonZeroPixelCount.ToString()));
             CurrentLayerProperties.Add(new StringTag(nameof(layer.ExposureTime), $"{layer.ExposureTime.ToString(CultureInfo.InvariantCulture)}s"));
-            if(SlicerFile.PrintParameterPerLayerModifiers.Contains(FileFormat.PrintParameterModifier.LiftHeight))
+
-                CurrentLayerProperties.Add(new StringTag(nameof(layer.LiftHeight), $"{layer.LiftHeight.ToString(CultureInfo.InvariantCulture)}mm @ {layer.LiftSpeed.ToString(CultureInfo.InvariantCulture)}mm/min"));
+            if (ReferenceEquals(SlicerFile.PrintParameterPerLayerModifiers, null)) return;
+
+            if (SlicerFile.PrintParameterPerLayerModifiers.Contains(FileFormat.PrintParameterModifier.LiftHeight))
+                CurrentLayerProperties.Add(new StringTag(nameof(layer.LiftHeight),
+                    $"{layer.LiftHeight.ToString(CultureInfo.InvariantCulture)}mm @ {layer.LiftSpeed.ToString(CultureInfo.InvariantCulture)}mm/min"));
             //CurrentLayerProperties.Adnew StringTagg>(nameof(layer.LiftSpeed), $"{layer.LiftSpeed.ToString(CultureInfo.InvariantCulture)}mm/min"));
             if (SlicerFile.PrintParameterPerLayerModifiers.Contains(FileFormat.PrintParameterModifier.RetractSpeed))
-                CurrentLayerProperties.Add(new StringTag(nameof(layer.RetractSpeed), $"{layer.RetractSpeed.ToString(CultureInfo.InvariantCulture)}mm/min"));
+                CurrentLayerProperties.Add(new StringTag(nameof(layer.RetractSpeed),
+                    $"{layer.RetractSpeed.ToString(CultureInfo.InvariantCulture)}mm/min"));
             if (SlicerFile.PrintParameterPerLayerModifiers.Contains(FileFormat.PrintParameterModifier.LayerOffTime))
-                CurrentLayerProperties.Add(new StringTag(nameof(layer.LayerOffTime), $"{layer.LayerOffTime.ToString(CultureInfo.InvariantCulture)}s"));
+                CurrentLayerProperties.Add(new StringTag(nameof(layer.LayerOffTime),
+                    $"{layer.LayerOffTime.ToString(CultureInfo.InvariantCulture)}s"));
             if (SlicerFile.PrintParameterPerLayerModifiers.Contains(FileFormat.PrintParameterModifier.LightPWM))
                 CurrentLayerProperties.Add(new StringTag(nameof(layer.LightPWM), layer.LightPWM.ToString()));
         }

UVtools.WPF/UVtools.WPF.csproj

@@ -12,7 +12,7 @@
     <PackageLicenseFile>LICENSE</PackageLicenseFile>
     <RepositoryUrl>https://github.com/sn4k3/UVtools</RepositoryUrl>
     <RepositoryType>Git</RepositoryType>
-    <Version>1.3.4</Version>
+    <Version>1.3.5</Version>
   </PropertyGroup>
   
   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|AnyCPU'">